Need Help?
Call or text
Show parts
This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Normally screws are found in many different types of appliances. These parts are important in holding different pieces together so that the user is able to operate the machine effectively. A new screw might be needed if some parts of the appliance are loose or missing from place.Screws can become stripped over time with normal equipment use. If this is the case it is recommended that they be replaced. The repair for this screw is simple and will most likely require common household tools as well as pliers. This screw is made of durable metal made for long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is also a genuine OEM replacement part.
Usually ships within 4 - 14 days
Combustion engines are quite loud by nature, and their sound and emissions are toned down through the use of a muffler system. In small engines, the muffler often attaches directly to the cylinder to capture the gases and reduce noise. Should that connection weaken or loosen, a replacement bolt may need to be installed to ensure a tight seal and optimal engine performance. This replacement muffler bolt is meant to be installed on edgers, blowers, trimmers and pruners from brands like Poulan, Jonesred, Weed Eater and Husqvarna. This is an OEM replacement part and is going to be responsible for fastening the machine's muffler to the cylinder. It will require the proper hex key to install properly and is considered an easy repair frequently required on many small machines.
This genuine muffler is designed to offer a replacement for select lawn and garden equipment engines. The muffler is part of the exhaust system and it is responsible for reducing the noise from the engine as it exhausts out of the unit. Over time, mufflers are known to get clogged, rust, or otherwise wear out and require replacement. If the muffler becomes clogged or damaged, it will need to be replaced in order to operate the equipment safely. This is a genuine OEM replacement muffler that is manufactured to specific standards. It is made by Weed Eater and is compatible with several of their machines, as well as units from Husqvarna and Poulan. The muffler is sold as an individual unit and does not include the hardware required for installation. It is used in select trimmers, pole pruners, edgers, and lawnmowers. To replace the muffler, it will be important to wear gloves and allow the engine to cool completely. Remove the old muffler and replace it with the new unit, securing it into place with the existing hardware. In the event that the hardware also needs to be replaced, it can be purchased separately.
Craftsman manufactures this cylinder head bolt that fastens the cylinder of a small gasoline-powered engine to the engine manifold. There are often two head bolts that secure the cylinder. The placement of the bolts is important as it not only fastens the two engine parts together, but holds the cylinder gasket in place, as well. Among the equipment that uses this type of cylinder head bolt are leaf blowers, power vacuums, grass trimmers, edgers, and hedge trimmers. While it is rare for the bolts to fail, the gasket they hold in place can sometimes wear and allow oil to leak outside the engine manifold or into the combustion chamber. This is revealed by white, oily smoke or an abundance of oil on the equipment. When replacing the head gasket, it is a good idea to replace the cylinder head bolts, as well, as they will have received a good deal of wear, potentially weakening them. These bolts are sold separately, so the user should make sure to purchase the correct number of bolts needed. Before beginning, the user should consult diagrams of the internal engine parts and their order. These bolts are OEM genuine replacement parts, built to match the factory originals.
This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners.Spark plugs in outdoor appliances such as these might have to be replaced if they are not functioning as usual. If the ignition system is not working, if the spark plugs are not igniting in the first place, or if the spark plugs are igniting but the engine is not powering on, it is likely that the spark plugs are damaged and should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: Husqvarna, Stihl, Craftsman, Weed Eater, Toro, Cub Cadet, Ryobi, Homelite, Poulan, Wheel Horse, Tecumseh, Tanaka, Black Max, and Green Machine.
This is a genuine engine cylinder that is designed for use in select outdoor power equipment. The cylinder is the part of the engine that houses the spark plug and piston, creating the combustion chamber that the engine needs to ignite the air-fuel mixture that runs the engine. The cylinder is exposed to high heat, excessive pressure, and chemicals that can all cause wear and breakage over time. In the event that the cylinder goes bad, it needs to be replaced immediately to prevent further engine damage. This OEM cylinder is manufactured by Husqvarna. It can be used in trimmers, blowers, edgers, and pruners from the brand, as well as from Poulan and Weed Eater. The cylinder is sold as an individual unit and does not include hardware or other parts or accessories. Replacing the cylinder takes a little more effort because it requires disassembling the engine. To replace the cylinder, remove the engine shrouds, and then remove the engine from its mount. From here, the cylinder can be removed from the block and the piston can be taken out. Then, the new cylinder can have the piston installed before being bolted into place. The accessories can be replaced and then the engine can be re-mounted.
