Parts for Ge EDW2030F00WW: 02 - Body Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Replacement mounting screw for securing handles, panels, and internal components. Needed when original screws are stripped, lost, or broken during repairs.

Door won't close or latch properly? This latch keeper secures the door strike so your dishwasher stays closed during cycles. Quick DIY repair.

Size: 10-24 x 1/2 inch.

Replacement bracket that secures the flood switch in your dishwasher. Holds the leak detection switch in proper position. Needed when bracket is cracked or broken.

Replaces cracked, kinked, or chewed drain hose that carries wastewater from your dishwasher to household plumbing. Essential for proper drainage function.

This float switch detects rising water in the refrigerator drain pan or lower cabinet area and signals the appliance control to help prevent overflow and water damage. Use it to replace a failed or intermittent water-level sensor. What it does:

• Senses high water level in the drain pan or collection area and closes the circuit to alert the control.
• Helps identify causes of leaks and pooling under or behind the appliance.
• Commonly used when symptoms include water on the floor, drip pan overflow, or water-related error/alert conditions.
• Matches OEM function for refrigeration units that include a float-based water-detection circuit.

• Disconnect power to the appliance before starting any repairs; shut off the water supply if working near water lines.
• Access may require removing lower kick plate or back panel; handle plastic clips and fasteners carefully.
• Disconnect electrical connector gently and note orientation before installing the replacement; secure wiring and verify float moves freely.
• Restore power and run a short test cycle or simulate water level to ensure proper operation.

Fix a dishwasher that won't drain completely with this piston and nut valve assembly. Simple DIY repair when water remains in tub after cycles.

Replaces broken or cracked 3rd level spray arm assembly that mounts at the top of the tub. Includes mounting tabs and collar for secure installation.

Used to supply water to the upper spray washarm.

Middle spray arm assembly that directs pressurized water to the dishwasher's mid-level rack for improved cleaning coverage. Replacing a damaged or clogged arm helps restore spray rotation and reduce poor cleaning on the middle rack. What it does:

• Delivers rotating spray to the middle rack to rinse and wash dishes and utensils.
• Restores proper spray coverage when the arm is cracked, broken, clogged, or not rotating.
• Helps reduce leftover food, spots, and uneven cleaning on items in the middle rack.
• Integrates with the dishwasher's spray system to distribute water evenly across the mid-level.

What's included: One middle spray arm assembly. Install notes:

• Always disconnect power to the dishwasher at the breaker before beginning any service.
• Remove the middle rack to access the spray arm; follow the OEM instructions for removal and replacement.
• Inspect spray holes and rotation after installation and run a short test cycle to confirm operation.

Replacement slide rail for dishwasher upper rack. Installs on cabinet wall to guide rack in and out. Needed when original is bent, twisted, or broken.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Replacement 15-tine comb for dishwasher lower or upper dishrack. Restores proper dish spacing when original tines are cracked, broken, or missing.

Replacement 15-tine comb for dishwasher lower or upper dishrack. Restores proper dish spacing when original tines are cracked, broken, or missing.

Left side. Color: white. It measures about 1 inch high by 1-1/2 inches deep.

This plastic comb-shaped retainer holds the right-hand row of dish-holding tines in place on your dishwasher rack. It keeps the tines properly aligned and prevents them from falling out during wash cycles. Replace this part if tines are loose, falling out, or if the comb is cracked or broken.

NOTE: Can use dishrack WD28X31819 with silverware basket WD28X265.

Covers the electrical junction box where the power cord enters your dishwasher. Replace if cracked, broken, or missing to protect wiring connections.

Dishwasher not filling with water? A faulty water inlet valve is often the cause. This valve controls water flow into your dishwasher. 20-30 minute fix.

Replace your cracked, broken, or worn dishwasher silverware basket. Sits in the lower rack to hold and separate utensils during wash cycles.

Replace your cracked, broken, or worn dishwasher silverware basket. Sits in the lower rack to hold and separate utensils during wash cycles.

Specs: 10 - 32 t hex 7/16 s

Routes water from inlet valve to tub. Replace if cracked, leaking at connections, or worn from age. Installs between valve and tub exterior connection point.

Secures washer hoses at pump, tub, and valve connections to prevent leaks and hose blow-offs. Replace worn or missing clamps for a tight seal. Confirm fit.

Secures dishwasher cabinet to chassis for improved stability. Replace if original brackets are broken, missing, or causing movement and panel gaps.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.