Craftsman Lawn Mower Parts

This genuine OEM replacement part idler pulley plays an important part on many lawn tractors, mowers, and snowblowers. It drives the engine's belt system, particularly the belts connected to the crankshaft. It helps to create motion throughout the engine, including in the steering pump, air compressor, and the alternator. Therefore, without this pulley, the engine will not function properly. As with any part of an engine, an idler pulley will begin to wear down over time. When this happens, an idler pulley will begin slipping, causing the belts to no long run smoothly. If an idler pulley breaks completely, the engine will not start. Before replacing an idler pulley, be sure to let the engine cool completely, as you will have to remove several parts with a screwdriver and socket wrench set. This idler pulley will work with Troy-Bilt, Yard Machines, MTD, Cub Cadet, and Yard Man appliances. It is a high-quality replacement part sourced directly from the original manufacturer. This part ships individually.

This replacement part is a seat. This is a genuine replacement part made by MTD. This part is usually found on lawn tractors and provides the user with a comfortable place to sit while using the equipment. This part provides lower back support while the user is in the seated position. A new seat might be needed if the current one has become worn down. Additionally, if the seat does not provide enough support as during prior uses, it might be time to replace this part. The seat can become damaged after years of normal use. Damage can include being torn, shredded, or punctured. This should be an easy repair and require common household tools. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a flange nut. It is a fastening component used in conjunction with a screw or bolt to secure parts within equipment.A new flange nut might be needed if the current one has been stripped by overtightening. Small parts like this one may experience enough friction to be worn down with extended use. Be sure to wear work gloves when replacing small parts and working near the engine. This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This deck assembly is a genuine MTD part, sold individually. This deck assembly can be used as a replacement part in a lawn mower. The purpose of the deck assembly is to protect the operator from flung debris that can be accumulated in and around the blades of the lawn mower during the typical operation of the appliance.The deck assembly in a lawn mower is a large component that can suffer damage; if the damage prevents the deck assembly from serving its key function, the deck assembly might be subject to a complete replacement. This could occur over general wear and tear from long-term use, as a result of an accident or collision with a hard object, or from exposure to the elements. If this occurs, the deck assembly should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This deck assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, and Yard Man.

This is a hi-pro key, or high profile key. This part is most commonly used to lock pulleys and gears into transmission shafts. Replacing a damaged, broken or lost hi-pro key is simple, requiring only a set of pliers to complete.This hi-pro key is an authentic OEM component sourced directly from the manufacturer. It is sold as an individual unit. It is compatible with lawn tractors and snowblowers from MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Huskee. It is made of high-quality, durable metal materials.

This replacement part is a spindle pulley, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Spindle pulleys work with other parts of the engine to help create the turning or spinning mechanisms inside the machine. A new spindle pulley might be needed if the turning mechanism inside the machine is not working to standard. The spindle pulley works with other devices in or near the engine so that the entire appliance runs smoothly. It is possible that the spindle pulley can become stripped overtime. Be sure the engine is completely shut down before attempting to replace this part. This part is sold individually. Some appliances may require more than one spindle pulley so be sure to purchase the correct amount. This is a genuine OEM replacement part.

This light bulb is designed for use with outdoor lawn and garden power equipment such as lawn mowers, snow blowers, and snow throwers. It is compatible with products made by Craftsman, MTD, Columbia, Husky, Yard-Man, Cub Cadet, White Outdoor, and Troy-Bilt.This light bulb attaches to the light socket in a mower or blower and illuminates the area in front of the machine. The purpose of the light bulb is to make the machine operable even when light is sparse. For example, if someone is mowing their lawn at dusk and it gets too dark to see the yard, they'll need a functioning light bulb to finish the job. This is also an important piece for snow blowers because even if it isn't nighttime, a dense snowfall can greatly limit visibility. A light bulb on the front of the machine can make the task less overwhelming when the environment is dark or if visibility is otherwise limited. To replace a broken bulb, unscrew the bad bulb and screw the new one in. No extensive technical knowledge of the machine is required for a simple light bulb replacement.This light bulb is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by MTD.

A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.

The drive clutch cable is a clutch or engagement cable that tightens the drive belt or lifts the spinning friction disc contained within the drive housing. It will cause contact between the driveshaft and turn the wheels. If the wheels refuse to turn, it may be due to a cable that is damaged, loose, or snapped. If tightening the tension fails to yield results, this OEM replacement cable is needed. Replacing a drive clutch cable is fairly easy. Remove the original and use pliers and a socket set to install and tighten the new one. "This is a drive clutch cable designed for use in snowblowers produced by MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, Yard-Man, and others. It ships individually and is made of rubber, wire, and metal.

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

This is a pawl that can serve as a replacement for some mower models, as well as chippers and shredders. The pawl attaches to the ratchet pawl plate. The pawl is essential for starting the engine. When the starter turns, the pawl is forced outward and locks onto the flywheel, allowing the engine to start. When the starter rope is let go, the springs pull back the ratchet pawls. If there is damage to the pawl, the engine will not start.The piece is made from durable metal, and it is built to last. However, it can start to wear down over time. Additionally, there is the potential that it could corrode. If there are issues with the pawl, replace them as soon as possible to ensure their machine continues to operate properly.This pawl can work with select models from MTD, Troy-Bilt, Yard-Man, Cub Cadet, and Husky. The piece is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.