Parts for Whirlpool 4K5SS: 04 - Case, Gearing And Planetary Parts

This gearcase housing is the molded enclosure that supports and protects the motor drive gears, keeping them aligned for reliable rotation. It restores proper gear engagement and prevents debris from entering the drive area. What it does:

• Houses and positions the motor drive gears so the drive system turns smoothly
• Protects internal gears from lint, dust, and moisture that can cause wear or jamming
• Helps maintain correct gear alignment to reduce noise, grinding, or slipping during operation
• Supports the motor/gear assembly for consistent power transfer to the drivetrain

• Install with original fasteners and proper torque to maintain alignment
• Inspect gears, seals, and nearby components; replace any worn parts while housing is accessible
• Disconnect power and follow manufacturer safety procedures before attempting service

This gearcase housing is the molded outer case that supports and protects the washer transmission/gearcase assembly, keeping internal gears aligned for reliable spin and agitation performance. What it does

• Replaces a cracked, broken or warped gearcase outer housing that can cause gearbox misalignment
• Restores correct mounting and support for the transmission and related internal gears
• Helps stop wobbling, grinding noises or agitation/spin issues caused by a damaged housing
• Preserves seals and internal components by providing correct enclosure and alignment

• Inspect surrounding seals, fasteners and the gearcase for wear while replacing the housing
• Disconnect power and water supply before beginning work; drain tub and follow manufacturer safety procedures
• Use correct fasteners and torque per OEM specifications to avoid leaks or misalignment

This motor housing is the outer mounting component that secures and protects the appliance motor, helping keep the motor aligned and reducing vibration for quieter operation. Choose the correct color/finish variant for your unit. What it does:

• Provides a stable mounting point for the motor to prevent misalignment and excessive movement
• Protects the motor from debris and contact with adjacent parts
• Helps reduce motor vibration and related noise during operation
• Used to restore proper motor positioning when worn, cracked, or bent housing causes rubbing or abnormal sounds

• One motor housing (color/finish depends on selected variant)

• Disconnect power before beginning service; follow all safety warnings for your appliance
• Basic disassembly (cabinet/drum removal) is typically required to access and replace the housing
• Inspect mounting hardware and gaskets; replace any damaged fasteners or seals as needed
• If symptoms persist after replacement (noise, rubbing, excessive vibration), check motor mounts, blower, and alignment

This white hub cover replaces a cracked or missing wash-tub hub cap to restore the washer's finished appearance and protect the hub hardware from debris. It snaps into place for a clean center finish. What it does:

• Covers the center hub and fastener to prevent dirt buildup and reduce corrosion risk
• Restores the washer's cosmetic appearance when the original cap is cracked or missing
• Helps prevent items from catching on the exposed hub during load rotation
• Common symptom: visible broken or missing center cap, exposed bolt or hub

• One white hub cover

• Disconnect power to the appliance before attempting any repair
• This part typically snaps onto the hub; inspect the hub and surrounding components for damage and replace other parts as needed
• Use only the exact replacement part number to ensure proper fit

The Hub Cap is an OEM replacement part is for Whirlpool stand mixers. The cap hub is a small part at the top of your mixer which you remove when adding an attachment such as the pastamaker. To replace this part, simply unscrew the knob to the right of the cap, and remove and replace the cap.

Causes of a bad hub cap can include cracks or punctures developing over extended use periods. Excessive downward force on heavy mixing attachments may also damage the cap over time.

Symptoms of a bad hub cap include:

• Fluids leaking into the base or motor areas during mixing
• Moisture or messes within the stand mixer body
• Inability to maintain suction or vacuum when using attachments

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Grey Thumb Screw is an OEM Replacement Part designed for securing attachments on 4.5 and 5 Whirlpool and KitchenAid quart mixers. This screw plays a critical role in ensuring the stable and secure connection of various mixer attachments. With a user-friendly design, it offers easy installation without the need for additional tools. It can be installed by hand-screwing.

The Thumb Screw is an OEM replacement part for Whirlpool stand mixers. It acts as a fastener for securely attaching mixing attachments like the flat beater, whisk, or dough hook onto the power hub. Color: Black. It measures about 1-½” wide by ¾” high.

Causes of a bad thumb screw can include wear and tear from repeated securing and loosening of mixing attachments over time. 

