Chipper Shredder Gasket & Seal

This replacement part is an external gasket kit, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This gasket kit is different from typical gasket kids as they are used on the external side of the engines. These gaskets are still very important to the engine as a whole and allow it to run smoothly during use.A new external gasket kit might be needed if the current one is broken or damaged. If there are noises coming from inside the machine it is possible that the parts of the gasket are out of place or could be malfunctioning. Be sure the engine of the appliance is completely powered down and cooled off before replacing the gasket kit as this area can be hot from use.Be sure to reference the specific user manual prior to beginning this repair. Note that this is a genuine OEM replacement part and is told individually. This part is sourced directly from the manufacturer.

This breather gasket easily replaces old, worn-out gaskets to ensure the utmost efficiency of relevant outdoor power equipment.A worn out or deteriorated breather gasket can cause a number of issues such as high-idling and oil leaks. As breather gaskets age, they will need to be replaced. Breathers need to function properly, as they are critical for relieving engine pressure and reducing buildup of harmful materials within the engine. This breather gasket is a genuine OEM replacement part and has been sourced directly from the manufacturer. This replacement breather gasket fits various different models of MTD, Cub Cadet, Yardman, Husky, and Troy-Bilt outdoor power equipment such as lawn mowers and trimmers. Please note this breather gasket is sold individually.

This is an authentic replacement bowl drain washer for use with lawn mower engines and other types of lawn and garden equipment. The washer is used to help seal the connection between the float bowl and the bowl drain screw in the engine. Although the washer is made from metal, it may still need to be replaced at some point if it becomes corroded, bent, or otherwise damaged. This would mean that it no longer provides a proper seal and that there could be leaks. Owners should periodically take the time to inspect the bowl drain washer, along with other elements of their machine, and replace them as needed. It may be a good idea to have several of the washers on hand. The genuine OEM replacement bowl drain washer is sold individually. It will work with a range of different types of machines including lawn mowers, snowblowers, pressure washers, and other small engines. Compatible brands include Craftsman, Toro, Tecumseh, Lawn-Boy, MTD, and Briggs & Stratton. Buyers should always be sure they are choosing the correct washers for their needs.

This intake manifold allows an engine to get the air it needs in order to run properly. Any engine runs on three things - air mixed fuel, the sparks, and combustion. It is the intake manifold that delivers the air to all of the cylinders and guarantees function. This gasket is used to replace a pre-existing intake manifold gasket that has dried out or has failed to keep the intake manifold properly sealed to the engine. This may allow air leaks or uneven air pressure in the cylinders, affecting how well the engine runs. Any gasket may wear out with time and use, and replacing the a failed intake manifold gasket with this OEM part is one way to ensure that the engine is again running at optimal levels. The repair requires wrenches, socket sets, and the appropriate components for the engine in question. This is a gasket for an intake manifold on an array of lawnmowers, lawn tractors, and snowblowers made by Tecumseh, Toro, MTD, and Lawn-Boy, and others. This high-quality intake gasket ships individually and is made of composite materials.

The oil seal is designed to stop fluid from leaking out, as well as to ensure that dirt and other debris do not make their way into the oil. When applied properly, it should create an impermeable seal. It also provides spacing between the crankcase and the crankshaft. If the oil seal has been damaged or has degraded because of wear and tear, it will need to be replaced. Some of the signs that the oil seal might be bad include leaks or an engine that is not performing properly. Users might also notice that the machine is going through oil quickly. This is an authentic OEM product that is sold individually. The oil seal can be used with many types of lawn and garden equipment including lawn mowers, snowblowers, tillers, pressure washers, wood chippers, generators, and other small engines. Compatible brands including Briggs & Stratton, Simplicity, Snapper, MTD, Lawn-Boy, Tecumseh, Cub Cadet, Toro, and Craftsman.

This replacement oil seal is an authentic OEM part for a wide range of snow thrower engines. As its name suggests, this part seals oil into the engine. More specifically, though, this oil seal is used in the crankshaft and camshaft. These two parts are responsible for translating reciprocal motion, and as such, they experience a lot of jostling. To keep from rubbing and creating friction, they require a lot of oil. So that the oil does not leak, they are sealed with oil seals. After prolonged exposure to hot oil, oil seals will begin to degrade and lose their ability to tightly seal off a shaft. When this happens, oil will leak from the engine and those parts will begin to rub against each other. As more and more friction builds up, the engine will start to quickly overheat and burn oil. Since these seals are located deep inside the engine, be prepared to follow the owner's manual on how to access and reassemble the cam and crankshafts. This replacement oil seal is a high-quality part designed to match the specifications of Toro, Tecumseh, Lawn Boy, and Husqvarna appliances. It comes sourced from its original manufacturer and does not include and additional hardware.

A gasket provides a mechanical seal between two mating surfaces to prevent leakage. This carburetor gasket, in particular, is designed to deliver an airtight seal for the carburetor so that air won't seep into where it shouldn't be. This gasket is essential for the proper functioning of the carburetor and the engine. A small engine is sensitive to minor changes in airflow, and an air leak would cause misfiring, engine vibration, and overheating. Over time, a gasket may wear out and begin to crack. Use this manufacturer-sourced gasket made from high-quality material as a replacement. This part is an original OEM replacement part that works with specific models of snowblowers, generators, and small engines from Tecumseh, MTD, Simplicity, Briggs & Stratton, Cub Cadet, Craftsman, and Toro. It is sold individually.

This high quality valve cover gasket is used on a selection of types of lawn and garden equipment to prevent leaks between the cylinder assembly and the valve cover. Some of the symptoms of a damaged or worn-out valve cover gasket include leaking oil and low compression when the tool is in use. If these things are happening, the gasket likely needs to be replaced.The process of replacing the valve cover gasket will involve removing the engine. Make sure the equipment is turned off and the spark plug wire has been disconnected. The engine will need to be disassembled to gain access to the valve cover gasket. After removing the original valve cover gasket, the new one should be placed. Reassemble the parts for reinstalling the engine.This plastic part is sold as an individual component. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The valve cover gasket is designed for use with lawnmowers, pressure washers, and wood chippers manufactured by Lawn-Boy, Tecumseh, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.

This cylinder head gasket is an original OEM part sourced directly from the manufacturer, Tecumseh. It is sold individually. A cylinder head gasket is an important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a lawn mower, a snow blower, a generator, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Tecumseh, and Simplicity.The cylinder head gasket part is crucial because it serves as the seal between the engine block and cylinder head or heads. Its purpose is to seal the combustion gases within the cylinders, thereby avoiding leaking of coolant or engine oil into the cylinders. Leaks in the head gasket can be problematic because they prevent the engine from running properly and often lead to overheating.The replacement or repair process of the cylinder head gasket should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This breather gasket is made of durable but flexible plastic, designed to seal the cylinder block and the breather body. A breather is a pipe that enables internal combustion in the engine to properly vent any crankcase pressure out of the engine. It is essentially a venting pipe or system and ensures that the engine's piston rings seal tighter against the cylinder walls (however many there are in that engine). When this gasket dries out, that pressure and seal cannot be created effectively and the engine may malfunction. Replacing the breather gasket means using a wrench to disassemble the breather, clean the surfaces, remove the original gasket, and use this authentic replacement part before reassembling This is an OEM replacement part designed for Toro, Tecumseh, Lawn-Boy, MTD, and Husqvarna equipment, including snowblowers and other small engine systems. This item ships individually.