Need Help?
Call or text
Show parts
This knob choke can be used to replace broken or deteriorating knob chokes to help keep chainsaws and saws running efficiently. Knob chokes are essential for ensuring that fuel-air mixtures remain enriched by reducing the flow of air within the engine. Knob chokes experience significant wear and tear throughout their lifetime, which is why regular replacement is essential to ensure that power equipment doesn't deteriorate. While replacing a knob choke, refer to the instructions provided by specific equipment manufacturers to ensure correct application. This part is made of high-quality durable plastic to guarantee a longer lifespan.This knob choke is a genuine OEM Husqvarna replacement part that has been sourced directly from the manufacturer. This replacement knob choke fits various different models of Poulan and Husqvarna chainsaws and saws. Please note this knob choke is sold individually.
Usually ships within 4 - 14 days
This part is a replacement spring ignition switch. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or faulty spring ignition switch in a variety of gas chainsaw models.This part is essential for applying tension to the throttle control lever. If the spring ignition switch is malfunctioning, the chainsaw will not work properly, and the user will not have sufficient control over the throttle. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any work. Proper tools are required to replace this part. For more accurate information on how and where to install this spring ignition switch, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this spring ignition switch is suitable for use on several different models of gas chain saws manufactured by Husqvarna, Poulan, and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.
This part is a lever ignition switch, often called an ignition lever. The lever ignition switch is used on chainsaws. This part is a switch starts and stops the chainsaw. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.A new lever ignition switch may be needed if the engine will not start, if the engine suddenly dies, if the chainsaw only runs intermittently, or if the kill-switch is not engaging. A Phillips screwdriver, Torx driver, flat-head screwdriver, and ratchet/socket set will be needed to perform this replacement.This lever ignition switch is a genuine Husqvarna part. It is sold individually. This particular lever ignition switch is compatible with gas chain saws that are manufactured by Husqvarna, Poulan, and Jonsered.
This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is intended to replace missing or broken screws in a number of different small outdoor power equipment models.With regular usage, screws can easily become stripped, rusted, or lost. This can lead to improper functionality of outdoor power equipment. It's important to use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit that will keep equipment in good working order. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable material. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation and usage guidance, it is recommended to refer to the equipment manufacturer diagram.This replacement screw is designed to fit various models of Husqvarna, Craftsman, Poulan, and Weed Eater trimmers and hedge trimmers, blowers, and chainsaws. Please note this screw is a genuine OEM part and is sold individually.
The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.
Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.
Symptoms of a bad Fuel Line include:
This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
A fuel line fitting connects two separate sections of the fuel line. Over time and continued use, even durable fuel lines can become cracked, split, or broken, leading to leaks and the need for repair. If you have a fuel line that is separated or severely damaged, a fuel line fitting can be used to make a simple repair that can save you time and money. Depending on where in the equipment the damaged fuel line is, the repair steps can vary. Several fuel line fittings may be needed depending on the severity of the equipment’s damage. This repair will require a nut driver, forceps, a pair of pliers, screwdrivers, and a socket set to complete. This plastic fuel line fitting is compatible with numerous small engines for lawn and garden maintenance like leaf blowers, hedge trimmers, or chainsaws that are manufactured by many brands, like Husqvarna, Jonsered, Poulan, and Weed Eater. This fuel line fitting is a genuine OEM part.
This clutch washer kid includes a clutch, a washer, and a clip. A washer helps to protect the engine from unwanted pressure at the joint where two parts connect. Washers help to spread the pressure evenly so that the fastener doesn’t move, which would cause corrosion and friction. Washers can wear down or corrode over time, leading to unwanted pressure in the chainsaw’s engine. Based on the location of this washer, replacing it may require different steps to take apart the engine. Be sure that the engine has cooled completely before attempting any repairs. This part is compatible with Poulan and Craftsman chainsaws and is a genuine OEM part sourced directly from the manufacturer.
A chainsaw clutch drum works by driving the chain along with the gear. The gear and clutch drum are engaged by the clutch when the engine’s speed picks up. The chainsaw clutch drum likely needs replacement when the chain isn’t turning. This repair is easy to complete and can be accomplished with minimal tools. The hardest part of this repair might be the removal of the old chainsaw clutch drum in cases where they are misshaped or warped from damage from continual friction. Many will work well past the point when they should be replaced, so it is essential to monitor your chainsaw parts for noticeable signs of disrepair or inefficiency. This chainsaw clutch drum is compatible with Craftsman and Poulan chainsaws. It is a high-quality genuine OEM clutch consisting of durable metal.
