Need Help?
Call or text
Show parts
Control panel for wall ovens. Replaces cracked, damaged, or worn panels. Installs on the front of the oven to restore the exterior finish and appearance.
Usually ships within 4 - 14 days
This part is discontinued by the manufacturer and is no longer available for purchase.
Broiler pan rack for electric ovens and ranges. Replaces cracked, warped, or missing racks. Installs inside broiler pan for elevated cooking.
The Rack is an OEM part for Frigidaire ranges. It provides a sturdy surface for placing cookware and baking sheets, allowing for even cooking and optimal heat circulation within the oven.
Causes of a bad rack can include prolonged exposure to high temperatures, heavy loads causing the rack to bend or warp, and normal wear and tear from frequent use.
Symptoms of a bad Rack include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Oven broiler pan catches drippings and supports food during broiling. Replace this pan if yours is warped, damaged, or missing for safe cooking and easier cleanup.
Broiler pan insert sits under the broiler burner to catch drips and grease. Replace if cracked, warped, or heavily stained for cleaner broiling.
Creates a watertight barrier at critical joints inside your dishwasher. Replace when flattened, cracked, or missing to stop leaks and protect components.
Oven not responding to buttons or features won't activate? This control switch restores reliable operation by opening and closing electrical circuits.
Oven lamp assembly illuminates your oven cavity for safe cooking. Replace if bulb burns out or lens breaks. Includes halogen bulb, lens, and wiring.
Oven won't reach or hold set temperature? A faulty temperature sensor causes inaccurate heating. This monitor probe ensures consistent cooking results.
Replace your oven temperature probe if your meat thermometer feature isn't working or gives inaccurate readings. Simple plug-in installation in minutes.
Receptacle assembly for electric and gas ranges. Connects power supply to heating elements. Replace if cracked, melted, or showing burn marks.
Replace your damaged or worn wall oven control panel. This cosmetic panel covers the control area and installs on the front of your appliance unit.
Insulation for wall ovens. Installs between oven cavity and outer cabinet. Replace if damaged, compressed, or missing to restore heat retention.
Shield component for wall ovens and microwave combos. Replaces damaged, cracked, or missing shields. Installs inside the unit for protection.
Range won't power on or tripped breaker? Burnt or loose terminal block connections are often the cause. This kit restores safe power delivery. DIY-friendly.
If your oven won't heat or heats unevenly, this heating element restores proper temperature control. Straightforward DIY fix for most ranges.
Oven not heating or baking unevenly? A failed bake element is often the cause. This replacement requires pulling the oven out to access the rear panel.
Heat shield for ranges and wall ovens. Protects internal components from excessive heat. Replace if cracked, warped, or damaged to prevent overheating.
Replace a cracked, damaged, or missing shield in your wall oven or microwave combo. This protective panel installs behind components to prevent wear.
Internal shield for wall ovens and microwave combos. Replaces damaged, cracked, or missing shields. Installs inside the unit for proper protection.
Receptacle block for electric ranges and wall ovens. Mounts in the rear panel to provide electrical connection. Replace if cracked, melted, or damaged.
Control panel cover for electric ranges and ovens. Replaces cracked, discolored, or damaged covers on the front panel. Restores appearance.
Oven not heating evenly or fan not running? This convection fan motor circulates hot air for consistent baking. Direct-fit part for most repairs.
Decorative trim piece that fits along the door edge of your electric wall oven. Replace if cracked, chipped, discolored, or missing to restore appearance.
Replacement mounting bracket that secures internal oven components. Install when original is cracked, bent, or missing to restore proper alignment and support.
Fix uneven baking or no convection heating with this electric wall oven fan motor. Powers air circulation for even cooking. Moderate DIY repair.
Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.
Securing nut for ovens and ranges. Holds interior components like convection fans in place. Replace if stripped, damaged, or missing during repair.
Oven won't heat after self-cleaning? This high-limit thermostat cuts power when temperatures get too high. Moderately easy DIY repair fix.
Fix F045 convection fan motor error codes with this wall oven motor replacement. Restores even baking and proper air circulation. DIY repair part.
Reinforces and supports oven door glass panels. Replace if original stiffener is bent, cracked, or missing to properly secure glass in the door frame.
Oven won't heat up or takes too long to reach temperature? This convection element restores proper heating. DIY-friendly repair, typically done in 30-45 minutes.
Positions and supports range components to maintain proper alignment. Replace if cracked, broken, or missing to prevent rubbing and ensure panels fit correctly.
Restores proper airflow and ventilation around heating elements. This trim piece covers the top front vent opening to ensure safe temperature regulation.
Fix leaking or no water flow to your ice maker or dispenser. This water line tube routes water inside your refrigerator. Direct-fit replacement part.
Mounting screw for electric and gas ranges. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.
Fix intermittent or failed component operation with this wiring harness assembly. Restores reliable electrical connections between range components.
Wiring harness assembly that routes power and signals between your wall oven's control and components. Replace when harness is damaged or corroded.
Replacement mounting screw for wall ovens. Secures interior or exterior panels and components. Order new screws if originals are stripped or missing.
Wiring harness for wall ovens. Connects electrical components inside the oven cavity. Replace if wires are frayed, burned, or connections are loose.
Secures internal panels or components to the range frame. Replace this mounting bracket if bent, broken, or missing to restore stable support and alignment.
Hex flange nut with 10-32 thread secures components in appliances. Replace if stripped, missing, or damaged. Flange provides broader bearing surface.
Replacement mounting screw for range power and control boards. Secures electrical board connections. Needed when original screw is missing or damaged.
Replacement mounting screw for ovens and ranges. Secures internal components and panels. Order a new screw if the original is stripped, missing, or damaged.
Replacement mounting screw for ovens and ranges. Secures panels, brackets, trim, and internal components. Replace missing or stripped screws to restore fit.
Spacer that maintains proper gap between components in your range or oven assembly. Replace if missing, worn, or damaged to restore correct fit and alignment.
Replacement screw secures panels, trim, and internal components in your appliance. Needed when original fastener is missing, stripped, or damaged.
Restores bright interior lighting so you can monitor cooking without opening the door. Replace when bulb is dim, flickering, or burned out. Confirm fit.
Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.