Parts for Poulan 262: Chassis / Bar / Handle Parts

Tapping screw for outdoor power equipment engines. Replaces missing, stripped, or damaged mounting screws. Consult your parts diagram for location.

Fix fuel leaks and engine starting problems with this fuel line fitting. Connects separated fuel line sections on trimmers, blowers, and chainsaws.

Replacement fuel cap assembly for gas chainsaws. Installs on fuel tank opening. Replace if cap is cracked, threads are stripped, or seal is worn and leaking.

This part is a wire throttle that is used on chainsaws. A wire throttle is a component that adjusts the choke on gas-powered engines. This wire throttle is manufactured out of a high-quality and durable metal material.A new wire throttle will be needed if the original is cracked, broken, or damaged in any way. The wire throttle could become worn out after regular use over a period of time due to normal wear and tear on the machine. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This wire throttle is a genuine Husqvarna part. It is sold individually. This particular wire throttle is compatible with chainsaws that are manufactured by the Husqvarna brand and the Poulan brand.

This is a clip that is used as a fastener in several types of lawn and garden equipment. Unlike nuts and screws with threads, the clip has prongs that attach to the threads of screws and bolts to offer better stability. When the clip is tightened, it acts as a locking mechanism to keep other parts in place. This allows the use of a nut without utilizing a lock washer. These clips can become damaged, brittle, or even break and will need to be replaced. Take a screwdriver and pull up the pins on the clip, which will result in feeling less tension around the component. At this point, the clip can be removed and a new one can be placed in the same position. Press the clip onto the nut or screw and push the pins into place. The rest of the machine can be reassembled and used as normal.This clip is a genuine OEM replacement part that is sourced directly from the manufacturer. The component is sold individually. It is compatible with string trimmers, chainsaws, and edgers manufactured by Poulan, Poulan Pro, Craftsman, Husqvarna, and Weed Eater.

Chain won't spin or engages poorly? This chainsaw clutch assembly uses centrifugal force to engage the chain. Durable metal construction, sold as complete unit.

Fix clutch slipping or poor engagement with this friction washer. Creates proper clutch fit for consistent power transfer in chainsaws and trimmers.

Chain won't rotate or stops spinning? The clutch drum assembly engages the sprocket that drives your chainsaw chain. Durable metal construction.

This is a dust cover that fits over the chainsaw's internal components to protect them from sawdust and debris. It helps keep the engine and clutch area clean during operation, extending the life of moving parts. Replace this cover if it is cracked, broken, or missing, which can allow debris to clog or damage internal mechanisms.

Flywheel washer for chainsaws, trimmers, and blowers. Replace if worn, corroded, or during flywheel maintenance to ensure proper spacing and function.

Replacement screw for chainsaw assembly. Secures components and housings. Order a new screw if yours is stripped, missing, or damaged during maintenance.

Chainsaw won't pull start or recoil cord is stuck? This starter housing protects the recoil mechanism. Moderate DIY repair in 30-45 minutes.

This is a replacement screw that is sourced from the manufacturer. The screw can be used for a range of applications on many types of lawn and garden equipment. One of the most common uses of this type of screw is to affix the housings, such as the starter cover, to the machine. Owners should refer to their equipment diagrams to ensure they are using the screws in the proper locations on their equipment. The screws could need to be replaced for any number of reasons. In some cases, they might become damaged or corroded and will need to have a replacement. Other times, the screws could become lost. When removing the housing from the equipment, the owner might misplace some of the screws and they will need to be replaced. Replacing the screws is simple and will only require a screwdriver. This is a genuine OEM screw that is sold individually. The screws can be used with more than 150 various models of chainsaws, string trimmers, and leaf blowers. Compatible brands include Poulan Weed Eater, Husqvarna, Jonsered, Poulan, and Poulan Pro.

Fix a broken or missing pull start handle that prevents engine starting. This chainsaw starter handle works with the recoil assembly for reliable starts.

Engine won't start or rope pulls out completely? This starter rope kit wraps around the recoil pulley to engage the engine. Simple DIY fix, 3 feet long.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

Replacement mounting screw for brush cutters, chainsaws, trimmers, and blowers. Replaces lost, stripped, or broken screws during repairs or maintenance.

The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.

Metal bolt that secures the bar to the chainsaw housing. Replace if corroded, stripped, damaged, or missing. Durable metal construction for reliable attachment.

If your chainsaw chain is coming loose or breaking off the guide bar, replace the chain catcher. This safety part prevents the chain from flying off.

This is a metal bracket assembly that mounts to the chainsaw body and supports the guide bar in position. It helps secure the bar and chain assembly for stable cutting operation. Replace this bracket if it is bent, cracked, or if the guide bar feels loose or unstable during use.

Chain brake won't engage or is damaged? Replace this safety assembly that stops the chain instantly. Protects against kickback injuries and loose chains.

Secures the guide bar to your chainsaw. Replace if stripped, corroded, or threads are damaged. Confirm fit with your model number before ordering.

Replace a missing, stripped, or damaged bolt on your chainsaw. This fastener secures key components during operation. Essential for reassembly.

Mounting screw for lawn equipment including blowers, trimmers, and hedge trimmers. Replaces broken, stripped, or missing screws that secure components.

Chain overheating or not staying oiled? This oil pump kit delivers consistent lubrication to prevent chain damage and ensure safe operation. DIY fix.

Chainsaw not oiling chain or bar? This worm gear spring engages the oil pump gear on the crankshaft. Simple fix when oil isn't transferring properly.

This oil pickup elbow is a genuine Husqvarna part, sold individually. This oil pickup elbow can be used as a replacement part for chainsaws. The function of the oil pickup elbow for a chainsaw is to fasten around the fuel line and prevent the fuel line from being yanked from the fuel tank by force during inspections or while operating the chainsaw. An oil pickup elbow might have to be replaced if it no longer effectively keeps the fuel line in place and attached to the fuel tank. If the chainsaw user can pull the fuel line out of the machinery, the oil pickup elbow needs to be replaced with this genuine OEM replacement part. This could be as a result of damage to the oil pickup elbow in the form of general wear and tear or loosening over time. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This oil pickup elbow is compatible with the following brands: Husqvarna, Craftsman, and Poulan.

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

Fix chainsaw bar oil starvation with this oil pickup assembly. Draws oil from tank through mesh strainer to pump. Direct replacement component.

This is a small filter screen that sits in the oil supply line of a chainsaw, filtering debris from the bar and chain oil before it reaches the oiler mechanism. It ensures clean oil flows to the bar and chain for proper lubrication. Replace this filter if the chain is not receiving adequate oil, the bar is overheating, or the filter screen is visibly clogged or damaged.