Craftsman Chainsaw Parts

This bar adjuster knob is used on a variety of chainsaws. It works by adjusting the amount of bar tension which helps to tighten the chain on a chainsaw. Without the part, the tension of the bar would not be kept in the correct area and the chain could come loose. This could result in a chainsaw that doesn't run or is too dangerous to use. A visual inspection of the knob can indicate if it is damaged or no longer working correctly.If the bar adjuster knob needs to be replaced because it's stripped or otherwise damaged, the process is simple. A hammer and screwdriver will be required to make the replacement. Pull on the handle of the adjustment knob and place a screwdriver inside to remove it. A flat screwdriver can be placed against the metal nut at an angle. Hit the back of the screwdriver with a hammer to pull the nut loose if the knob is stripped. This will help remove the knob and install a new one.This bar adjuster knob is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold individually. It is compatible with many Poulan Pro, Craftsman, and Husqvarna chainsaws.

A clutch on a chainsaw is what enables the engine to turn a low RPM without the chain moving. It is a crucial component for operating the device safely. Without it, the blade or chain spins continually and leaves operators at risk for harm or injury. The clutch on any chainsaw works automatically and does not have a control or trigger to activate it. If your chainsaw is not automatically idling without halting the chain spinning, it could be time for a new clutch assembly. It requires only a screwdriver to do the repair This is a full replacement clutch assembly for chainsaws made by Husqvarna, Poulan, Craftsman, and several other brands. This OEM part is complete and features the clutch shoes and spring. It is an individual component and is not shipped with other hardware..

This is a replacement blade holder. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or otherwise defective blade holder on a variety of different lawnmower models. This part securely holds the blade of the lawnmower and allows the blades to be interchanged or replaced more easily. This part is subject to regular wear and tear from debris or contact with hard surfaces and may require replacement. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. Proper tools are required to replace this part. For more accurate information on how and where to install this blade holder, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this blade holder is suitable for use on several different lawnmower models manufactured by Husqvarna and Craftsman. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a replacement blade. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, blunt, or otherwise defective blade on a variety of different lawnmower models. The blade cuts the grass itself. This part is essential to the function of the lawnmower. Blades experience high levels of wear and tear and can become blunted, chipped, or broken throughout their lifespan. This can prevent the lawnmower from cutting grass effectively. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required to replace this part. For more accurate information on how and where to install this blade, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this blade is suitable for use on several different lawnmower models manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

Note: This is ONE blade.

This exhaust pipe is a genuine Husqvarna part, sold individually. This exhaust pipe can be used as a replacement part in a lawn mower. The purpose of the exhaust pipe in a lawn mower is to redirect gases and combustion away from the appliance and from the operator.The exhaust pipe in a lawn mower might have to be replaced if it or any component near it shows signs of damage. Signs of damage to the exhaust pipe can include increased or unusual noise coming from the exhaust, reduced fuel economy, strong gasoline odor, hard starting or misfiring engine, or a burning smell from the exhaust. If any of these signs of damage occur, the exhaust pipe should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This exhaust pipe is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This replacement part is a gear cap. This is a genuine replacement part made by Husqvarna. This part is small but used to keep different gears within the lawnmower safe and secure during use. This part is made of durable plastic and meant to be a strong protector for many gears. A new gear cap might be needed if the current one is missing or damaged in any way. This can include being dented, bent, cracked, or chipped. If the gear cap is not able to stay in place, it might be time to replace it. Be sure to wear work gloves during this repair. It is also recommended that the user refers to the appropriate user manual before replacing this part. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit and long-lasting use.

This part is a replacement engine exhaust tube. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current exhaust tube is broken or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The exhaust tube connects to the muffler and the engine exhaust port and allows fumes to be properly expelled from the engine. The exhaust tube can become dented, damaged, or detached and thus may require replacement. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this exhaust tube, the appropriate owner's manual and equipment diagrams should be referred to. This exhaust tube is suitable for use on a variety of different lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually

This piston ring is a genuine Husqvarna part, sold individually. This piston ring can be used as a replacement part in a chainsaw. The purpose of the piston ring in a chainsaw is to seal off the combustion chamber from possible fuel leakages as well as to ensure the proper transfer of heat from the piston into the cylinder.The piston ring might have to be replaced if it suffers from signs of clear damage. This damage could manifest in the form of white or gray smoke pluming from the exhaust, reduced fuel economy, reduced acceleration ability, and overall weakened performance of the appliance. If any of these symptoms occur and are attributable to damaged piston rings, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. The operator of the appliance should be aware that this component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This piston ring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.

This replacement part is a baffle. It is a genuine replacement part made by MTD. This part can be added to different types of lawnmowers and is used to enhance the airflow underneath the mowing deck. This helps the grass clippings and other debris move smoothly into the bag or discharge chute. A new baffle might be needed if the user notices that the grass and other debris is moving in the wrong direction as it is turning into mulch. This can be because the air underneath the deck is not moving properly and the grass is not being deposited in the correct place. Be sure to refer to the user manual for more detailed instructions on how to replace or install this part. This baffle is sold individually and is sourced directly from the manufacturer. This is also a genuine OEM replacement part to ensure proper fit.

This replacement part is a flange nut. It is a fastening component used in conjunction with a screw or bolt to secure parts within equipment.A new flange nut might be needed if the current one has been stripped by overtightening. Small parts like this one may experience enough friction to be worn down with extended use. Be sure to wear work gloves when replacing small parts and working near the engine. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

The hex lock nut is found on many different types of outdoor lawn equipment, as well as other types of equipment. The lock nut works to secure bolted joints by adding friction to the bolt threads. The nut has flat sides, which can easily be gripped by a wrench to be tightened or loosened as needed. These types of nuts are common, as they provide easy assembly and disassembly of various parts. Buyers may need a new hex lock nut for a range of reasons. The nut that is currently on the equipment could have become damaged or lost while working on the machine. It is vital for all of the nuts to be in place and properly secured on the equipment before use. This is an authentic OEM part. Some of the products that use hex lock nuts include lawn mowers, snowblowers, tillers, edgers, string trimmers, and log splitters. Common equipment brands using these nuts include Craftsman, Toro, Cub Cadet, Yard Machines, and Troy-Bilt.