Parts for Electrolux E36GF76HPS2: 07 - Body Parts

This front control panel houses and protects the oven/range console, providing the surface and mounting for the touchpads, buttons, and display. Replaces a cracked, faded, or damaged control surface to restore appliance appearance and button access. What it does:

• Provides the finished front surface for the console and the mounting area for controls and display
• Protects underlying electronics from spills, grease, and light impact
• Restores access to buttons/touchpads that stick, crack, or no longer register properly
• Helps improve the appliance's cosmetic appearance when the original panel is dented or discolored

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Remove adjacent trim or bezels as needed; handle the panel carefully to avoid scratching the finish
• Keep screws and small fasteners organized; some connectors or overlays may need to be transferred from the old panel

This control panel is the front console trim that houses the user interface for your range or oven, restoring a clean, functional surface and button access so controls operate and look like new. What it does:

• Provides the cosmetic and protective front surface for the appliance control area
• Secures and aligns push-buttons, touchpads, and display openings
• Restores proper button actuation when cracked, warped, or damaged
• Helps prevent dirt and moisture from reaching internal electronics

• One control panel

• Disconnect power at the breaker or unplug the appliance before starting any work
• Remove mounting screws and any attached trims or bezels to access the panel
• Handle carefully to avoid scratching the finish or damaging attached clips

Mounting screw for gas ranges. Secures internal components and panels. Replace if screw is stripped, missing, or damaged during appliance service.

This glass shelf replaces a cracked or worn interior shelf to restore stable, easy-to-clean storage space in your refrigerator. Tempered glass provides a flat surface for food containers and helps keep items organized and visible. What it does:

• Provides a sturdy, level surface for storing food, containers and leftovers
• Replaces broken, chipped or scratched shelves that can trap spills or block airflow
• Helps maintain interior organization so items are easier to find
• Smooth glass surface wipes clean quickly to remove spills and crumbs

• One tempered glass refrigerator shelf

• Remove food and any loose items from the shelf area before installing
• Slide shelf into the existing support rails or brackets until it sits securely
• Handle glass carefully and wear gloves to avoid injury from edges

Broiler pan rack for electric ovens and ranges. Replaces cracked, warped, or missing racks. Installs inside broiler pan for elevated cooking.

This control panel is the outer console that houses the oven/range user interface and protects internal controls. It restores the appliance's front appearance and provides a stable mounting surface for buttons, displays, and switches. What it does

• Replaces a cracked, faded, or warped front console to restore the appliance's appearance
• Provides the mounting surface and openings for the control keypad, display, and selector switches
• Helps protect internal electronic components from spills and debris
• Can stop erratic input caused by damaged or loose panel areas around buttons

• One control panel (outer/console) as shown

• Installation requires removing the range/oven console trim and disconnecting power before starting
• Handle with care to avoid scratching the finish; align mounting tabs and secure with factory screws
• Ensure connectors are reattached correctly before restoring power

This control-panel switch restores reliable on/off control of a selected function on your range or wall oven. Replacing a worn or intermittent switch helps ensure the appliance responds consistently when you toggle that function.

• Directs power to the associated circuit when switched on or off
• Common symptoms: function won't turn on/off, intermittent operation, or the switch feels loose/sticks
• Helps restore positive, consistent control from the backguard/control panel

• Disconnect power at the breaker before servicing
• Access the switch from the control panel/backguard; retain screws/clips
• Label/photograph wire positions and transfer leads one at a time to the new switch
• Ensure firm terminal connections, reassemble, restore power, and test operation

Mounting bracket secures range components to the cabinet or frame. Replace if bracket is bent, cracked, or broken to restore proper alignment and support.

Fix an oven door that won't lock during self-clean or clean cycle errors. This door latch assembly secures the door and reports lock status to the control.

Replace your range oven door seal to maintain heat efficiency and prevent energy loss. Essential when you notice gaps, cracks, or heat escaping. Verify fit.

Replace a cracked, broken, or missing oven door spacer that maintains proper alignment and gap between door components. Installs in door assembly.

This refrigerator door gasket creates a tight seal around the door edge to help maintain proper temperature and energy efficiency. It replaces a worn or torn seal to reduce warm air leaks and improve cooling performance. What it does:

• Seals the refrigerator door to keep cold air in and warm air out
• Helps prevent frost buildup and uneven temperatures inside the compartment
• Reduces compressor run-time caused by air leaks
• Common symptom: warped, cracked, or compressed gasket that no longer seals

• One refrigerator door gasket

• Inspect door edge and mounting channel; clean before installing the new gasket
• Gasket may need to be warmed or eased into the channel for a snug fit
• If the door is misaligned or hinge issues exist, address them before gasket replacement
• Turn off power to the appliance or disconnect before doing any repairs; wear work gloves to avoid sharp edges

Fix F1, F3, or F10 error codes and inaccurate oven temperatures with this sensor. Simple DIY replacement takes about 30 minutes with basic tools.