A piston ring is a component located between a piston and a cylinder and helps the engine operate correctly. This component maintains gas compression between the cylinder wall and piston, makes lubricating oil to prevent scuffing, transfers heat from the crown of the piston to the cylinder, and prevents the piston from hitting the cylinder wall. There are several signs that a piston ring needs to be replaced. Excessive smoke may come out of the engine, oil may be used more rapidly, and your equipment might have a decreased performance without the power it used to have. If the engine is still in good shape, but the rings have lost their tension, replacing the piston ring is the best solution. Inspecting the cylinder for wear is also important since damaged piston rings can lead to cylinder wear. This piston ring is a genuine OEM product directly from the manufacturer. It comes as an individual part. It can be used on hedge trimmer, leaf blowers, and trimmers from Husqvarna, Weed Eater, and Poulan. Several tools, including a screwdriver and wrenches, might be required to install the replacement part.
This wrist pin retainer is an essential component that is used to secure the piston pin in many types of handheld lawn and garden equipment. The pin is made of durable metal, but if it is missing or has become damaged, the part will need to be replaced. A wrench set, screwdriver, and pliers will be needed to make the replacement. To replace the wrist pin retainer, get access to the piston and then take off any keeper rings included. Use tools to tap on the wrist pin retainer to make it come loose and take it out of the equipment. The replacement can be inserted into the same place and the equipment will need to be reassembled.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The wrist pin retainer is designed to be used in trash compactors, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, pole pruners, and carpet cleaners manufactured by Turf King, Craftsman, Paramount, Husqvarna, Broan, Weed Eater, Poulan, and Poulan Pro. The part is sold individually.
Here is a replacement piston kit for use with handheld lawn and garden equipment engines. The pistons in an engine are essential to transfer combustion power to the various working parts of the machine. Pistons might need to be replaced if they have suffered any sort of damage or corrosion. There are several parts to the system including the piston, rings, wristpin, and circlips. The damage or wear and tear could occur in any of these different parts. When replacing a piston, it is a good idea to replace all of the parts of the kit, not just the part that is having issues. This authentic OEM piston kit is compatible with string trimmers, leaf blowers, hedge trimmers, pole pruners, and edgers. It is sold individually and is compatible with Husqvarna, Craftsman, Poulan, Poulan Pro, and Weed Eater brands. Owners buying a piston kit need to be sure they are getting the right part for their make and model.
This carburetor adapter attaches to the gasket on some kinds of lawn equipment with small engines. It is made of a durable plastic material, but wear and tear or impact can cause the part to become damaged. If the part is damaged or broken, the carburetor adapter will need to be replaced with a new component.A visual inspection can determine whether the carburetor adapter should be replaced. The fuel lines and throttle linkage will first need to be removed. Next, the bolts on the carburetor should be taken out so the carburetor can be removed. Take the bolts out of the carburetor plate and remove it. This will give access to the carburetor adapter so it can be determined whether it needs to be replaced. Simply install the new part before reassembling the machine so it can be used again.This replacement carburetor adapter is designed for use with string trimmers and pole pruners manufactured by Craftsman, Poulan, Poulan Pro, and Weed Eater. It is a genuine OEM part that is directly sourced from the manufacturer. This part is sold as an individual component.
This carburetor is an original OEM part sourced directly from the manufacturer, Husqvarna. It is sold individually. A carburetor is designed for use with pieces of outdoor lawn and garden power equipment with small engines such as trimmers and string trimmers. It is compatible with products by brands such as Craftsman, Weed Eater, and Poulan.Having an OEM carburetor is crucial if the time comes to rebuild or replace the machine's carburetor. The purpose of the carburetor is to mix air and fuel in the proper air-to-fuel ratio for internal combustion engines. The replacement or repair process is necessary when the carburetor fails to perform as expected. Any number of symptoms could indicate a faulty carburetor, ranging from poor engine performance to black smoke from the exhaust. Other indicators of a bad carburetor include backfiring, overheating, and hard-starting. When using the carburetor kit to repair or replace the machine's carburetor, be sure to complete the work in a well-ventilated area. It is essential that anyone involved in the rebuild knows to drain any leftover fuel from the tank and fuel lines prior to beginning the rebuild process. It's also important that the repair person or repair team wears proper safety equipment throughout the installation process, such as work gloves to protect the hands.
