Parts for Lg LMV1813ST/02: Controller Parts

A Tap-Tite binding-head screw used to fasten appliance panels and components where a self-tapping metal thread is required. Replaces missing or damaged fasteners to restore secure assembly and reduce vibration or rattling. What it does:

• Creates its own mating thread in thin sheet metal for a secure hold without a nut.
• Holds panels, brackets, and trim in place to prevent looseness or movement.
• Commonly used where stripped, missing, or broken screws cause rattling, misalignment, or parts that won't stay attached.
• Compatible with standard screwdrivers or nut drivers sized to the binding-head.

• Disconnect power and unplug the appliance before working on it.
• Use the correct driver bit to avoid cam-out or head damage.
• Start straight and apply steady pressure; avoid overtightening to prevent stripping the formed threads.
• If the original hole is badly damaged, assess for repair or use of a larger fastener as needed.

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

This customized screw fastens specific panels, brackets, or internal components in LG appliances. Replacing a missing or stripped fastener restores a secure fit and helps reduce vibration, rattling, and premature wear. What it does:

• Secures mating parts such as panels, brackets, or mounts per the appliance design
• Restores proper fit when the original screw is lost, damaged, or stripped
• Helps reduce vibration and rattling from loose components
• Maintains alignment to support correct operation of the assembly

• Includes: One screw

• Disconnect power and, if applicable, shut off water and gas supplies before servicing
• Match length and thread to the original; start by hand to avoid cross-threading
• Use the correct driver size and tighten snugly without over-torquing
• Inspect and replace any damaged clips, inserts, or mating threads before reassembly

Fastener nut secures internal components in your microwave. Replace if stripped, rusted, or missing to restore tight hold and proper panel alignment.

Plastic film covers holes in the microwave inner door frame. Replace if bubbled, burned, cracked, or peeling. Attaches to door glass assembly.

Protective shield that covers internal components on the microwave door. Replace if cracked, broken, or tabs have snapped off during handle or latch repair.

Microwave won't start or stops mid-cycle? This door latch assembly engages door hooks and activates interlock switches to restore proper operation.

Microwave door won't stay closed or latch? This door latch spring provides tension to secure the door shut. DIY repair in under 10 minutes with video help.

Exterior handle for microwave doors. Replaces cracked, broken, or loose handles that no longer grip properly. Mounts to the door front panel.

Rotating glass platform for microwave cooking. Replace if cracked, chipped, or broken. Sits on the turntable support for even food heating.

Fix uneven heating or wobbling turntable with this rotating tray assembly. Replaces damaged or missing parts to restore smooth rotation and consistent cooking.

Turntable won't spin or rotates unevenly? This microwave turntable motor restores smooth rotation. Easy DIY repair—most complete it in under 10 minutes.

This is a metal plate that covers the vent duct area on an over-the-range microwave, directing airflow from the ventilation system and protecting internal components. It helps channel exhaust air properly when the microwave's vent fan is in use. Replace this plate if it is dented, corroded, or missing, as a damaged cover can reduce ventilation efficiency and allow grease or debris to enter internal areas.

Microwave turntable not rotating or making popping noises? This coupler connects the motor to the glass tray. Simple DIY fix takes under 15 minutes.

This is the vent grille assembly that mounts on the exterior of an over-the-range microwave, typically at the top or bottom of the unit. It covers the ventilation opening and directs airflow while providing a finished appearance. Replace this grille if it is cracked, broken, discolored, or if the louvers are damaged and no longer directing air properly.

Reflector panel for microwave ovens. Mounts inside cavity to direct waves. Replace if cracked, warped, or damaged to restore proper wave distribution.

Molded resin cover restores a clean look while protecting internal components. Replace your cracked, broken, or missing cover to keep parts shielded.

This is a small holder that mounts inside the microwave cavity to support a cooking rack or auxiliary shelf. It keeps the rack securely in position so food can be elevated for more even heating. Replace this support if it is broken, missing, or no longer holds the cooking rack firmly in place.

This is a metal cooking rack designed to sit inside the microwave oven cavity, providing a second level for heating multiple items at once. It allows for more even cooking by elevating food closer to the center of the microwave's energy field. Replace this rack if it is bent, has damaged feet or support clips, or if the protective coating is chipped or worn, which can cause arcing during use.

Threaded nut assembly secures internal components in your microwave. Replace if stripped, worn, or missing to eliminate rattling and maintain alignment.

Fix a microwave door that won't close or latch properly. This door latch holder secures the latch assembly for reliable door alignment and operation.

This assembly includes the door latch housing and interlock switches that detect whether the microwave door is properly closed. It ensures the microwave only operates when the door is securely latched, serving as a critical safety component. Replace this assembly if the microwave won't start, runs with the door open, blows fuses repeatedly, or if the door latch mechanism feels loose or broken.

