Parts for Lg MVEL2137D/00: Controller Parts

Template card for microwave/hood combo units. Installs as a reference guide or installation template. Replace if lost, damaged, or missing during installation.

A Tap-Tite binding-head screw used to fasten appliance panels and components where a self-tapping metal thread is required. Replaces missing or damaged fasteners to restore secure assembly and reduce vibration or rattling. What it does:

• Creates its own mating thread in thin sheet metal for a secure hold without a nut.
• Holds panels, brackets, and trim in place to prevent looseness or movement.
• Commonly used where stripped, missing, or broken screws cause rattling, misalignment, or parts that won't stay attached.
• Compatible with standard screwdrivers or nut drivers sized to the binding-head.

• Disconnect power and unplug the appliance before working on it.
• Use the correct driver bit to avoid cam-out or head damage.
• Start straight and apply steady pressure; avoid overtightening to prevent stripping the formed threads.
• If the original hole is badly damaged, assess for repair or use of a larger fastener as needed.

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts

Single wire harness for microwave hood combo units. Replacement for damaged, frayed, or disconnected internal wiring. Restores electrical connections.

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

Fastener nut secures internal components in your microwave. Replace if stripped, rusted, or missing to restore tight hold and proper panel alignment.

Replace your damaged or warped microwave outer door frame to restore proper fit and seal. Ensures stable door support and correct closure. Verify fit.

Sealing tape for microwaves creates an airtight barrier around cavities and components. Replace if peeling, cracked, or causing heat/moisture leaks.

Protective shield that covers internal components on the microwave door. Replace if cracked, broken, or tabs have snapped off during handle or latch repair.

This is the plastic hook that engages the door latch mechanism when the microwave door is closed. It ensures the door is securely latched so the microwave can operate safely. Replace this part if the microwave door will not stay closed, the door does not latch properly, or the microwave fails to start because the door switch is not being activated.

Microwave door won't stay closed or latch? This door latch spring provides tension to secure the door shut. DIY repair in under 10 minutes with video help.

Fix unresponsive buttons or blank display on your microwave with this control panel. Restores touchpad function and digital readouts for all cooking modes.

Fix a blank or flickering microwave display with this LED display module. Restores time, settings, and control panel visibility. Moderate DIY repair.

Lamp holder assembly secures and connects the light bulb in your microwave hood combo. Replace if lights flicker, don't turn on, or bulb won't stay in place. Confirm fit with your model number.

This U-bending case is the plastic housing that protects and routes the refrigerator evaporator's U-shaped tubing and helps direct airflow across the evaporator for effective cooling. It replaces a damaged or missing evaporator cover to restore proper airflow and protect tubing. What it does:

• Shields the evaporator U-bend and nearby tubing from contact and damage
• Directs airflow over the evaporator for more even cooling
• Helps keep frost and debris away from the evaporator assembly
• Prevents vibration noise caused by loose or damaged covers

• Always disconnect power to the appliance before starting any repair
• Access typically requires removing the freezer evaporator cover/panel; keep fasteners organized
• Handle the evaporator and tubing carefully to avoid punctures or bending

Replacement glass turntable tray for your microwave cavity. Sits on the roller support and rotates food during heating. Order if your tray is cracked or broken.

Wire harness for microwaves and microwave/hood combos. Connects internal electrical components. Replace if damaged, frayed, or burnt connections.

Fix uneven heating or wobbling turntable with this rotating tray assembly. Replaces damaged or missing parts to restore smooth rotation and consistent cooking.

Turntable won't spin or rotates unevenly? This microwave turntable motor restores smooth rotation. Easy DIY repair—most complete it in under 10 minutes.

This is a metal plate that covers the vent duct area on an over-the-range microwave, directing airflow from the ventilation system and protecting internal components. It helps channel exhaust air properly when the microwave's vent fan is in use. Replace this plate if it is dented, corroded, or missing, as a damaged cover can reduce ventilation efficiency and allow grease or debris to enter internal areas.

