Craftsman Chainsaw Parts

This part is a replacement choke lever. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken choke lever in line trimmers.The choke lever enables the choke plate to open or close within the carburetor, which helps to power on the engine. The engine may not start if this part is faulty, so if damaged, it should be replaced. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular choke lever, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality plastic. This choke lever can be used with a variety of line trimmer models manufactured by Husqvarna, Poulan, and other brands.

This is a genuine fuel pickup assembly that is an integral part of many models of chainsaws from major manufacturers. This component is part of the fuel system and ensures the gasoline makes it from the fuel tank to the chainsaw's carburetor. When the primer bulb is pressed, it causes air to leave the carburetor so it can be filled with fuel. The extra fuel moves back into the tank using a return line. This part is made from quality materials but can wear out or become damaged, which will require it to be replaced.Basic tools like an Allen wrench and a screwdriver may be needed to replace the broken or damaged fuel pickup assembly. A pair of work gloves is also useful for the process. Make sure the chainsaw is powered off and placed on a level surface. Disconnect the spark plug wire to prevent the engine from powering on. Disassemble the tool to gain access to the fuel pickup assembly so it can be replaced with a new component.This is an authentic OEM replacement part that is sourced directly from the manufacturer. This fuel pickup assembly is sold individually. The part is designed to be compatible with chainsaws manufactured by Craftsman, Husqvarna, and Poulan.

This genuine OEM hub spring is designed to fit select models of chainsaws. The hub spring is responsible for providing the spring action that reacts to the pull starter. This generates the power that rotates the flywheel and helps engage the engine in the starting process. The spring becomes worn and extended with regular use. Since it is metal, it may also be subject to corrosion or other environmental damages. In either case, the hub spring should always be replaced promptly if it is found to be defective or damaged in any way. This genuine hub spring can be used for a variety of chainsaws from Poulan, Husqvarna, AYP, Sears/Craftsman, Roper, Poulan Pro, and Weed Eater. This item is sold as an individual unit. Springs are under pressure and can be dangerous to replace so always use caution. Allow the engine to cool before beginning repairs and always wear gloves for any kind of engine part repairs or replacements.

This 1/4-20 hex nut has a great variety of uses on lawn and landscaping equipment. As a lock nut, it can be tightened and retains its grip, even without the use of a washer. This particular piece of hardware appears in many connective points on push mowers, zero-turn mowers, riding mowers, tillers, lawn tractor implements, and other types of equipment manufactured by Husqvarna, Poulan, Jonsered, and Weed Eater. For instance, with MTD mulching mowers, these hex nuts are used to secure the mower housing to the manifold of the mower. More than just with gasoline-powered lawn tools, these versatile nuts are also found on handheld tools like impact wrenches and tools driven by compressed air. Hex nuts bind tightly with their locking grip and seldom come off. The more likely scenario, especially since so many are used in manufacturing and by power tools, is that these nuts will become lost in the course of maintaining, cleaning, and repairing mowers and other equipment. For this reason, it's always important for the user to purchase more than the anticipated number needed. Make sure also to purchase hex nuts like these that are OEM certified and guaranteed.

This is an adjusting wrench tool that is designed to be used for the maintenance of 50cc chainsaws. This tool includes two wrench sockets with screwdriver functionality. The main way an adjusting wrench tool is used is to adjust the bar tension. This ensures the chainsaw chain is tight and the tool is ready for use. It can also be used to quickly remove spark plugs on the tool.The adjusting wrench tool is an identical replacement to be used with the original is faulty or missing. It doesn't stay on the chainsaw but acts as a tool to ensure the chainsaw is in good working order. It's made of strong metal and can be lost or damaged through regular use. If the current adjusting wrench tool is lost or damaged, this replacement part will do the same things as the original. It fits many different chainsaws by various manufacturers.The adjusting wrench tool is sold as a single device and sourced directly from the manufacturer. It is an authentic OEM replacement tool that can be used with Poulan, Craftsman, and Husqvarna chainsaws.