The clutch connects to the crankshaft of the chainsaw engine. The crankshaft turns the up and down motion of the pistols into a rotation, which turns the drum and makes the chain go around. As the inner drum of the clutch starts to wear out, it puts more and more pressure on the springs, causing them to break. So, without a properly functioning clutch, the engine will run, but the blade will not turn. Replace the chainsaw clutch assembly using our genuine OEM part sourced directly from the manufacturer. A socket wrench and a screwdriver will be needed. Start by removing the chain brake cover to gain access to the clutch. Remove the chain and bar and then bind the piston in place. From there, use a screwdriver to remove and replace the clutch. This part is compatible with Poulan or Craftsman brand products. Sold individually.
This large clutch washer is a genuine Husqvarna part, sold individually. This large clutch washer can be used as a replacement part for a chainsaw. The purpose of a large clutch washer for a chainsaw is to space out several components of the appliance so its fasteners do not create friction and cause damage within the internal parts of the chainsaw.The large clutch washer might have to be replaced at some point within the standard lifespan of a chainsaw. Washers are small parts that can be easily lost or misplaced, and if it is found that a washer has disappeared, it should be replaced immediately. If the washer is stripped to the point that it cannot serve as a fastening component, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This large clutch washer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.
This chainsaw fuel cap assembly is made from high-quality plastic. Durable threads keep this chainsaw fuel cap assembly working for years of use. You place one end in the fuel tank while the screw cap covers the nozzle. This keeps your gas from spilling out and causing possible damage or injury. You can’t cut down a tree or slice up some firewood with gas leaking everywhere. This also leads to harming the environment around you. Chainsaws fuel caps can swell. The rubber seals may leak after a certain amount of use. The cord attaching the cap to the insert may break, allowing the cap to be lost. Replacing the chainsaw fuel cap assembly can correct these problems. Pliers or a wrench may be needed to remove the old fuel cap assembly. This genuine OEM chainsaw fuel cap assembly was manufactured for use with Craftsman chainsaws. It is also compatible with Poulan and Poulan Pro chainsaws.
This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.
This is a clip that is used as a fastener in several types of lawn and garden equipment. Unlike nuts and screws with threads, the clip has prongs that attach to the threads of screws and bolts to offer better stability. When the clip is tightened, it acts as a locking mechanism to keep other parts in place. This allows the use of a nut without utilizing a lock washer. These clips can become damaged, brittle, or even break and will need to be replaced. Take a screwdriver and pull up the pins on the clip, which will result in feeling less tension around the component. At this point, the clip can be removed and a new one can be placed in the same position. Press the clip onto the nut or screw and push the pins into place. The rest of the machine can be reassembled and used as normal.This clip is a genuine OEM replacement part that is sourced directly from the manufacturer. The component is sold individually. It is compatible with string trimmers, chainsaws, and edgers manufactured by Poulan, Poulan Pro, Craftsman, Husqvarna, and Weed Eater.
This is an OEM replacement starter pulley kit designed for use with gas chainsaws. The starter pulley assembly replaces the components of your recoil starter that may fail due to normal wear and tear. The pulley and return spring react to the pull of the starter rope and then engage the flywheel. This is what fires the chainsaw engine. If the starter rope is not reacting or the flywheel is not engaging, there may be an issue with the starter pulley assembly. This repair can be completed with a screwdriver and pliers and doesn’t take a lot of time. This starter pulley kit is a genuine product from Husqvarna, and it is designed for use with Poulan, Jonsered, and Husqvarna engines and outdoor power equipment. This kit includes the plastic pulley, return spring, hub, and two screws for securing the unit. The housing, rope, and starter grip will be sold separately if replacements are needed.
This starter hub is a genuine Husqvarna part, sold individually. This starter hub can be used as a replacement part for chainsaws. The starter hub for a chainsaw is a component of the recoil starter mechanism; the starter rope is coiled around a pulley that is held in place by the tension of a spring, and that spring is attached to the starter hub. The function of the starter hub is to rotate the pawls of the flywheel such that the engine is activated.A starter hub might have to be replaced in the event that it suffers damage that impedes it from connecting to or facilitating the operation of the pawls of the flywheel. If the starter rope does not turn on the engine when pulled, this could be a sign of damage in the starter hub. The starter hub can suffer damage from general wear and tear or overuse, and if this is the case, it should be removed and replaced with this genuine OEM part before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter hub is compatible with the following brands: Husqvarna, Craftsman, and Poulan.