Fix a microwave that won't start or runs with the door open. This door interlock switch ensures safe operation by detecting when the door is fully closed.

This is a micro switch that detects whether the microwave door is properly closed and latched. It is part of the safety interlock system that prevents the microwave from operating with the door open. Replace this switch if the microwave does not start when the door is shut, runs with the door open, blows a fuse when the door closes, or stops mid-cycle intermittently.

Microwave won't heat? A failing high-voltage capacitor disrupts the heating circuit. This part stores electrical energy for consistent operation.

Mounting bracket for microwave and microwave/hood combo units. Secures the appliance to the wall or cabinet. Replace if bent, cracked, or missing.

Fix loud rattling or scraping noises from your microwave with a new cooling fan blade. Prevents overheating by circulating air around internal components.

Microwave won't heat but runs normally? A failed magnetron is the likely cause. This part generates the microwaves that cook food. Moderate DIY repair.

Fix F4 error codes or sensor cook failures with this microwave humidity sensor. Restores automatic cooking cycles. Moderate DIY difficulty.

Fix loud noise, humming, or overheating in your microwave. This cooling fan motor restores proper airflow. Moderate difficulty repair with basic tools.

Replace your microwave's interior or underside light bulb when dim or burned out. Restores visibility for monitoring food. Confirm fit with your model.

Microwave not heating or making loud buzzing noise? The high voltage diode regulates power to the magnetron. DIY repair typically takes 30-45 minutes.

Microwave overheating or shutting off? This cooling fan assembly restores proper airflow to control components. Direct-fit replacement for failed units.

Mounting bracket for microwaves. Secures the unit to cabinetry or wall. Replace if bent, cracked, or missing to ensure proper installation support.

Interior bottom plate panel for microwaves. Covers and protects the oven floor from spills and debris. Replace if cracked, warped, stained, or missing.

This is a charcoal filter intended for use with LG microwaves. This charcoal filter removes odors and small particles emitted from foods that would otherwise circulate through the air during the cooking process. It is normal for a charcoal filter to become too dirty to function properly during the normal lifespan of the microwave. When that happens, a replacement filter is required to prevent odors.If strong smells are recognized during the operation of an LG microwave that weren't noticeable before, it's likely the charcoal filter has become clogged or needs to be swapped out with a new one. Replacing the charcoal filter in an LG microwave is a relatively easy task. It is recommended to first disconnect the appliance from the electrical outlet to prevent accidental activation of the device. Wear work gloves for protection. This LG charcoal filter is an authentic OEM replacement part. It is made specifically for LG brand microwaves and fits several different models. It is made of high-quality, durable materials. The LG charcoal filter is recommended to be replaced every six months to one year. It is sold as an individual unit.

Holds the light bulb and maintains electrical connection in your microwave. Replace when socket is cracked, heat-damaged, or causes flickering lights.

Microwave overheating or shutting off? This cooling fan assembly restores proper airflow to control components. Direct-fit replacement for failed units.

Plastic cover that encloses and protects the stirrer fan assembly. Replace if cracked, melted, warped, or missing to keep debris out of the fan area.

If your microwave's ventilation isn't circulating air properly, this circulation motor restores airflow. Direct-fit synchronous motor replacement.

Microwave suddenly loses all power? This thermal safety thermostat monitors temperature and cuts power when overheating occurs. DIY-friendly repair.

Microwave shuts off without beeping or won't power on? A failed thermostat often causes overheating shutdowns. This safety switch is moderately easy to replace.

Secures the light bulb and provides electrical connection in your microwave. Replace if cracked, heat-darkened, or loose to fix flickering or non-working lights.

This is a motor start/run capacitor that helps the appliance's motor start and run smoothly by supplying a brief boost of electrical energy. Replacing a failing capacitor restores reliable motor startup and operation. What it does:

• Provides the brief electrical surge needed to start and keep the motor running
• Commonly linked to motors that hum, fail to start, or run intermittently
• Helps prevent overheating from repeated start attempts when functioning properly
• Works with the appliance's start circuitry to ensure consistent performance

• Disconnect power to the appliance before accessing electrical components
• Discharge the capacitor and use insulated tools
• Observe polarity/terminal layout and secure connections to factory specifications
• Dispose of the old capacitor according to local electronic-waste regulations

Metal mounting plate that secures the microwave chassis to the wall or cabinet. Replace if bracket is bent, cracked, or missing during installation.

Holds the damper assembly in place inside the microwave cavity above the wave stirrer. Replace if bracket is bent, broken, or missing during installation.

Exhaust damper for microwave venting systems. Installs on rear exhaust to regulate airflow. Replace if cracked, broken, missing, or not sealing properly.