Parts for Oem-Attachments 190-032 / 2014: Chute Assembly Parts

This replacement part is a gearbox assembly. This is a genuine replacement part made by MTD. The gearbox assembly is commonly found in the engine of most equipment and is responsible for ensuring the parts in the engine are working properly together. A new gearbox assembly might be needed if the current one is visibly damaged in any way, or is missing parts. This is common and typically due to normal wear and tear with years of extended use. Wear work gloves when replacing this part. Refer to the proper user manual for more information and specific instructions on how to replace or repair this gearbox assembly. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Snow not ejecting or throwing poorly from your snowblower? A damaged impeller assembly prevents snow from shooting out the chute. Direct OEM fit part.

Left hand auger assembly for snow thrower attachments. Replaces worn or damaged augers that fail to move snow effectively. Direct fit replacement part.

Right hand auger assembly for snow thrower attachments. Replaces worn or damaged augers that fail to move snow effectively. Direct fit replacement part.

Hex head screw for securing components on lawn mowers, tillers, and snow blowers. Replace missing, stripped, or corroded fasteners during repair.

This carriage bolt is a self-locking fastener made for use in round or square holes to attach metal to metal in outdoor equipment. These bolts provide an added safety feature because they can only be removed from one side. Carriage bolts can carry a large amount of weight, which makes them ideal for use in outdoor yard equipment. Carriage bolts may be used to attach a lawn mower's arm to the side support and other similar applications. If the bolt needs to be replaced, removal and installation are simple. Use a wrench to loosen the nut holding the washer and bolt in place. Once the nut is loose, the bolt can be unthreaded by hand and pulled out of the hole. To install, push the bolt back through the hole. If the fit is too tight to install by hand, use a hammer to tap it in place. Reinstall the washer and nut and tighten with a wrench.This carriage bolt is designed for use in lawnmowers, snowblowers, and lawn tractors manufactured by Craftsman, Bolens, Yard Machines, Yard-Man, and MTD. This is a genuine OEM product that comes directly from the manufacturer. Note: It does not come with a nut or washer.

Carriage bolt fastener for lawn and garden equipment. Replaces worn, stripped, or missing bolts that secure deck components and attachments.

Hex head self-tapping screw for outdoor power equipment. Securely fastens components throughout your machine. Replace if missing, stripped, or worn.

Secures pins and shafts on lawn tractors and riding mowers. Replace if bent, missing, or worn. Bow-tie design inserts through pre-drilled holes.

Replaces broken or sheared auger shear pin on snow throwers. This safety part snaps when auger hits obstacles to protect engine from damage.

Auger won't turn or sheared off? This roll pin connects the driveshaft to the auger and acts as a safety shear pin. Quick 10-minute fix for most models.

Bell washer adds spacing on shafts in lawn tractors, tillers, mowers, and chipper shredders. Replace if washer is missing, worn, or damaged during maintenance.

Auger bearing flange connects to the bearing to reduce friction during operation. Replace if worn or damaged to restore smooth auger rotation. Verify fit.

Flange bushing for snow throwers and lawn equipment. Replace when worn to maintain smooth operation and prevent part damage. Verify fit with your model.

Skid shoe that mounts to the bottom of your snow blower housing. Replace if cracked, bent, worn down, or missing to protect the auger housing surface.

Replacement spacer for outdoor power equipment. Installs between components to minimize vibration, friction, and heat. Replace if cracked or missing.

Bearing housing for snow blowers and snow throwers. Replace if worn, cracked, or causing unusual noise during operation. Verify fit with your model number.

If your snow blower won't move or gears slip, the transmission housing assembly may be damaged. This part houses critical drive components.

Snowblower won't move or loses power? This transmission reduction gear housing restores drive function. Moderate DIY repair for common drive issues.

This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.

Spiral axle for outdoor power equipment attachments. Installs as the main rotating shaft. Replace if bent, cracked, worn, or damaged from use.

This is a hi-pro key, or high profile key. This part is most commonly used to lock pulleys and gears into transmission shafts. Replacing a damaged, broken or lost hi-pro key is simple, requiring only a set of pliers to complete.This hi-pro key is an authentic OEM component sourced directly from the manufacturer. It is sold as an individual unit. It is compatible with lawn tractors and snowblowers from MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Huskee. It is made of high-quality, durable metal materials.

Spring pin for lawn tractors, snow blowers, and outdoor power equipment. Secures moving parts and linkages. Replace if bent, broken, or missing.

This worm shaft is a genuine MTD part, sold individually. This worm shaft can be used as a replacement part for a lawnmower, a lawn tractor, or a snowblower. This worm shaft provides a mounting on which the impeller can rotate within a centrifugal pump mechanism.The worm shaft might have to be replaced within the standard lifespan of such an outdoor appliance if it suffers damage that renders the component beyond functionality. This damage could take the form of punctures, scrapes, tears, or erosion to the metal material of which the worm shaft is compromised. If this occurs, the worm shaft should be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This worm shaft is compatible with the following outdoor appliance brands: MTD, Yard Man, and Troy-Bilt.