The recoil spring is a vital part of the starter mechanism in chainsaws. It will apply tension on the pulley, which allows it to retract the rope. Without a working spring, it will be difficult or even impossible to start the chainsaw. While the metal springs are durable, they could start to wear out over time and will no longer be effective. In addition, the springs could suffer damage or could become corroded. They could also be lost when making other repairs to the chainsaw. If there is any issue with the spring, it will require a replacement. This authentic OEM replacement recoil spring is sold individually. The chainsaw recoil spring is compatible with several brands including Poulan, Poulan Pro, Husqvarna, Jonsered, Craftsman.
The starter spring is what is used to create the recoil to start the engine on pull-start chainsaws, blowers, trimmers, and other lawn equipment. When the starter handle is pulled, the rope extends and pulls on the spring, causing it to tighten and then release, which creates the action to fire the motor. It may also be called the recoil spring, rewind spring, or return spring, but they all refer to the starter spring. Over time, this can become worn with use, and in some situations, it can even break completely. If the starter rope will not rewind into the housing, the spring may be twisted and need to be replaced. If so, this genuine OEM starter spring will do the job for compatible machines. This model is manufactured by Husqvarna and compatible with various Poulan and Husqvarna lawn equipment. This spring may serve as a replacement for many machines including blowers, hedge trimmers, grass trimmers, chain saws, and saws. Check the user manual for compatibility and fit, as well as part numbers. Be sure to install this according to all instructions and diagrams for safe and proper operation.
Known as a starter rope, this part is used to start the engine of the tool and wraps around the recoil pulley. The pulley and return spring spin to begin the firing of the spark plug for the engine to run. The rope can malfunction and create problems or even prevent the engine from starting. The most common cause for replacement is when the rope splits or starts to fray and doesn’t operate as usual. A tangled kit rope can also make the rope hard to pull to start up the engine before doing yard work. Users who experience excess rope or a knot on their kit rope when starting the engine may need to look into replacement. This Husqvarna Kit Rope is a component that attaches to chainsaws, hedge trimmers, string trimmers, and leaf blowers. This is a genuine OEM product directly from the manufacturers and is sold individually. It can be used with many models from Husqvarna, RedMax, Craftsman, McCulloch, Poulan, Weed Eater, Paramount, and Homelite. Installation requires only a pair of pliers, a screwdriver, and a Torx screwdriver. Other products that may be needed include a pulley and starter spring.
This screw is designed to be used in many different chainsaws to connect and hold together various components. The screw can be used on its own or placed with a nut in a pre-drilled and threaded hole. If a nut is going to be used, it is best to choose one with the same threading and finish as the screw that will be used. A screw can become damaged in many ways that will require a replacement. Corrosion, excessive stress, or high temperatures may weaken the screw. In some cases, the damage can cause it to break or become loose and no longer properly secure other components of the chainsaw. A visual inspection can help determine if corrosion is present or the screw is damaged or broken. If the screw is stripped, a bolt remover may be needed to remove it to make the replacement.This screw is a genuine OEM replacement part provided directly from the manufacturer. It is sold as an individual component. The screw is compatible with chainsaws created by Poulan, Poulan Pro, Craftsman, and Husqvarna. A screwdriver is needed to replace, remove, or install the replacement part.
This replacement part is an oil vent assembly. This is a genuine replacement part made by Husqvarna. This part works directly with the oil vent to ensure the proper settings and operation of the engine and machine as a whole. A new oil vent assembly might be needed if the current one is missing or damaged in any way. If the vent has been obstructed or is too dirty to clean it might be time to replace this part. Work gloves are recommended when repairing or replacing this part as the oil can stain hands and be hard to clean. It is also recommended that the engine be powered off before attempting to replace this part. This oil vent assembly is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.
The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.
This handguard is made to be used on several models of chainsaws by major lawn and garden manufacturers. The purpose of the handguard is to engage the chain brake if it is pushed forward. A secondary function of the handguard is to protect the user's hands from an injury that could be caused by the bar and chain on the chainsaw. The part is made of durable plastic but can become damaged over time, through use, or impact.A visual inspection will show if the handguard has become cracked, fallen off, or is broken in other ways. If this occurs, the handguard will need to be replaced before using the chainsaw. The replacement should be done while using work gloves. Place the chainsaw on a flat surface and remove the spark plug wire first. A socket set and a screwdriver can be used to remove the old handguard. Install the new one and reassemble other parts before use.This is a genuine OEM replacement part directly sourced from the manufacturer. It's sold as an individual part. The component is designed for use with chainsaws manufactured by Poulan, Poulan Pro, and Craftsman.