Symptoms of a bad thumb screw include:

• Mixing tools detaching or falling off during use  
• Difficulty attaching or removing attachments
• Looseness where the screw mounts to the power hub

This OEM Whirlpool part is also compatible with KitchenAid, Kenmore, and some Bosch and Breville stand mixers.

This Trim Band is the outer-facing trim piece that restores the finished edge and appearance of the appliance door or opening. It replaces bent, cracked, or missing trim to help the appliance look and seal properly. What it does:

• Covers and protects the outer edge of the door/opening for a finished look
• Restores proper alignment where bent or damaged trim prevents a snug fit
• Helps prevent dirt and moisture intrusion at the door edge
• Addresses visual damage such as dents, cracks, or peeling finish

• One Trim Band as shown

• Disconnect power (and gas if applicable) before starting any repair
• Handle edges carefully—trim parts can be sharp
• Use basic hand tools; for detailed instructions

This is a genuine replacement screw used to secure panels, brackets, and components on compatible Whirlpool appliances. It restores proper fastening so loose parts stop rattling and panels stay aligned. What it does

• Fastens trim, panels, brackets, or mounting hardware to appliance chassis
• Helps stop vibration and rattling caused by missing or stripped fasteners
• Restores secure connections after repair or part replacement
• Matches OEM thread specification to fit intended mounting holes

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand and tighten until snug; do not overtighten
• Inspect mating threads and replace if damaged

This spacer washer helps set and maintain the correct spacing between mating components. It cushions contact points to reduce wear, noise, and misalignment for smoother, longer-lasting operation.

• Maintains accurate spacing between parts for proper alignment
• Helps reduce friction and metal-to-metal wear
• Can quiet rubbing or squeaking from misaligned components
• Useful when play or uneven gap causes intermittent performance issues

• Disconnect power and, if applicable, shut off gas before servicing
• Note the original washer's location and orientation for reassembly
• Inspect mating surfaces for wear or debris and clean before installation
• Do not force parts together; verify proper fit and stack-up thickness

The Worm Gear is an OEM part for Whirlpool mixers. This part drives the rotation of the planetary assembly. The planetary assembly is where the mixer's accessories attach.

You should replace the worm gear if it becomes worn out or damaged. Causes of a bad worm gear can include excessive strain from heavy or dense mixing tasks, lack of lubrication, or general wear and tear over time. 

Symptoms of a bad worm gear include:

• The mixer attachments not turning
• Grinding or clicking noises during operation
• The mixer motor running but the attachments remaining stationary

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This spacer washer helps set and maintain the correct spacing between mating components. It cushions contact points to reduce wear, noise, and misalignment for smoother, longer-lasting operation.

• Maintains accurate spacing between parts for proper alignment
• Helps reduce friction and metal-to-metal wear
• Can quiet rubbing or squeaking from misaligned components
• Useful when play or uneven gap causes intermittent performance issues

• Disconnect power and, if applicable, shut off gas before servicing
• Note the original washer's location and orientation for reassembly
• Inspect mating surfaces for wear or debris and clean before installation
• Do not force parts together; verify proper fit and stack-up thickness

This bearing supports a rotating shaft or assembly inside the appliance, reducing friction for smooth, quiet operation. Replacing a worn bearing restores proper alignment and helps prevent noise and premature wear on connected parts.

• Provides a low-friction surface for smooth rotation
• Helps keep the rotating component centered and stable
• Reduces vibration and operating noise
• Common failure signs: grinding/squealing, wobble or play, rough or intermittent rotation

• Disconnect power; also shut off water or gas supply if applicable
• Access the assembly per your model's service information and note part orientation before removal
• Inspect the shaft/hub and any spacers or seals for wear; replace related worn components
• Seat the bearing squarely—do not force; apply only manufacturer-specified lubricant if called for in service literature

This shaft-and-pinion assembly uses a 10-tooth pinion to transfer drive through the geartrain. Replacing a worn or stripped unit restores proper gear mesh and smooth, reliable power to the driven components.

