Parts for Electrolux E23BC78IPS5: 07 - Cabinet Parts

Removes odors and keeps food fresh. Replace every 6 months for optimal performance. Located in the door under dairy compartment. Confirm fit by model.

Fan cover for bottom-mount refrigerators. Protects the fan assembly from debris. Replace if cracked, broken, or missing to maintain proper airflow.

Refrigerator making loud noises or not cooling? A worn evaporator fan blade often causes these issues. DIY-friendly repair typically takes 30 minutes.

Replaces worn or damaged shaft support bushing in your refrigerator. Cushions rotating shafts to reduce friction and noise. Order a new bushing today.

Seals the coil cover area to maintain proper airflow and prevent dust buildup. Replace if worn, cracked, or losing seal efficiency. Verify fit with your model.

Covers the factory test opening on your refrigerator cabinet or liner. Replace if missing, cracked, or damaged to restore a finished look and seal.

Foam insulation for refrigerator air supply ducts. Replaces worn, compressed, or missing foam that reduces cooling efficiency and airflow in your fridge.

Fix SY EF error codes or warm refrigerator temperatures with this evaporator fan motor. Moderate DIY repair restores air circulation and cooling.

Fix a refrigerator light that won't turn on or off when the door opens or closes. This door-activated light switch is a simple 5-minute DIY repair.

This cover-damper is the plastic airflow housing that protects and directs cold-air damper components so the refrigerator can regulate fresh-food compartment temperature more reliably. What it does

• Houses and protects the damper assembly that controls airflow from the freezer to the fresh-food section
• Directs and seals airflow to help maintain even temperatures in the refrigerator compartment
• Failsafe symptom language: replace if the damper cover is cracked, broken, or missing, or if you notice uneven temperatures, warm spots, or reduced cold air delivery
• Helps prevent air leaks that can cause frost buildup or cause the refrigerator to run longer than normal

• One cover-damper housing

• Disconnect power to the appliance before beginning any repair
• Remove shelves/panels as needed to access the damper; handle plastic tabs gently to avoid breakage
• Align the cover with the damper assembly and snap or fasten into place without forcing
• If the damper or related parts are damaged, inspect and replace those components as needed for proper operation

Seals the air duct connection to prevent air leaks and maintain consistent temperatures. Replace when worn, cracked, or causing temperature issues.

This air duct directs internal airflow to help maintain proper circulation and temperature control inside the appliance. It replaces a damaged or cracked duct to restore consistent airflow and reduce uneven cooling or heating. What it does:

• Channels air through the appliance to support normal temperature regulation
• Helps prevent localized hot or cold spots by keeping airflow consistent
• Reduces moisture buildup and frost formation by maintaining proper circulation
• Restores fit and alignment where a cracked or broken duct was letting air escape

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Require removal of exterior panels and use of basic hand tools (screwdriver, nut driver)
• Inspect mounting clips or screws and replace if damaged; tighten fasteners to secure the duct

Replacement screw fastener for securing panels, trim, and components inside your refrigerator. Needed when original screws are stripped or missing.

Secures panels, brackets, and internal components in your refrigerator. Replace when the original fastener is missing, stripped, or corroded for proper fit.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

Adjustable front roller assembly for refrigerators. Supports appliance weight and allows leveling adjustments. Replace if roller is damaged or bolt is broken.

Secures internal components to the refrigerator frame. Replace this mounting bracket if the original is bent, broken, or missing to restore alignment.

Washer for bottom-mount refrigerators. Replaces lost, damaged, or worn washers used to secure components. Essential for proper assembly and fit.

Lower door hinge for bottom-mount refrigerators. Secures the door to the cabinet frame. Replace if cracked, stripped, or causing door misalignment.

Lower door hinge provides the pivot point for your refrigerator door. Replaces worn, damaged, or broken hinges that cause door sagging or misalignment.

Plastic spacer that mounts between refrigerator door components to maintain proper alignment and spacing. Replace if cracked, broken, or missing.

Door spacer for bottom-mount refrigerators. Maintains proper spacing between door panels and cabinet. Replace if cracked, missing, or worn to prevent rubbing.