This carburetor assembly kit is a genuine Husqvarna part, sold individually. This carburetor assembly kit can be used as a replacement part in a string trimmer. The purpose of the carburetor assembly kit in a string trimmer is to provide the operator with all of the components that would be necessary to completely replace a carburetor.The carburetor assembly kit might need to be ordered as a complete replacement part in a carburetor that is exhibiting signs of damage in the form of a hard starting engine, an engine that won't start, or a carburetor that is clicking, crackling, or excessively vibrating during typical operation of the appliance. If this occurs, the carburetor assembly kit should be ordered as a genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This carburetor assembly kit is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.
This part is discontinued by the manufacturer and is no longer available for purchase.
Screws are responsible for holding together various lawn and garden engine components and housing parts. Although it is made of durable metal, the screw can be subject to damage from an incident or impact. It could also become worn or stripped over time, or even lost in the process of other repairs. As a result, a replacement would be necessary, and it should be made as soon as possible. This screw will provide the perfect fit for compatible machines. This genuine OEM replacement screw is manufactured by Husqvarna to exact standards. It can be found in applications on more than 150 machines from Poulan, Husqvarna, Weed Eater, and Jonsered. The screw is used on multiple machines, including hedge trimmers, pruners, blowers, and trimmers. Be sure to check the parts diagram for exact application and location of this screw. The screw is sold individually as a single unit and those who need more than one will have to purchase additional quantities. This screw is made of premium metal and requires a Phillips head screwdriver for replacement.
An air filter contributes to engine and carburetor performance by keeping dirt and dust out. Eventually, it will accumulate too much debris and get clogged. When this happens, tiny particles can enter, damage internal parts, and cause flooding, rough idling, and sputtering. Installing a brand-new air filter foam is easy and requires no tools. Start by opening the air filter cover. Then, take the dirty filter out. Take the new filter and put it inside a plastic bag before pouring a small amount of oil into the bag. Make sure to coat it evenly. Then, take the new filter out, put it on the rag, and remove the excess oil. Put the oiled foam air filter to the housing and close the air filter door. This air filter replacement is a 100% genuine Husqvarna product. It is directly sourced from the Husqvarna. It works with string trimmers, pole pruners, and leaf blowers from Paramount, Weed Eater, Husqvarna, Craftsman, Poulan, and Turf King. This air filter replacement is made from foam and comes unoiled. This fuel tank replacement is sold individually. Other fuel tank parts are not included.
This air box cover is made to fit over the air filter on a string trimmer or pole pruner. It's a durable component made of hard plastic that fully covers the air filter to prevent dirt and debris from reaching the internal parts. It also offers some protection to the carburetor. After extensive use, the air box cover can become damaged. This can occur due to regular wear and tear or from being knocked against other items during use. If the box is cracked or broken, it will need to be replaced.Check the surface of the air box cover for gouges, scratches, and holes. The cover also may come loose after time. If these things are occurring, the air box cover will need to be replaced. If the part is damaged, it can be removed without using any tools. Snap off the current cover and the replacement part will snap on in its place. This air box cover is a genuine OEM replacement component that is directly sourced from the manufacturer. It comes as an individual item. The part is compatible with Craftsman, Poulan, and Poulan Pro pole pruners and string trimmers.
An ignition module works in conjunction with the flywheel to create an electric current. It sends the voltage to the spark plug at a precise time to ignite the fuel and air mixture in the cylinder. An ignition module does not have moving components, but exposure to heat can cause damage over time. There are several warning signs that the ignition module has failed. The most common ignition module related problem is engine sputtering. If the damage is severe, it may cause total engine start failure. This is an original Husqvarna ignition module replacement. This part is compatible with string trimmers, pole pruners, hedge trimmers, and leaf blowers from Craftsman, Poulan Pro, Weed Eater, and Poulan. It is sold individually. Other components are not included in this ignition module replacement.
These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.
This replacement part is a lead wire. This is a genuine replacement part made by Husqvarna. This wire is used in different machinery and allows the entire engine to operate smoothly and efficiently. A new lead wire might be needed if the current one is missing or damaged in anyway. It is not uncommon for any type of wire to become stripped down over time and not work as well. If this is the case, be sure to replace this part as soon as possible. Turn the engine off before beginning this repair. Work gloves are always recommended while working with wires to ensure safety to the user. This lead wire is a genuine OEM replacement part to ensure proper fit and long-lasting use. This part is sold individually and is sourced directly from the manufacturer.
