Craftsman Lawn Mower Parts

Mower won't move or loses speed? This transmission transfers engine power to the wheels and controls torque. Moderate difficulty repair for self-propelled models.

These keys start and operate your lawn tractor's engine through the ignition switch, typically located on the dashboard or control panel. Replace when keys are lost, damaged, or worn to the point where they don't turn smoothly in the ignition.

Mulch plug assembly for gas walk-behind mowers. Blocks the discharge chute to enable mulching mode. Replace if cracked, broken, or missing.

Replace your snowblower's clutch handle assembly if the original is cracked, broken, or worn. This handle installs on the control panel for operator control.

Replace a cracked, worn, or missing snowblower wheel and tire assembly. Installs on the drive axle for smooth mobility during snow removal operations.

This beige wheel cog is a genuine MTD replacement part. A wheel cog is a component of a self-propelled or push lawn mower, chipper shredder, or snow blower. This replacement part is ideal for basic maintenance for home appliances such as lawn mowers, chipper shredders, and snow blowers. These wheel cogs may be subject to damage and natural wear and tear over time. Signs of damage can include grinding or grating noises, shaking steering wheels, and uneven wear on tires that is visible to the naked eye. In cases of damage to multiple wheels on appliances, several replacement wheel cogs will need to be ordered. One will need a small flat-blade screwdriver, a socket wrench, and a dry lubricant such as graphite in order to replace a wheel cog on a lawn mower, chipper shredder, or snow blower. Always wear gloves when working with or repairing outdoor equipment. This genuine MTD wheel cog replacement works with the brands Cub Cadet, MTD, Yard Machines, Huskee, Yard-Man, and Bolens. It is an OEM authorized part manufactured in the US, fitting many MTD models.

Replacement wheel assembly for riding mowers and lawn tractors. Restores mobility when original wheel is cracked, broken, or damaged. Includes tire and rim.

This clutch collar is an authentic OEM part sourced directly from the manufacturer for use in lawnmowers and lawn tractors. If there are problems with the lawnmower jerking and sputtering after changing gears, the clutch collar should be removed and replaced to keep the lawnmower running properly. The clutch collar is part of the clutch bearing. The clutch collar is used between bevel gears as spacers and allows them to move in sync with the pinion gear. If the clutch collar is deteriorated, broken, or missing, a new one should be installed.Make sure the lawnmower is on a flat surface. Remove the spark plug and disconnect the battery. A screwdriver, pliers, socket set, wrench set, and nut driver are required to make this repair. Take the transmission out of the lawnmower. Open the case on the transmission and remove the broken clutch collar. Install the new clutch collar. Reverse the process to reassemble the lawnmower. This clutch collar is a high tensile metal part that is sold individually. It is designed for use in lawn tractors manufactured by Craftsman.

Replace your lawn tractor's headlight lens and grill assembly when cracked, clouded, or damaged to restore visibility and protect the bulb. Verify fit with your model number before ordering.

Oil drain sleeve fastener for lawn tractors and riding mowers. Secures the oil drain system. Replace if cracked, stripped, or missing for proper fit.

Extension spring for lawn tractors and riding mowers. Replaces broken, stretched, or missing springs. Essential hardware for proper assembly and operation.

Replace your damaged or worn 8-inch mower wheel assembly. Installs on the axle to support the deck and allow smooth rolling. Order now for cracked or broken wheels.

Replace your worn or damaged 12-inch mower wheel assembly. Installs on walk-behind models to restore smooth rolling and maneuverability across your lawn.

This is the front wheel assembly that is used by a large number of manufactures as the standard wheel for push mowers. This wheel is a tough, black rubber wheel fitted onto a sturdy white chassis. Since it is not a pneumatic wheel, there is no concern that it will roll over hidden debris and be damaged. Push wheels such as these often last the lifetime of a Lawn Mower. However, there are occasions when the housing of the mower is dropped and the wheel becomes warped or broken. It's also the case that, with constant use, the wheels can lose tread, making them harder to maneuver in tough mowing conditions. It has also been reported that the tires will wear and become smaller in circumference over time, meaning it will require more gasoline to mow the same amount of yard. The front wheels are easily replaced. After removing the plug cap and stabilizing the mower, simply use a socket wrench to remove the center bolt from the wheel. It's a good idea to use a dry lubricant like graphite on the axle before replacing it. This OEM guaranteed replacement part is compatible with Ryobi, Yard Machines, Troy-Bilt, Cub Cadet, Husky, Yard-Man, and MTD push mowers.

Replaces worn, cracked, or damaged 8-inch wheels on walk-behind lawn mowers. Restores smooth rolling and maneuverability for easier operation.