OEM mounting bracket that secures the hinge and pin assembly inside your refrigerator. Replace if cracked, broken, or missing to restore proper alignment.

Supports and aligns the refrigerator door at the hinge pivot point. Replace if cracked, bent, or worn to restore stable door operation and proper sealing.

Trim cap that covers the upper door hinge assembly. Restores finished appearance and protects hinge area. Replace if cracked, broken, or missing.

Covers and protects the upper door hinge area on your refrigerator. Replace if cracked, broken, or missing to restore a finished look.

Left-hand gray upper hinge cover snaps over the top door hinge to conceal hardware and restore a finished look. Replace when cracked, broken, or missing.

Hex head screw secures refrigerator door hinges to the cabinet. Replace if missing, stripped, or lost during moves or repairs. 1/4-20 thread size.

Adjustable front roller assembly for refrigerators. Supports appliance weight and allows leveling adjustments. Replace if roller is damaged or bolt is broken.

Replacement screw for securing panels, components, and assemblies in appliances. Needed when original screws are stripped, lost, or damaged during repair.

Refrigerator harness retaining clip secures wiring in place. Replace if broken or loose to prevent wire damage. Confirm fit with your model number.

Fix unresponsive buttons, communication errors, or defrost issues. This refrigerator switch control board restores electronic controls and system functions.

Fix unresponsive controls or a non-functional display with this refrigerator control board. Restores button and panel function for reliable operation.

Refrigerator door guide channel that helps align and support the door mechanism. Replace if cracked, broken, or worn to restore proper door alignment.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.

Replacement screw for refrigerator panels, brackets, and covers. Secures interior and exterior components. Needed when original is missing, stripped, or corroded.

Adjustable leveling foot installs at the bottom of your appliance to ensure stability and proper leveling. Replace if broken, cracked, or missing.

Decorative toe grille kit that covers the base of your refrigerator. Replace this panel if yours is cracked, scratched, or missing for a clean finish.

Small bearing insert that supports the refrigerator door stop mechanism. Replace when worn, cracked, or causing loose door alignment and excess play.

Replace a stripped, missing, or damaged set screw that secures refrigerator or freezer door handles. Requires 3/32" allen wrench for installation.

Hex washer head screw for washers and laundry centers. Replaces missing, stripped, or damaged screws during repairs or component replacement.

Insulated cardboard cover assembly that installs on the rear bottom of your refrigerator. Replaces a cracked, torn, or missing original cover.

Fixes incorrect temperature readings and short cycling. This thermistor monitors fridge temps and signals the control board. Moderate DIY repair.

Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.

Interior light won't turn on when door opens? This push-button door switch restores automatic lighting. Moderate DIY repair with basic tools.

Molded plastic evaporator cover that protects the freezer coil assembly and directs airflow. Replace if cracked, broken, or missing for proper cooling.

Replace your refrigerator's air duct if cracked, broken, or missing. This duct directs airflow between compartments for proper temperature control.

Fix a fridge that's freezing food or not cooling properly. This air damper controls cold airflow between compartments. Moderate DIY repair for most models.

Seals the air damper opening to maintain proper airflow between compartments. Replace if torn or compressed to fix uneven cooling and drafts.

Refrigerator not cooling or ice maker stopped working? This main control board fixes temperature regulation and ice production issues. Moderate DIY repair.

Seals refrigerator door to maintain temperature and reduce energy loss. Replace if worn, torn, or compressed to restore cooling efficiency. Verify fit.

Seals refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or causing temperature issues. Verify fit with model number.

Secures the evaporator fan motor to its bracket for proper airflow. Replace if broken or missing to eliminate vibration, noise, or cooling issues.

Protective cover for EPS foam insulation in your refrigerator. Replace if cracked, broken, or missing to maintain proper insulation and appearance.

Foam sleeve insulation that wraps around the refrigerator air duct. Replace worn, torn, or missing insulation to reduce condensation and moisture buildup.

Fixes incorrect temperature readings and excessive frost buildup in refrigerators. This sensor monitors air temperature to control compressor cycles.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

Directs cold air from the evaporator through your freezer compartment. Snaps into the back wall. Replace if cracked, warped, or missing to restore airflow.

Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.