This refrigerator cabinet insulation reduces energy loss and helps maintain even temperatures for reliable food preservation. It fits behind the liner to improve cooling efficiency and reduce frost buildup when installed correctly. What it does:

• Provides thermal barrier between cabinet shell and interior liner to help maintain set temperatures
• Helps prevent condensation and reduces frost formation on evaporator and interior surfaces
• Restores proper insulation when damaged, torn, or missing, improving compressor runtime and temperature stability
• Works with factory mounting locations and shapes to seal gaps around the cabinet

• Turn off power to the appliance and unplug before beginning any repair.
• Remove interior liners or panels as required to access factory insulation.
• Replace only the damaged insulation; avoid compressing or bunching material during installation.
• Use proper protective gloves and a dust mask when handling older insulation to avoid irritation.

Spacer for ranges and ovens. Maintains proper spacing between components. Replace if worn, cracked, or missing to ensure correct alignment and fit.

Replace a cracked or missing power board spacer in your range. This insulating bushing mounts between the control board and chassis for proper spacing.

This inner cabinet liner replaces a cracked, stained or warped freezer interior to restore a clean, smooth surface and help contain spills. It provides the molded interior surface that holds shelves and drawers in place. What it does:

• Restores the freezer's interior skin that supports shelves, bins, and seals
• Stops drafts and moisture from getting behind the liner when warped or damaged
• Prevents food contact with cracked or stained surfaces that can harbor odors
• Helps maintain proper airflow paths inside the freezer cabinet

• Disconnect power and empty the freezer before starting work
• Removal and installation may require removing trim pieces, shelves, and fasteners; keep track of mounting hardware
• Handle carefully to avoid cracking the replacement liner during install

Fix F95 error code or oven door that won't lock during self-clean cycle. This door lock motor assembly repair takes about 15 minutes with basic tools.

Range won't start or respond to controls? This electronic control board restores operation by managing timing and power to key components for proper cycles.

Replace a cracked, broken, or missing access panel cover on your range or oven. Secures internal components, restores finished appearance, and shields wiring.

Fix a range cooling fan that won't shut off or makes howling noises with this motor. Requires removing oven from cabinet and back panel access.

Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.

This is a nut that is used in many microwave ovens. It is typically used to hold interior fan in place. A nut is a fastener that is used to hold two items together or keep one component secure against a surface. Use and time can cause the nut to become stripped, damaged, or broken. If the nut is broken, it will no longer hold the fan in the right location. The nut will need to be replaced.Before replacing this part, the microwave should be unplugged. Open the refrigerator door and remove the cover that goes over the fan. The nut can then be removed using a nut driver. Replace the other parts before using the appliance.This nut is used in microwave ovens manufactured by Crosley, Electrolux, Frigidaire, and Kenmore. It is sold as a single part. This is an authentic OEM replacement part is sourced directly from the manufacturer.

Fix noisy convection fan operation with this motor replacement. Restores quiet, even heating in your oven. Moderate DIY repair in 30-60 minutes.

Bake element restores oven heat by producing the radiant heat needed for baking and roasting. Replacing a worn or damaged bake element helps the oven reach and maintain set temperatures for more consistent cooking results. What it does:

• Heats the oven cavity to provide direct radiant heat for baking and roasting.
• Use when the element shows visible breaks, blistering, or does not glow when the oven is set to high.
• Common symptom indicators: oven won't reach set temperature, uneven baking, or longer-than-normal cook times.
• Works as a direct replacement for the oven's lower/bake heating element.

• Disconnect power at the breaker or unplug the appliance before starting any repair.
• Allow the oven to cool completely and wear gloves to avoid sharp edges.
• Match the part to your model and terminal layout before installing; tighten connections securely.

Replace your worn or missing range spacer to restore proper component alignment and spacing. This small plastic part maintains correct clearances inside the unit.

Replacement mounting screw for ovens and ranges. Secures panels, brackets, and components. Order a new screw if yours is stripped, missing, or damaged.

Mounting screw for electric range and wall oven assembly. Secures internal components and panels. Replace if stripped, missing, or damaged during repair.

Mounting screw for ranges, ovens, and cooktops. Secures panels, brackets, or internal components. Replace if missing, stripped, or damaged.

Replacement 10-24 x 5/8 screw for securing panels, brackets, and trim on ranges and ovens. Needed when original hardware is stripped, missing, or worn.

Mounting screw for electric range, oven, or wall oven assembly. Secures internal components and panels. Replace if stripped, missing, or damaged.

Replacement #8 x 0.500 inch screw for securing panels, trim, and brackets in appliances. Needed when original fasteners are stripped, lost, or missing.

Specs: 8 - 18 x 0.500

Fastens panels, brackets, and covers inside your range or oven. Replace this screw if missing, stripped, or rusted to secure components properly.

Spacer that maintains proper gap between components in your range or oven assembly. Replace if missing, worn, or damaged to restore correct fit and alignment.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head