Craftsman Lawn Mower Parts

Designed for use with a wide range of string trimmers, this momentary switch is a genuine OEM replacement part. A momentary switch, also known as a kill switch, is a safety precaution that kills an appliance's engine in a moment, even if the engine is not set to the off position. This helps prevent accidents if the operator begins to lose control of the trimmer. At the touch of a button, the engine cuts and cannot be restarted for a short period (usually about five seconds). Momentary switches are positioned in a way that they don't often sustain damage but, over time, they can wear out. Once a switch stops working, it will need to be replaced to ensure safe operation. This is a fairly straightforward fix that only requires a screwdriver to open the tiller's handle and pliers to safely remove the wiring. This part is designed for string trimmers made by Poulan, Weed Eater, Paramount, and Husqvarna. It ships individually of any other hardware is comes sourced from the original manufacturer.

This carburetor is designed to mix gas and oil together before moving the mixture into a chainsaw's engine. It is a single-cylinder model with an auto-choke system and requires regular maintenance to stay in good shape. Changing the oil, replacing the air filter, and adding a fuel stabilizer will help keep the engine performing at its best. If the carburetor isn't working properly, this may be due to blockages of debris, dirt, and fuel. If the fuel tank is full but the engine refuses to start, it's a good idea to test the carburetor for problems. Take out the air filter and then pour a small amount of fuel into the carburetor itself. Yank on the starter rope and see if the motor starts. It should die shortly after. If this occurs, the carburetor may have a problem and require replacement. This is an individual part that is compatible with Poulan, Craftsman, and Husqvarna chainsaws. The carburetor is a genuine OEM product that is provided directly from the manufacturer. It comes with a rubber O-ring and a gasket. A screwdriver will also be required to make a replacement.

This nose roller is a genuine Husqvarna part, sold individually. This nose roller can be used as a replacement part in a lawn mower. This part props the front of the mower deck up.The nose roller could be subject to damage in the form of puncturing, tearing, ripping, scraping, denting, or eroding; if any of these forms of damage prevent the nose roller from protecting the deck, the nose roller should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This nose roller is compatible with the following outdoor appliance brands: Husqvarna, Jonsered, Craftsman, and Poulan.

This torsion spring is a genuine Husqvarna part, sold individually. This torsion spring can be used as a replacement part in a lawn mower. The purpose of the torsion spring in a lawn mower is to store mechanical energy through the steady maintenance of spring tension such that it can deliver an equal amount of force in the opposite direction when twisted.The torsion spring could suffer from general wear and tear over long-term use or could be rendered broken after a collision with a hard object. If this occurs, the torsion spring should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This torsion spring is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Poulan Pro, and Craftsman.

Lawnmowers are equipped with mulching blades that spin at rapid rates to mulch up grass into small pieces. Blades can wear down, chip or break during use, either because of normal wear and tear or rolling over rocks and tree roots. A damaged blade will not make consistent cuts, and a replacement blade is required to improve the lawnmower's performance.Removing the blade on a lawnmower to replace it with a new one requires a pair of protective gloves. Check the size of the blade bolt to determine what size wrench is needed to remove it. Loosen the bolt, remove the old blade, and install the replacement blade safely, being mindful of the sharp edges.The blade is 21 inches long and compatible with all types of mowers and mulchers from Husqvarna, Poulan, Weed Eater, and Jonsered. This is an authentic OEM replacement part supplied by the manufacturer. It is constructed of heavy-duty metal material and sold as an individual unit.

This idler belt keeper is a genuine Husqvarna part, sold individually. This idler belt keeper can be used as a replacement part in a lawn mower. The purpose of the idler belt keeper in a lawn mower is to affix to the idler pulley so that the idler belt can be rotated, facilitating movement during the standard operation of the lawn mower.The idler belt keeper might need to be replaced at some point within the standard lifespan of a lawn mower if the component suffers damage that renders it beyond functionality. If the idler belt keeper is punctured, scraped, warped, eroded, dented, cracked, or otherwise damaged, the component should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, as safe operation of the appliance cannot be guaranteed without the idler belt keeper in place. It is a simple replacement process that will require only basic tools to properly execute.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This idler belt keeper is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Ariens.

This part is a container bag that is used on lawn tractors. The purpose of the container bag is to collect and hold the grass clippings that are blown up from the mower deck so that the grass clippings are not left on the lawn itself.A new container bag will be needed if there are any rips, tears, or holes in the bag. If this is the case, the container bag will no longer be able to hold the grass. The container bag may become worn or damaged after regular use over a period of time. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This container bag is a genuine Husqvarna part. It is sold individually. This particular container bag is compatible with lawn tractors that are manufactured by Husqvarna and Craftsman.

This is a replacement lawn tractor shield-deflector. The shield-deflector, or grass chute, is made from strong, high-quality plastic and attaches to the lawn tractor deck's side. Its purpose is to direct grass clippings and other debris away from the rider while mowing. Over time, the original shield-deflector can become worn and damaged, allowing debris to blow up onto the lawn tractor driver. Debris expelled from the lawn tractor can cause property damage, injury, or even death. Ensure the area is always clear of bystanders while mowing and consult the operator's manual to ensure proper installation of all replacement parts.This shield-deflector is designed to be a replacement for original worn or damaged shield-deflectors on AYP, Jonsered, Redmax, Craftsman, Poulan, Husqvarna, Poulan Pro, Weed Eater, and McCulloch 46-inch lawn tractor decks. This replacement shield-deflector is an OEM part that is sourced directly from the manufacturer. The shield-deflector is sold individually and does not come with hardware included. Tools needed for replacement may consist of; 1/2 inch socket, 7/16 inch socket, vise-grip pliers, a large flat-head screwdriver, and a hammer.

The washout port helps to make cleaning a mower deck easier and it is used on mowers and tractors. Users should wash the deck of the mower to reduce buildup. Doing so will help owners to extend the life of the mower deck. The washout port is the area that attaches to the deck of the machine. Owners can attach a hose and clean away grass and debris that have built up under the deck.The washout port is made from metal and is durable. However, there could still be a need to replace it in the event it becomes damaged or corroded. Replacement of the washout power is relatively simple. It will require the use of a socket set and a wrench set.This washout port is a genuine OEM replacement part for use with certain models of lawn tractors from Husqvarna, Craftsman, Jonsered, and Poulan. It is sold individually.