• Transfers motor rotation through the geartrain via a 10-tooth pinion on a precision shaft
• Maintains correct gear engagement and alignment to minimize noise and wear
• Typical symptoms: grinding/clicking from the gearcase, output not turning or slipping under load, intermittent drive, or visibly rounded/broken teeth
• Can also reduce wobble or excessive play at the driven shaft

• Disconnect power before servicing; wear cut-resistant gloves and eye protection
• Access the drive/gearcase, note gear order and orientation (take photos for reference)
• Inspect mating gears and bushings; clean debris and replace any worn parts
• Apply manufacturer-specified grease to the gear teeth/bearings and confirm smooth rotation by hand before reassembly

The Retaining Pin is an OEM part for Whirlpool stand mixers. It secures various components within the mixer, such as the beater shaft or attachments, ensuring they remain firmly in place during operation.  

Common causes of a faulty retaining pin include wear and tear from regular use, accidental impacts, or stress from overloading the mixer.

Symptoms of a bad retaining pin include:

• Attachments or components becoming loose or falling out during use
• Difficulty in attaching or removing mixer components
• Visible bending, damage, or wear on the pin
• Unusual noises or vibrations during mixer operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This vertical center shaft aligns and drives the rotating components in the refrigerator's ice dispenser/crusher assembly, helping cubes and crushed ice dispense smoothly. Replacing a worn or stripped shaft restores reliable dispensing performance.

• Centers and supports the crusher/dispenser components for smooth operation
• Transfers drive from the dispenser motor through the crushing mechanism
• Helps prevent jams and binding caused by misalignment or wear
• Common symptoms: ice not dispensing, no crush function, grinding/clicking noises, wobbling shaft or visible wear

• Unplug the refrigerator before servicing; handle sharp crusher blades with cut-resistant gloves
• Remove the ice bin and disassemble the crusher housing on a flat work surface
• Note the order of blades, spacers, washers, and any clips; transfer them to the new shaft in the same sequence
• Reinstall the bin, ensure the drive coupling engages fully, restore power, and test dispensing

The Mixer Hub Gear Kit is an OEM part for Whirlpool mixers. This kit includes the gears necessary to transfer motor power to the mixing attachments, ensuring efficient and consistent mixing performance.

Causes of a bad mixer hub gear kit can include wear and tear from frequent use, overloading the mixer with heavy ingredients, and lack of proper maintenance or lubrication. Over time, gears can wear down, crack, or break, leading to decreased performance or complete failure.

Symptoms of a bad mixer hub gear kit include:

• Mixer attachments not turning or moving inconsistently
• Grinding or unusual noises during operation
• Reduced mixing power or performance
• Mixer not operating at all

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Mixer Hub Gear Kit is an OEM part for Whirlpool mixers. This kit includes the gears necessary to transfer motor power to the mixing attachments, ensuring efficient and consistent mixing performance.

Causes of a bad mixer hub gear kit can include wear and tear from frequent use, overloading the mixer with heavy ingredients, and lack of proper maintenance or lubrication. Over time, gears can wear down, crack, or break, leading to decreased performance or complete failure.

Symptoms of a bad mixer hub gear kit include:

• Mixer attachments not turning or moving inconsistently
• Grinding or unusual noises during operation
• Reduced mixing power or performance
• Mixer not operating at all

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Small but critical: this retaining pin secures the drive components in the planetary so your stand mixer transmits power reliably to the beater and attachments, helping restore steady mixing when the original pin is missing or worn.

What it does

• Locks the gear/shaft connection inside the planetary for positive drive
• Helps address symptoms like beater not turning, intermittent drive, or a loose/descending planetary
• Works in conjunction with the worm-follower and bevel/pinion gears
• Useful when the original pin is damaged during service or shears under load

What’s included
One retaining (dowel) pin, sold individually.

Install notes

• Unplug the mixer; lay it on its side and support the planetary
• Drive the old pin out with a small punch; align and tap the new pin in flush
• If the gearcase is open, clean and re-grease per service guidance
• Run at low speed first to verify smooth operation before full use

The Washer is an OEM replacement part for Kitchenaid stand mixers. This washer serves a dual purpose as both a spacer and a cushion, positioned on the Vertical Center Shaft beneath the Bevel Pinion and Center Gear and above the planetary gear assembly.

Replacement of this washer should be considered if it becomes torn, damaged, or lost to maintain the mixer's performance and prevent potential damage to other components. It is recommended that two washers be used in every mixer to ensure optimal performance and stability of the internal gearing system.