This part is a handguard spring for a chainsaw. The handguard spring returns the handguard to the forward position when the handguard is released.A new handguard spring may be needed if the handguard no longer returns to the forward position when the handguard is released. If the spring is broken in any way, it will no longer work properly and will need to be replaced. The spring could become damaged or break after normal use due to normal wear and tear over time. If this is the case, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This handguard spring is a genuine Husqvarna part. It is sold individually. This particular handguard spring is compatible with chainsaws that are manufactured by the Husqvarna brand and the Craftsman brand.
This chain brake is made to connect above the drum of a chainsaw. It has a metal band that goes around the drum and a handguard that also connects to the brake. When the guard is pressed forward, the brake band tightens on the clutch drum, making the chain stop immediately. The brake is pre-assembled and consists of both metal and plastic parts. The spring, brake band, and linkage are all metal, and the housing is plastic. A common chain brake problem is the brake band becoming worn out or damaged. This causes the brake to no longer stop the chain fast enough or at all. This can be incredibly dangerous, so it’s important to check the brake regularly. Installing a new chain brake is straightforward with this genuine OEM part sourced directly from the manufacturer. Just remove the clutch cover assembly, take off the old chain brake, and screw in the new kit. Be sure to wear gloves and let the engine cool completely before making repairs. Compatible with Craftsman, Poulan, and Poulan Pro chainsaws. Sold individually.
This is a bar bolt used with several types of lawn and garden equipment. It is used to secure the bar to the housing of the unit. The metal bolt is made with durable components but corrosion, damage, or wear and tear can necessitate replacement. The bar bolt can also become stripped or fall apart and create issues with other components staying together.If the bar bolt appears to be damaged, has been lost, or is broken, it needs to be replaced. The replacement process will require a wrench since the bolt is designed with a hex head. Before making the replacement, make sure the equipment has been turned off and placed on a stable surface. Wearing work gloves, remove the old bar bolt before placing the new replacement component.This is a genuine OEM replacement part that has been sourced directly from the manufacturer. It is sold as an individual bolt. The bar bolt is designed to be used with string trimmers, pole prunes, and chainsaws manufactured by Poulan, Poulan Pro, Husqvarna, and Craftsman.
This is an OEM replacement chainsaw bar plate for select brands and models of chainsaws. The chainsaw bar plate is responsible for holding the chainsaw guide bar in place and providing a secure foundation to reduce vibrations, while also spacing the bar from the chassis. The plate itself can become loose over time, or can even become damaged and lead to things like oil leaks from a loose chain. If the bar plate is in disrepair or not functioning correctly, it should be replaced immediately. this genuine replacement part can provide an exact fit for compatible saws. This OEM bar plate is manufactured by Poulan and will fit a number of chainsaws from the brand Craftsman, as well as those from Husqvarna and Jonsered. This durable part is made from high-quality metal and can be replaced with only a few tools. The plate is sold individually as a single unit. Hardware is not included and will have to be purchased separately if it is required. Always wear gloves and disconnect the spark plug before beginning repairs on chainsaws.
This nut is used to attach a mounting bar to a chainsaw or pole saw. The nut attaches in slightly different ways depending on the product, but it will feed a bolt that attaches the base of the bar to the pole or housing of the saw. If the nut becomes stripped or corroded due to exposure to the elements, it will need to be replaced. A socket wrench and a socket set are needed to install the part. simply screw it into the chain bar studs, making this a quick and easy replacement. The flat side of the nut should face outward to create a flush effect with the rest of the handle. The other side will fit into the bar. This part sold independently. It works with both Poulan and Husqvarna products and is a genuine OEM product sourced directly from the manufacturers.
This replacement part is a clutch assembly cover and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Clutch assembly covers are an important part to most lawn equipment. This specific part is intended to cover the parts of the clutch assembly that can be dangerous to the operator of the machine. A new clutch assembly cover might be needed if the current one is damaged or broken in any way including being cracked or dented. It is possible that the clutch assembly cover can become broken after years of normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.
Sometimes known as a chain tensioner, this kit is used to adjust the bar of a chainsaw, pruner, or pole saw to increase or decrease the amount of tension in the chain. Having an overly tense chain can cause friction with the bar, which could lead to an engine fire. A chain that is too loose has a chance of kicking back or even losing the chain mid-use, which would be incredibly dangerous. Chains naturally become looser over time, so be sure to regularly check the status of the chain. Having the right amount of tension is critical for the saw to work properly. Making adjustments is easy with our genuine OEM bar adjustment kit sourced straight from the manufacturer. Simply remove the clutch cover and find the adjustment assembly in the cover. Remove it and thread the new chain tensioner onto the assembly. Reassemble the clutch cover and be sure to line up all the corresponding parts. Compatible with Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is shipped individually and only a screwdriver is needed to make this repair.
