Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Maytag MVWC565FW0: 03 - Console And Water Inlet Parts

Parts for Maytag MVWC565FW0: 03 - Console And Water Inlet Parts

Location on Diagram
Part Description
Price & Availability
2
Best Seller
Product photo
4.9 (22)
By: Whirlpool
Part Number: WP8536939

This is a D-shaped knob insert or spring clip that fits inside a control knob and connects it to the control shaft on the dryer's front panel. It ensures the knob grips the shaft properly so you can turn the timer or selector. Replace this insert if your control knob spins freely without engaging the shaft or if the knob feels loose and won't stay in position.

More
$9.63

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
3
Product photo
By: Whirlpool
Part Number: WPW10193824

This left-hand end cap assembly restores a secure, finished mounting point on the appliance cabinet and helps keep internal components aligned and protected from friction or debris. Ideal when the original end cap is cracked, warped, or missing. What it does:

  • Replaces a damaged or worn left-hand end cap to maintain proper alignment of adjacent components
  • Provides a protective cover to prevent contact, rubbing, or debris entry at the cabinet edge
  • Helps reduce vibration-related noise caused by loose or misaligned parts
  • Fits into the original mounting location and matches OEM fit where specified
What's included: One left-hand end cap assembly Install notes:
  • Disconnect power to the appliance before starting any repair
  • Verify left/right orientation by comparing to the removed part prior to installation
  • Typical install requires removal of the adjacent trim or panel; handle parts gently to avoid damaging clips
  • If mounting hardware is missing or damaged, replace with OEM-specified fasteners

More
$50.66

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
4
Product photo
By: Whirlpool
Part Number: WPW10193821

Replace your dryer's right-side endcap assembly to restore a finished edge, secure panels, and prevent gaps. Fits select dryer and laundry center models.

More
$50.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
5
Best Seller
Product photo
4.9 (15)
By: Whirlpool
Part Number: WP8312709

The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment. 

Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.

Symptoms of a bad clip include:

  • Loose console assembly that is not securely fastened  
  • Misaligned or dangling controls that do not sit flush
  • Dislodged console at risk of detaching from housing
  • Missing clip leaving an open mounting point

This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$20.38

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
6
Product photo
By: Whirlpool
Part Number: W11116594

Fix a washer that won't start, unlock, or cycle through programs. This electronic control board manages all washer functions and user inputs. DIY repair.

More
$262.25

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
7
By: Whirlpool
Part Number: W10641362
$93.52

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
8
Product photo
5.0 (2)
By: Whirlpool
Part Number: WP489069

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
9
Product photo
By: Whirlpool
Part Number: WPW10285517

Fixes washer that won't select cycles or ignores knob position. This rotary encoder restores precise cycle selection on the control panel. DIY fix.

More
$65.74

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
10
Best Seller
Product photo
4.6 (8)
By: Whirlpool
Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

  • Loose or wobbly components within the appliance
  • Panels or parts that are not securely attached
  • Rattling or unusual noises due to loose parts
  • Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
11
Product photo
By: Whirlpool
Part Number: W10877409

Replacement power cord for laundry centers and washers. Installs at the rear panel to restore electrical connection. Needed when original cord is damaged, frayed, or missing.

More
$70.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
12
Product photo
5.0 (2)
By: Whirlpool
Part Number: W10846509

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.

Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads. 

Symptoms of a bad screw include:

  • Loose or detached rear bulkhead allowing side-to-side play
  • Excessive noise and shaking felt through the surrounding walls   
  • Development of micro-cracks around screw holes over time
  • Potential leak paths if holes are no longer sealed 

This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
13
5.0 (3)
By: Whirlpool
Part Number: W11837899
$22.47

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
14
5.0 (1)
By: Whirlpool
Part Number: W11837893
$14.77

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
15
Product photo
By: Whirlpool
Part Number: WPW10285511

Fix unresponsive or erratic cycle selection with this rotary encoder switch. Mounts behind the control knob to restore accurate cycle settings and indicators.

More
$91.23

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
16
By: Whirlpool
Part Number: W10694685

Wire harness for laundry center electrical connections. Replaces damaged, frayed, or burnt wiring harnesses. Essential for safe operation and power distribution.

More
$87.42

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
17
Best Seller
Product photo
5.0 (20)
By: Whirlpool
Part Number: W11038689

Fix a washer that won't fill, fills slowly, or drips when off with a new water inlet valve. Most DIYers complete this repair in 20-30 minutes.

More
$61.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
18
By: Whirlpool
Part Number: W10678671

Fix washer control issues or no power problems with this main wire harness. Routes signals between control board and motor. Moderate DIY repair.

More
$130.26

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
19
Product photo
By: Whirlpool
Part Number: W11164083

Fix an unresponsive or stuck control button that won't start cycles or ignores presses. Direct-fit pushbutton restores tactile feedback on your washer.

More
$51.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
20
Product photo
By: Whirlpool
Part Number: W10593638

Fix stuck or unresponsive washer buttons with this control pushbutton. Restores tactile response for cycle selection. Simple snap-in repair for laundry centers.

More
$65.63

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
21
Best Seller
Product photo
5.0 (1)
By: Whirlpool
Part Number: WPW10285518

Fix a washer that won't advance through cycles or gets stuck between wash and rinse. This cycle switch controls your wash sequence. DIY repair.

More
$76.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
22
By: Whirlpool
Part Number: W10694669
$32.83

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
23
Product photo
5.0 (1)
By: Whirlpool
Part Number: WPW10213953

Number-8, 18-thread mounting screw secures panels, brackets, and assemblies. Replace missing, stripped, or damaged screws to restore secure fitting.

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
24
Product photo
5.0 (4)
By: Whirlpool
Part Number: WPW10285512

Fix erratic or unresponsive cycle selections with this laundry center rotary encoder switch. Mounts behind the cycle knob to restore accurate settings.

More
$83.44

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
25
Product photo
5.0 (5)
By: Whirlpool
Part Number: W11693756

Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.

More
$12.54

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google