Symptoms of a washer needing replacement include:

• Increased operational noise or grinding sounds
• Excessive vibration or instability during use
• Visible wear or damage to the washer itself

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Groove Pin is an OEM replacment part for Whirlpool stand mixers. Located internally on the planetary beater hub, this cylindrical pin engages a circumferential groove to deliver precise beater movements at varying speeds.

Causes relate to wear from continuous rotating motions, cracking under heavy load pressures, or loosening over extended use. Mineral buildup may also impede smooth functioning.

Symptoms of a problematic groove pin include:

• Whirring noises and vibrations heard during kneading or mixing
• Uneven blending of ingredients around the mixing bowl
• Potential damage to other internal components from pin mobility

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The  Front Sleeve Bearing is an OEM part for Whirlpool stand mixers. It serves as the front worm gear bearing. It is designed to support the rotating shaft within the mixer, ensuring smooth and efficient operation of the mixing attachments.

Over time, the front sleeve bearing can wear out or become damaged due to heavy use, lack of lubrication, or exposure to moisture. When this occurs, the bearing may fail to provide adequate support, leading to potential damage to the mixer's internal components.

Symptoms of a bad front sleeve bearing include:

• Unusual noises such as grinding or squeaking during operation
• Increased vibration or wobbling of the mixing attachments
• Difficulty in achieving smooth and consistent mixing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For the rear sleeve bearing, order WPW10170081.

This genuine replacement gear is a drivetrain component that transfers motor rotation to a mating mechanism inside your appliance. Replacing a worn or stripped gear restores smooth, reliable motion and helps prevent damage to adjacent parts.

• Meshes with adjacent gear(s) or a shaft to drive an internal mechanism
• Worn or rounded teeth can cause slipping, skipping, or no movement
• Intermittent or stalled movement can indicate a stripped or damaged gear

• Disconnect power (and shut off water/gas if applicable) before servicing
• Access the assembly; note orientation and timing marks
• Transfer any spacers, keys, or retaining clips from the old gear
• Seat the new gear fully and verify smooth manual rotation before restoring power

This replacement planetary assembly restores proper drive alignment and support for rotating components in select laundry appliances, helping reduce noise and vibration while returning smooth drum rotation. What it does:

• Transmits rotational force between the drive system and rotating drum components
• Supports alignment of the rotating assembly to prevent wobble or irregular movement
• Helps eliminate grinding, clunking or unusual noises caused by worn planetary components
• Resolve intermittent or complete loss of rotation when the planetary is worn or damaged

• Disconnect power and follow lock-out/tag-out before starting any repair
• Basic hand tools are typically required; refer to the appliance service manual for exact procedure
• Inspect adjacent parts (gears, bearings, seals) and replace if damaged

This planetary gear assembly drives the washer's agitator/spin mechanism to transfer motor motion into drum movement, restoring smooth agitation and spin action. Designed to fit as the washer's internal gearing component for reliable operation. What it does:

• Converts motor rotation into the agitator/drum motion for effective washing and spinning
• Replaces worn or damaged gears that can cause noisy operation or grinding sounds
• Helps correct slow, intermittent, or no-agitation and no-spin symptoms when gearbox failure is present
• Works as the internal gearset that mates with the transmission/agitator components

• One planetary gear assembly

• Disconnect power and water before beginning any repair
• Requires partial disassembly of the washer cabinet and access to the transmission/agitator area
• Inspect related parts (agitator, drive coupling, transmission) for wear and replace as needed

This planetary gear assembly transfers motor motion to the appliance's drive mechanism, restoring smooth rotation and normal operation. It replaces a worn or damaged planetary component to reduce noise and restore consistent drive performance. What it does:

• Transfers motor torque through the gear train to the driven component for proper operation
• Replaces worn or damaged gears that can cause grinding, clunking, or loss of drive
• Helps stop intermittent or failed agitation/spin caused by stripped or broken gear teeth
• Restores correct gear engagement to reduce excessive noise during operation

• One planetary gear assembly

• Disconnect power and water before starting any repair
• Some disassembly of the gearcase or transmission may be required; follow the OEM service manual
• Inspect surrounding seals, bearings, and fasteners; replace any damaged components
• Use proper tools and torque values

Color: White

Note: Shaft has been revised by the factory and the spring is no longer used.