This part is a replacement adjustment block. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective adjustment block in outdoor power equipment.This adjustment block is essential to proper equipment functionality and will need to be replaced if broken, faulty, detached, or ineffective in any way. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this adjustment block, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this adjustment block is suitable for use on outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is an adjustment block. It is a genuine replacement part made by MTD. This part is usually found in chainsaws and allows the user to adjust the tightness and position of the chain that is being used. A new adjustment block might be needed if the user notices that the current chain is becoming lose or being moved from its original position and the user cannot adjust it. The adjuster block can become damaged over time due to normal wear and tear and it is recommended that it be replaced if this is the case. Be sure to refer to the specific user manual for more information on replacing this part. This adjustment block is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure long-lasting use.

The breather hose is designed as a valve or vent that only functions one way. It allows air into the fuel tank but ensures that no air or emissions escape the tank. When this hose is not functioning, emissions and air could be leaking from the tank and cause the engine to perform poorly or not perform at all. The hose could become cracked or damaged, or the ends could lose their seal. Either way, a replacement hose will solve the problem and get the equipment back in order. This genuine OEM replacement breather hose is made by MTD and manufactured to exact specifications. It is compatible with several engines on lawn mowers, snowblowers, and chippers from brands like Troy-Bilt, MTD, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Husky. There are more than 150 compatible machines for this breather hose. This high-quality composite rubber hose is sold individually.

This baffle is a genuine MTD part. It is made for use with walk-behind and self-propelled lawnmowers. It is a rear mulching baffle, which means that it aids in mulching lawn clippings, cutting them down into very small pieces. These clippings can either be disposed of, composted, or used as fertilizer.This mulching baffle is a genuine OEM part sourced directly from the manufacturer and is sold individually. Most mowers have more than one baffle, so be sure to check if others also need to be replaced.This baffle is manufactured for compatibility with lawnmowers made by Bolens, Columbia, MTD Pro, White Outdoor, Yard Machines, and Yard-Man. Some of these models are electric mowers, while others are gas-powered. It is also compatible with some stand-alone mulching kits. Use the compatibility checker before purchasing.

This replacement part is a chain and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This chain is found in power equipment such as a chainsaw. The chain is responsible for cutting or shredding branches or other landscaping. A new chain might be needed if the user notices that the current one is worn down and not cutting as efficiently as in prior uses. After years of normal wear and tear it is not unusual for chains to become dulled or worn down. To fix this simply replace the chain and the appliance should be good as new. Be sure to wear work gloves while attempting this repair as the new chain will be very sharp and can injure those who touch it. This chain is sold individually and is sourced directly from the manufacturer to ensure a proper fit on different chainsaws. This part is a genuine OEM replacement part.

This cutting chain is a genuine MTD part, sold individually. This cutting chain can be used as a replacement part in a chainsaw. The purpose of the cutting chain in a chainsaw is to utilize the teeth on the outside of the chain to rotate and chop through wood and timber when in operation.The cutting chain in a chainsaw might be subject to replacement if the teeth break off or that the chain cannot rotate as usual when propelled to do so by the engine. If the teeth of the cutting chain are dented, warped, cracked, punctured, or eroded, the cutting chain should be removed and replaced by this genuine OEM replacement part. This could occur from general wear and tear over long-term use or as the result of an accident with the chainsaw. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.The operator of the appliance should be aware that this component is a genuine OEM replacement part, sourced directly from the manufacturer. This cutting chain is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, and Murray.

This replacement part is a carburetor assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This carburetor assembly is found in appliances that contain and engine. The carburetor is responsible for supplying the internal engine with the air and fuel mixture. This part is able to regulate the air flow in the specific compartments and allows the engine to run smoothly and effectively.A new carburetor assembly might be needed if the current carburetor is malfunctioning or not working at all. The user might be able to tell if the part needs replacing if there are noises coming from inside the engine. This might reveal that the carburetor is not connected correctly or is damaged. Be sure the device is completely shut down prior to starting a repair as the engine can be dangerous if it is powered on.This part is sold individually and is compatible with lawn equipment made by MTD. Note that this part is a genuine OEM replacement part.

This part is a replacement handle. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken handle in chainsaws.The handle is essential to proper equipment functionality as it ensures correct and accurate usage of the chainsaw. If the handle is broken, snapped, bent, detached, or otherwise ineffective, it should be replaced immediately. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this particular handle, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This handle can be used with a variety of chainsaw models manufactured by MTD, Craftsman, and other brands.