Turntable not rotating or making noise? This coupler shaft connects the motor to the glass tray for even heating. Takes seconds to install—no tools needed.

This replacement grille vent restores the lower/front airflow opening on compatible refrigerators, helping protect internal components and maintain proper ventilation. Designed to replace a cracked, warped, or missing lower vent grille. What it does:

• Covers and directs airflow at the refrigerator's lower/front ventilation area
• Protects condenser and kick-plate area from debris and accidental contact
• Restores proper airflow path that can reduce noise from turbulent flow
• Replaces cracked, broken, or missing grille that affects appearance and clearance

• One grille vent

• Remove power to the appliance before attempting removal or installation
• Typically fastens with a few screws or snap clips; inspect existing hardware and retain for reuse if undamaged
• Align tabs/clips and press or secure with the original screws until seated; do not force plastic parts to avoid breakage

Secures the interior light bulb in your microwave. Replace if the lamp is loose, rattles, or won't stay in position. Verify fit with your model number.

Captures grease and cooking residue from exhaust air to protect the blower and maintain airflow. Replace when saturated or damaged. Confirm fit with your model.

Weak or no ventilation? This microwave fan motor restores proper airflow to prevent overheating and eliminate cooking odors. Direct repair.

Threaded nut assembly secures internal components in your microwave. Replace if stripped, worn, or missing to eliminate rattling and maintain alignment.

Insulator cover for microwave/hood combo units. Replaces damaged, cracked, or missing insulation covers. Installs inside cavity to protect components.

LED light assembly for microwave hood combos. Installs in the light housing to illuminate the cooktop. Replace if cracked, dim, or not lighting properly.

Secures and protects your microwave's filter, maintaining proper airflow and positioning. Replace if cracked, broken, or filter won't stay in place. Verify fit with your model number.

Mounting bracket that secures internal microwave components. Replace if your original bracket is cracked, broken, worn, or missing to restore stability.

Inner perimeter trim that snaps onto the microwave door frame. Secures the door choke and maintains proper shielding. Replace if cracked, broken, or missing.

This lock mechanism secures the microwave door in the closed position, particularly on slide-out or over-the-range models. It engages to keep the door latched during operation and prevents accidental opening. Replace this part if the microwave door won't stay closed, won't latch properly, or if the unit fails to start because the door switch isn't being activated.

Fix a microwave door that won't stay closed or latch properly with this door locker mechanism. Simple repair restores secure door closure.

Microwave not heating evenly or turntable wobbling? This glass turntable plate rotates food for consistent heating. Simple 2-minute swap—no tools needed.

Mounting support bracket for microwaves and microwave-hood combos. Secures unit to cabinet or wall. Replace if bent, cracked, or missing hardware.

Fix a microwave door that won't close or latch properly. This door latch holder secures the latch assembly for reliable door alignment and operation.

This assembly includes the door latch housing and interlock switches that detect whether the microwave door is properly closed. It ensures the microwave only operates when the door is securely latched, serving as a critical safety component. Replace this assembly if the microwave won't start, runs with the door open, blows fuses repeatedly, or if the door latch mechanism feels loose or broken.

Fix a microwave that won't start or runs with the door open. This door interlock switch ensures safe operation by detecting when the door is fully closed.

This is a micro switch that detects whether the microwave door is properly closed and latched. It is part of the safety interlock system that prevents the microwave from operating with the door open. Replace this switch if the microwave does not start when the door is shut, runs with the door open, blows a fuse when the door closes, or stops mid-cycle intermittently.

Fix a microwave door that won't stay closed or pops open during use. This latch keeper holder restores proper door catch and alignment for safe operation.

Microwave not heating or sparking inside? This high voltage capacitor stores power for the magnetron. Common repair taking 30-45 minutes with care.

Mounting bracket for microwave and microwave/hood combo units. Secures the appliance to the wall or cabinet. Replace if bent, cracked, or missing.