Note: Shaft has been revised by the factory and the spring is no longer used.

Small but critical: this retaining pin secures the drive components in the planetary so your stand mixer transmits power reliably to the beater and attachments, helping restore steady mixing when the original pin is missing or worn.

What it does

• Locks the gear/shaft connection inside the planetary for positive drive
• Helps address symptoms like beater not turning, intermittent drive, or a loose/descending planetary
• Works in conjunction with the worm-follower and bevel/pinion gears
• Useful when the original pin is damaged during service or shears under load

What’s included
One retaining (dowel) pin, sold individually.

Install notes

• Unplug the mixer; lay it on its side and support the planetary
• Drive the old pin out with a small punch; align and tap the new pin in flush
• If the gearcase is open, clean and re-grease per service guidance
• Run at low speed first to verify smooth operation before full use

This planetary drip ring fits around a stand mixer's planetary assembly to cover the gap below the gearcase and help catch grease residue, restoring a clean, finished look where the beater hub meets the mixer head.

• Mounts at the base of the mixer head around the planetary housing
• Helps deflect incidental gearbox grease residue away from the bowl area
• Covers the seam between housing and planetary for a clean, finished appearance
• Replace if bent, cracked, loose, missing, or if you notice grease spotting beneath the planetary

• Unplug the mixer and remove the bowl and attachments
• Gently pry off the old ring; clean the seating surface of debris or residue
• Align and press the new ring evenly until fully seated; avoid deforming the ring or striking the gearcase
• On some models, access may require lowering/removing the planetary

This small drive gear transfers motor power to the rest of the gear train. Replacing a worn or stripped pinion restores smooth, consistent rotation and helps prevent additional damage to neighboring gears and shafts. What it does:

• Engages the mating gear to transmit torque from the motor
• Drives the output gear train for consistent movement
• Maintains proper gear mesh inside the drive housing
• Typical failure signs: grinding/clicking, slipping under load, or no movement of driven parts

• 1 pinion gear

• Disconnect power before servicing; allow all moving parts to stop
• Access the gearcase/drive housing and note the original gear's orientation
• Inspect mating gears; replace as needed and use manufacturer-approved grease if required
• Hand-rotate the assembly to verify smooth operation before reassembly and test

This machine screw features a 10-24 thread and is used to fasten brackets, panels, and internal components where this part number is specified. Replace missing or stripped hardware to restore a secure fit and help reduce vibration and noise.

• Fastens appliance components using a 10-24 machine thread
• Replaces worn, rusted, or lost screws during repairs
• Helps resolve symptoms like loose panels, rattling, or parts shifting
• Maintains proper alignment of assemblies after service

• Disconnect power; shut off gas/water before servicing
• Access the area per your model's service manual
• Start threads by hand to avoid cross-threading; then tighten with the appropriate driver
• Do not overtighten; replace any damaged mating clips or nuts

The Center Shaft O-Ring is an OEM part for Whirlpool mixers. This small but crucial component provides a watertight seal around the center shaft, preventing liquids and ingredients from leaking out of the mixer during operation. It helps ensure the smooth and efficient performance of the mixer by maintaining a proper seal.

Over time, the center shaft O-ring can become worn, cracked, or damaged due to regular use, exposure to various mixing ingredients, and the constant motion of the mixer. When the O-ring is compromised, it can lead to leaks and reduced mixing efficiency.

Symptoms of a bad center shaft O-ring include:

• Leaking of liquids or ingredients from the mixer
• Reduced mixing efficiency or performance
• Visible wear, cracks, or damage to the O-ring
• Difficulty in achieving a proper seal during use

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This factory replacement screw fastens appliance components securely. Use it to replace lost, stripped, or corroded hardware and restore a snug, rattle-free fit and proper alignment of panels and assemblies.