Fix loose or wobbling parts with this snowblower attachment thrust collar. Secures components together for proper operation. Direct fit replacement.

This grease plug is a genuine OEM replacement part sourced directly from the manufacturer. It is found on snowblowers and other outdoor yard machines on the gearcase assembly, which houses the auger gear. The grease plug seals the oil port on the gearbox. This keeps lubrication inside the gearbox and is the access point for adding more when needed. If this plug is lost, the gearbox's oil could leak out, and contaminants could get into the gearbox.Lubricate the contents of the gearbox before installing the new grease plug. Locate and remove the two screws on the side to drain the gearbox. Install the grease plug in the bottom. Refill the oil using the vent hole. Continue filling until oil is coming out the top side screw. Close everything back up, and the machine is ready for use. To prepare the equipment for long storage, remove the grease plug and check the oil level. If it is not to the top, add more lubricant before sealing the grease plug.This grease plug is made of durable black molded plastic and is sold as an individual unit. It is compatible with snowblowers and snow throwers manufactured by Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, and Husky.

Oil seal prevents leaks on snowblower worm shaft and bearing flange. Replace when you notice oil leaking from the engine area. Verify fit with your model.

Flat washer for lawn tractors and garden equipment. Distributes load under bolt heads and prevents surface damage. Replace if worn or missing.

Flat washer for lawn mowers and outdoor power equipment. Installs between fasteners to distribute load and prevent damage. Replace if missing or worn.

Thrust bearing supports axial load and rotation in snowblower drive systems. Replace if you notice wobbling, grinding noises, or reduced performance.

Flange bearing supports radial and light axial loads in lawn mowers and tractors. Replace if you notice wobbling, noise, or difficulty steering. Verify fit with your model number before ordering.

Flange bearing enables smooth rotation of internal components in your snowblower. Replace when you notice grinding noise or reduced performance.

Seals internal engine components to prevent oil leaks. Replace when you notice oil seeping around the crankshaft or engine housing. Confirm fit with your model.

Carriage bolt fastener for lawn and garden equipment. Replaces worn, stripped, or missing bolts that secure deck components and attachments.

Metal carriage bolt that fastens components together on lawn mowers, snow blowers, and garden equipment. Replace if bent, rusted, or missing.

Carriage bolt for snowblower attachments and snow throwers. Secures components and panels. Replace if bolt is stripped, rusted, or missing.

Carriage bolt for lawn mowers and outdoor power equipment. Fastens components together with a nut. Replace if lost, stripped, or damaged during repair.

Hex washer screw for lawn mowers, tractors, and snow blowers. Replaces stripped, missing, or damaged screws on deck panels and housing assemblies.

Hex screw for lawn tractors, mowers, snow blowers, and tillers. Replaces broken, stripped, or missing screws in various assembly points.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

Spring roll pin fastener for snow thrower assemblies. Secures moving parts and linkages. Replace if pin is missing, worn, or falls out during operation.

Replacement chute flange keeper for snow throwers. Secures the discharge chute assembly to the housing. Replace if broken, cracked, or missing.

Lower chute assembly for snow blowers. Directs snow discharge flow from the auger housing. Replace if cracked, broken, or missing for proper operation.

Upper discharge chute for snow blowers. Directs snow away from the machine. Replace if cracked, broken, or missing to restore proper snow discharge.

Chute adapter for snowblowers. Connects the discharge chute to the blower housing. Replace if cracked, broken, or no longer securely holding the chute.

Cable guide for snowblowers. Keeps control cables properly routed and secured. Replace if cracked, broken, or missing to maintain smooth cable operation.

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

If your snow thrower's controls feel loose or unresponsive, this joint assembly links components and transfers motion. Moderate difficulty repair part.

Replace your snow thrower's cable bracket if it's cracked, broken, or missing. This mounting bracket secures control cables for proper operation.

Replacement chute crank bracket for snow blowers. Holds and positions the chute at the proper angle. Replace if cracked, broken, or missing.

This is a flange nut that can be used in a variety of lawn and garden equipment from different manufacturers. The nut is made of metal, measures 5/16x18, and is used to secure components in place. It also assists with preventing backing out caused by vibration. Over time, the flange nut can become damaged and will need to be replaced. If the flange nut in lawn and garden equipment has become damaged, is loose, or gets lost, then replacement is required. The level of difficulty of replacing a flange nut depends on which parts it's securing and what kind of equipment it is installed on. This flange nut is an OEM replacement part that can be used with lawn mowers, snowblowers, wood chippers, tillers, log splitters, leaf blowers, and edgers by MasterCut, Craftsman, Yard-Man, Toro, Bolens, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold individually and will require a wrench or socket for installation.

Spacer for snow throwers and small engines. Fits over bolts or screws to maintain proper spacing between components. Replace if missing or damaged.