Fix inaccurate cooking or sensor errors with this microwave sensor bracket. Secures the humidity sensor for proper automatic cooking. Simple 15-minute repair.

Exhaust duct for microwave hood combo venting system. Replaces cracked, damaged, or missing ducts. Connects unit to external vent opening for proper airflow.

Fix loud rattling or scraping noises from your microwave with a new cooling fan blade. Prevents overheating by circulating air around internal components.

If your microwave stops heating after less than a minute but the display stays on, the high voltage transformer may have failed. Moderately difficult repair.

Microwave won't heat but runs normally? A failed magnetron is the likely cause. This part generates the microwaves that cook food. Moderate DIY repair.

Fix F4 error codes or sensor cook failures with this microwave humidity sensor. Restores automatic cooking cycles. Moderate DIY difficulty.

Fix loud noise, humming, or overheating in your microwave. This cooling fan motor restores proper airflow. Moderate difficulty repair with basic tools.

Microwave won't turn on or has no power? A failed thermostat often causes complete power loss. Moderate DIY repair requires disassembly to access.

Microwave not heating or making loud buzzing noise? The high voltage diode regulates power to the magnetron. DIY repair typically takes 30-45 minutes.

Microwave won't turn on or keeps blowing fuses? This fuse assembly with wiring harness restores overcurrent protection. Direct replacement part.

Microwave suddenly loses all power? This thermal safety thermostat monitors temperature and cuts power when overheating occurs. DIY-friendly repair.

Mounting bracket for microwaves. Secures the unit to cabinetry or wall. Replace if bent, cracked, or missing to ensure proper installation support.

Interior bottom plate panel for microwaves. Covers and protects the oven floor from spills and debris. Replace if cracked, warped, stained, or missing.

Protects microwave interior light bulb from grease and moisture. Replace if cracked, discolored, or broken to restore proper lighting. Verify fit with your model.

Removes cooking odors, smoke, and grease from recirculating microwave vents. Replace when odors persist despite cleaning. Confirm fit by model number.

Structural mounting bracket for microwave installation. Secures microwave to wall or cabinet. Replace if bent, cracked, or missing for safe support.

Fix scraping and clunking noises from your microwave with this motor support bracket. Secures motor positioning and reduces vibration. 10-minute repair.

Replacement filter support plate for microwave ovens. Secures and positions the grease filter in place. Order a new part if yours is cracked or broken.

Exhaust duct for over-the-range microwaves. Replaces cracked, damaged, or missing ducts that vent cooking fumes and steam from your kitchen.

Mounting supporter bracket for microwaves. Installs on cabinet or wall to provide structural support. Replace if bent, cracked, or missing hardware.

This box-style film capacitor helps stabilize and filter voltage in the appliance's control/power circuitry, protecting electronics from spikes and electrical noise for more reliable operation. What it does

• Smooths and filters voltage to reduce electrical noise and transient spikes.
• Helps ensure stable operation of control boards and motor drives.
• A failing capacitor can cause intermittent operation, control errors, or failure to start.
• Commonly used where low-loss, stable capacitance is required for power or signal circuits.

• Disconnect power to the appliance before servicing.
• Discharge the capacitor fully before touching terminals to avoid shock.
• Inspect mounting and wiring; replace with identical type and polarity/orientation if required.

Rotating support plate that sits beneath the microwave glass turntable tray. Replace if cracked, broken, or worn to restore stable, centered rotation.

Metal mounting plate for over-the-range microwaves. Installs between wall/cabinet and microwave unit to anchor and stabilize. Replace if missing or damaged.

Complete hardware kit for mounting your microwave. Includes all brackets, screws, and fasteners needed for secure installation. Replaces missing or damaged parts.

Holds the damper assembly in place inside the microwave cavity above the wave stirrer. Replace if bracket is bent, broken, or missing during installation.

Exhaust damper for microwave venting systems. Installs on rear exhaust to regulate airflow. Replace if cracked, broken, missing, or not sealing properly.