• Secures panels, brackets, and internal components to their mounting points
• Replaces missing or damaged fasteners to maintain correct alignment
• Helps eliminate vibration and rattling caused by loose hardware
• Restores the original fit with OEM-matched threads and dimensions

• Disconnect power and shut off water or gas supplies before servicing
• Use the correct driver bit that matches the screw head to avoid stripping
• Replace one fastener at a time to keep parts aligned
• Tighten snugly; do not overtighten to prevent stripped threads or cracked plastic

This replacement cover protects and secures internal components and wiring, restoring a finished appearance and helping prevent debris intrusion. It's a like-for-like exterior housing piece used on compatible Whirlpool appliances. What it does

• Covers and protects internal electronics, terminals, and wiring from dust and accidental contact
• Restores the appliance's finished exterior where the original cover was missing or damaged
• Helps maintain proper airflow paths and component positioning when installed correctly
• Can reduce vibration-related noise by keeping parts secured and enclosed

• One cover

• Disconnect power (unplug or switch off circuit breaker) before starting any repair
• Removal/installation usually requires removing a few screws and lifting the old cover off; keep fasteners for reassembly
• Handle edges carefully; use gloves to avoid cuts and protect painted surfaces

A replacement trim panel that restores the appliance's exterior finish and protects internal components from dust and debris. Helps maintain a clean look and keeps internal parts shielded after repair. What it does

• Acts as the exterior trim/cover over the appliance opening, preventing debris and lint from entering internal areas
• Protects switches, controls and internal wiring from accidental contact and damage
• Restores proper fit and finish when the original cover is cracked, warped or missing
• Stops rattling or gaps caused by a broken or loose cover

• Only install with power disconnected to avoid electrical shock
• Requires removal of adjacent panels or fasteners for access; use appropriate hand tools
• Handle carefully to avoid scratching the finish; align tabs and fasteners before tightening
• If fasteners or clips are damaged, replace them to ensure secure fit

Color: Onyx black

This cover is a replacement access panel that protects internal components and restores the appliance's exterior appearance. It keeps wiring and controls shielded while maintaining a clean, finished look. What it does:

• Shields control components and wiring from dust, spills, and accidental contact
• Restores damaged or missing exterior panels for a finished appearance
• Helps maintain proper airflow and component clearance by covering openings
• Can reduce rattles or vibration by replacing a loose or broken panel

• One replacement cover

• Disconnect power (and gas or water if applicable) before starting any repair
• Basic hand tools are typically required; follow the appliance's service manual for specific steps
• Handle edges carefully; align tabs/fasteners before securing to avoid damage
• Replace worn fasteners or clips to ensure a secure fit

This cobalt blue replacement cover restores the appliance's exterior look and protects internal components from dirt and wear. It fits where the original colored trim or panel cover has become cracked, faded, or missing. What it does:

• Replaces a damaged or worn cobalt blue cover to renew appearance and finish
• Shields underlying components from dust and debris
• Helps prevent small items from entering openings behind the cover
• Commonly used when the original cover is cracked, chipped, faded, or broken

• Disconnect power to the appliance before beginning any work to avoid shock or injury.
• Installation typically requires only basic hand tools; follow the appliance's service instructions.
• Handle edges carefully — clips or tabs can be sharp or brittle on older parts.
• Only install a part that matches the appliance's original location and attachment points; do not force or modify the part.

Color: White

This 6-32 machine screw fastens brackets, panels, and internal components in your appliance. Replacing a missing or stripped screw restores a secure, rattle-free fit and keeps assemblies properly aligned during normal operation.

• Secures components to frames, brackets, or covers
• Helps maintain proper alignment of panels and hardware
• Replaces missing, damaged, or stripped fasteners
• Common signs: loose/rattling panels, misaligned parts, or a screw that won't tighten

• Disconnect power (and water, if applicable) before servicing
• Match thread and length to the original fastener; reuse any washers if present
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the driver that matches the head style on your original screw

• Thread size: 6-32 (machine screw)

This pin guard is a small replacement guard that protects and secures a hinge or pivot pin on compatible Whirlpool appliances, helping the door or drawer operate smoothly and stay aligned. It prevents metal-on-metal wear and keeps the pin seated. What it does:

• Covers and protects a hinge/pivot pin from wear and damage
• Keeps a hinge pin seated to reduce door/drawer wobble or misalignment
• Helps minimize noise from a loose or rubbing hinge
• Commonly replaced when a guard is cracked, broken, or missing

• One pin guard

• High-level replacement—usually snaps or slides onto the hinge/pin; no special tools typically required
• Disconnect power (and water if applicable) before working near electrical or water connections
• Inspect the hinge pin and surrounding parts; replace damaged pins or fasteners as needed for a secure fit

The Worm Gear and Bracket Assembly is an OEM part for Whirlpool appliances, specifically designed for use in certain models of stand mixers. This assembly is responsible for transferring the motor's power to the mixing attachments, ensuring smooth and efficient operation. The worm gear works in conjunction with other gears to reduce the motor's speed while increasing torque, allowing the mixer to handle heavy doughs and batters.

