Craftsman Lawn Mower Parts

This ball bearing and seal are used in a range of chainsaw models. It acts as part of the blade assembly and is designed to both lessen friction and stabilize moving parts. This bearing is also set within a race and the entire race/bearing/seal assembly must be replaced at the same time. The bearing is encased with a rubber seal, which prevents fuel leakage and keeps the engine working smoothly. It does not impede the bearing as it turns. Ball bearings are placed in high contact areas and wear down due to friction. They need to be regularly replaced for optimal performance. If the engine shows difficulty while running, or is louder than usual, the seal or bearing may have worn down. This OEM replacement part is sourced from the manufacturer and works with certain models of Poulan small engines, including the Poulan/Poulan Pro 2900, and Husqvarna chainsaws. This part replaces parts 530019259 and 530047827, both of which are obsolete.

Replacement assist handle for line trimmers. Mounts to the shaft to provide steering control and grip during operation. Replace if cracked or broken.

Chain overheating or not staying oiled? This oil pump kit delivers consistent lubrication to prevent chain damage and ensure safe operation. DIY fix.

Designed for use with a wide range of string trimmers, this momentary switch is a genuine OEM replacement part. A momentary switch, also known as a kill switch, is a safety precaution that kills an appliance's engine in a moment, even if the engine is not set to the off position. This helps prevent accidents if the operator begins to lose control of the trimmer. At the touch of a button, the engine cuts and cannot be restarted for a short period (usually about five seconds). Momentary switches are positioned in a way that they don't often sustain damage but, over time, they can wear out. Once a switch stops working, it will need to be replaced to ensure safe operation. This is a fairly straightforward fix that only requires a screwdriver to open the tiller's handle and pliers to safely remove the wiring. This part is designed for string trimmers made by Poulan, Weed Eater, Paramount, and Husqvarna. It ships individually of any other hardware is comes sourced from the original manufacturer.

This carburetor is designed to mix gas and oil together before moving the mixture into a chainsaw's engine. It is a single-cylinder model with an auto-choke system and requires regular maintenance to stay in good shape. Changing the oil, replacing the air filter, and adding a fuel stabilizer will help keep the engine performing at its best. If the carburetor isn't working properly, this may be due to blockages of debris, dirt, and fuel. If the fuel tank is full but the engine refuses to start, it's a good idea to test the carburetor for problems. Take out the air filter and then pour a small amount of fuel into the carburetor itself. Yank on the starter rope and see if the motor starts. It should die shortly after. If this occurs, the carburetor may have a problem and require replacement. This is an individual part that is compatible with Poulan, Craftsman, and Husqvarna chainsaws. The carburetor is a genuine OEM product that is provided directly from the manufacturer. It comes with a rubber O-ring and a gasket. A screwdriver will also be required to make a replacement.

Mower won't stop or squeals when braking? This brake pad creates friction against the rotor to safely stop your riding mower. Direct replacement part.

Mower won't self-propel or drive wheels slip? This drive pawl engages the transmission for forward motion. Common fix for lost traction on walk-behind mowers.

Mower won't start with key turn? This ignition switch restores starting function on riding mowers and lawn tractors. Simple repair for most DIYers.

Replacement nose roller that supports the front of your riding mower deck. Needed when roller is cracked, punctured, torn, or worn from ground contact.

Black 54-inch discharge deflector for riding mowers and tractors. Directs grass clippings safely away from deck. Replace if cracked, broken, or missing.

Torsion spring for walk-behind lawn mowers. Mounts to chassis to maintain spring tension and store mechanical energy. Replace if broken or damaged.

Replace your worn, chipped, or broken walk-behind mower cutting blade. Installs under the deck to restore clean, even cuts after impact damage or wear.

Cotter pin fastener for riding mowers and lawn tractors. Secures moving parts and linkages. Replace if bent, broken, or missing to restore proper assembly.

Left-hand stationary idler pulley for riding mowers and lawn tractors. Replaces cracked, worn, or broken pulleys affecting belt routing and tension.

Deck drive spring for riding mowers and tractors. Replaces cracked, broken, or worn springs on mower deck drive systems. Direct fit installation.