This adjustable pin bar is used on chainsaws and other lawn and garden equipment to ensure a blade is adjusted to the appropriate rate of tension. When the chainsaw blade is properly adjusted, it will cut faster and better. The pin bar is made out of a durable metal but can become damaged over time. If the pin bar is not working correctly or has broken, it will need to be replaced.If a chainsaw or pole pruner is no longer performing as well as it used to, the adjustable pin bar may need to be replaced. To replace this pin, the cover of the chainsaw will need to be removed. Take the gear that has the screw and pin bar on it out of the machine. Next, remove the broken adjustable pin bar and replace it with a new part. Reassemble the tool for it to be ready to use.This adjustable pin bar is designed for use on Craftsman, Poulan, Poulan Pro, and Husqvarna chainsaws, pole pruners, and string trimmers. It is a genuine OEM replacement component that is directly sourced from the manufacturer. The part is sold individually.
This bar adjustment retainer is an integral part of the bar adjustment mechanism that assists with securing the screw in many kinds of lawn and garden equipment. The retainer is made of durable metal and is used to replace a faulty, broken, or damaged original part. Sometimes the bar adjustment retainer will break or become damaged and need to be replaced.If the retainer breaks, it can cause the bar adjustment screw to become damaged or stripped. Inspecting for damage requires taking apart the equipment. Use work gloves to remove the chain bar cover and get access to the retainer. Replace it with a new retainer and screw. The bar adjustment pin should be placed at the end of the screw. Thread the screw through until it catches on the retainer. Once that's complete, the other parts can be reassembled.This bar adjustment retainer is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The retainer is made to be used with string trimmers, edgers, hedge trimmers, pole pruners, and chainsaws created by Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is sold individually.
This is a genuine replacement front handle that can be used on certain models of chainsaws. The front handle, or front handle assembly as it is sometimes known, is designed to offer users a place to hold onto the saw in addition to the rear handle. The front handle assembly also helps with maneuvering the saw and ensuring that the exact cut is made. This is a durable plastic part, but since it is exposed to the elements and potential impact damage, it can become broken or damaged over time. This will require a replacement to ensure that owners can continue to maneuver the saw and operate it safely. This OEM front handle is manufactured by Poulan, a leader in chainsaws and components. The handle can be used with more than 50 of the available gas-powered chainsaw models from the brand. This plastic part is sold as an individual unit and hardware is not included with the purchase. A screwdriver will be required to make this replacement. Be sure to disengage the engine and allow the chainsaw to cool before performing any repairs. Owners should also be sure to wear gloves when performing equipment repairs, even if not working directly with engine components.
This part can be used to replace a deteriorating or leaking oil pick-up in chainsaws. An oil pick-up is essential for a smooth-running piece of equipment, as it supplies oil to the engine. Over time, oil pick-ups can become worn, which can cause leaks and prevent the engine from receiving the necessary supply of oil to operate properly. This part is manufactured from high-quality, durable plastic and non-corrosive metal. This assembly pick-up oil tank is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement assembly pick-up oil tank fits various different models of Husqvarna and Poulan chainsaws. Please note this part is sold individually.
Chainsaws generate a great deal of heat and friction, but the oil pump systems that keep the situation under control. They do this through the use of chainsaw bar oil poured into a reservoir. It remains in the reservoir until the throttle is engaged which then cues the pump to spray oil out of a port and smear it on the bar and chain to reduce friction and heat. The use of the oil pump is crucial, and this OEM oil pump assembly is a full replacement for times when a chainsaw is not getting adequate oil on the bar. It works with Poulan, Craftsman, Poulan Pro, and others. This project requires only wrench and screwdriver sets to perform the repair. It ships as an individual kit ready for full replacement of the original oil pump.
This worm gear spring is located on a chainsaw's engine crankshaft. It engages a gear in the oil pump, which causes the pump to transfer oil to the chain and bar on the equipment. If no oil is coming out of the chainsaw's oiler, this can be an indication that it needs to be replaced.Sometimes the worm gear spring can slip on the crankshaft, which will cause it to wear down. As time goes on, the problem can worsen until the worm gear no longer rotates at all. To replace the part, remove the clutch cover assembly, bar and chain assembly, and clutch drum. Take off the clutch assembly, front handle, and chain brake assembly. After the oil pump assembly is removed, the worm gear can be replaced.This worm gear spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The part is compatible with many chainsaws created by Craftsman, Poulan, Husqvarna, and Poulan.