You should replace the worm gear and bracket assembly if it becomes faulty. Causes of a bad worm gear and bracket assembly can include wear and tear from regular use, overloading the mixer with heavy ingredients, or lack of proper maintenance. A malfunctioning worm gear can lead to issues with the mixer's performance and efficiency.

Symptoms of a bad worm gear and bracket assembly include:

• The mixer attachments not turning or moving irregularly
• Unusual noises such as grinding or clicking during operation
• The mixer motor running but the attachments not moving
•  Reduced power or inconsistent mixing performance

This OEM part ensures your stand mixer operates at peak performance, handling all your mixing needs with ease. The assembly is also compatible with some models from KitchenAid, Jenn-Air, and other brands under the Whirlpool umbrella.

Notes: 10 and 23 teeth. For worm gear only order WPW10112253. For grease order 4176597.

The Center Shaft Kit is an OEM part for Whirlpool stand mixers. This kit includes the center shaft and necessary components to ensure the proper operation and rotation of the mixer's beaters or attachments.

Causes of a bad center shaft can include wear and tear from regular use, corrosion due to exposure to ingredients and cleaning agents, or physical damage from overloading or mishandling the mixer.

Symptoms of a bad center shaft kit include:

• The beaters or attachments not rotating properly
• Unusual noises during operation
• The mixer shaking or vibrating excessively
• Difficulty in attaching or removing beaters or attachments

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is a genuine screw used to secure appliance components that require a 10-24 fastener. It provides a reliable hold for panels, brackets, and assemblies where a coarse 10-24 thread is specified. What it does

• Fastens panels, brackets, and small assemblies that use 10-24 threaded holes
• Replaces worn, stripped, or missing screws to restore secure mounting
• Helps stop vibration-related noise and movement when proper fastening is restored
• Used in locations where a standard 10-24 coarse-thread screw is required

• Use the correct driver size and turn slowly to avoid stripping the head or threads
• Do not overtighten; stop when the part is snug and secure to avoid cracking plastic or deforming metal
• If reinstalling into worn or damaged threads, consider using a repair insert or alternate mounting method
• Disconnect power and follow appliance safety guidance before accessing internal components

The Retaining Clip is an OEM part for Whirlpool stand mixers. This small but essential part ensures the stability and secure fitting of various mixer components, contributing significantly to the appliance's overall performance and durability. Its primary role is to hold parts in place, preventing movement that could lead to wear or malfunction during operation.

Stand mixers are subjected to a variety of stresses, particularly when mixing thick doughs or other dense mixtures. The retaining clip's integrity is vital in these situations, as it helps to maintain the correct alignment and functioning of the mixer's moving parts. 

Symptoms of a bad Retaining Clip in a stand mixer include:

• Components such as beaters or attachments becoming loose or detaching during use.
• Unusual vibration or noise 
• Difficulty in attaching or detaching mixer attachments  

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This refrigerator water filter replaces your fridge's internal filtration cartridge to help restore clear, better-tasting drinking water and ice. Simple to swap, it helps maintain household water quality when performance declines. What it does:

• Traps sediment and particulates to improve water clarity
• Reduces chlorine taste and odor for fresher-tasting water and ice
• Helps prevent scale and particulates from reaching dispenser and ice maker
• Common symptoms: cloudy or bad-tasting water, off-odors, or reduced water flow from dispenser

• Turn off the water supply and follow the refrigerator manufacturer's removal instructions before replacing the filter.
• Push/turn or slide new filter into the filter housing until it seats; follow OEM instructions for your model.
• After installation, flush several quarts of water through the dispenser to clear air and any loose carbon residue.
• Replace at recommended intervals and discard used filters per local regulations; do not use with water that is microbiologically unsafe without adequate disinfection.