This replacement part is a switch kit and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is usually found in line trimmers and edgers. This switch allows the user to control certain settings on the machine such as powering it off and on.A new switch kit might be needed if the current one is damaged or missing. If the switch kit is missing the user might not be able to utilize all the functions of the appliance or machine. Be sure the engine is powered off completely and cooled down before replacing this part. Refer to the correct owner's manual for more directions on how to replace this part. This is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure a proper fit. This part is sold individually.
This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.
This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.
This part is a replacement recoil starter pulley. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken recoil starter pulley in leaf blowers.The recoil starter assembly is essential for starting up the engine as it spins the flywheel in order to get the engine to power on. If this part is faulty, the engine may have trouble starting or may not start at all. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular recoil starter pulley, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This recoil starter pulley can be used with a variety of leaf blower models manufactured by Husqvarna, Poulan, and other brands.
This fan baffle is a genuine Husqvarna part, sold individually. This fan baffle can be used as a replacement part in a string trimmer or a pole pruner. The fan baffle in a string trimmer or a pole pruner might have to be completely replaced if the fan baffle can no longer serve its typical function. This could occur if the fan baffle suffers damage for which a repair cannot be conducted. If this occurs, the fan baffle should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual or handbook. It is a simple replacement process that will only require simple tools to conduct. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fan baffle is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.
The flywheel is a heavy metal wheel that connects to the rotating shaft. Its purpose is to help regulate how power is delivered from the motor to the rest of the tool. Its weight and inertia oppose and moderate small changes in the speed of the engine and holds onto that energy for use when needed. The most common problem with flywheels is for them to crack. As the engine begins to age and other parts begin to break down, excess vibration in the engine can cause the flywheel to wear down, grate, and even shatter. The flywheel needs replacing when the motor begins slipping into the wrong gear. The exact steps for replacing the flywheel will depend on the specific model being repaired. It should only require a screwdriver. This is a genuine OEM replacement flywheel assembly for gardening hand tools like leaf blowers, edgers, weed eaters, and hedge trimmers made by Craftsman, Husqvarna, Weed Eater, Poulan, Poulan Pro, Paramount, Turf King. This part ships individually.
This replacement part is a retaining ring. This is a genuine replacement part made by Husqvarna. This part acts as a fastener and is used to hold certain components together. This ensures that the machine is working efficiently during use. A new retaining ring might be needed if the current one is visibly damaged or is no longer able to stay attached to the machine. If the ring has become stripped over time, it might be best to replace it so that the appliance can return to working order. This should be a simple repair and only require common household tools such as screwdrivers or pliers. Refer to the owner's manual for more information on how to repair this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.
This is a genuine outer bearing replacement for use on select models of outdoor lawn and garden equipment. The outer bearing is installed on the crankshaft and helps create a flexible joint for the various components to move against. This bearing is made of durable metal material, but over time it can become worn and damaged. It may also come loose or get lost in the process of other repairs. In any case, a faulty bearing will need an immediate and original replacement. Wear gloves and allow the engine to cool completely before beginning any repairs. Be sure to take the crankshaft components apart carefully to access the bearing so that they can be reassembled properly. Bearings should also be lubricated when installed.This is an OEM part that is manufactured to exact standards. It is made by Craftsman and can be used in machines from Weed Eater, Poulan, and Craftsman. This bearing can be used in compatible blowers, edgers, trimmers, pruners, and hedge trimmers. It is sold as an individual unit and there is no additional hardware included.
A crankcase seal is what prevents the oil from leaking between the crankcase opening and the crankshaft. It is often found on the engine's front or underside and seals the timing cover to the crankshaft. Oil seals may become damaged or worn with use. Bearing seizures and grinding indicate that the crankcase seal should be replaced. If there is oil leaking from the crankcase or on the crankshaft, a replacement crankcase seal is necessary.Wear gloves and be sure to collect all the tools needed prior to starting a replacement. Replacing a crankcase seal requires Torx wrenches, a container for fuel, spark plug socket or wrench, adjustable or 10-millimeter wrench, rubber mallet, long-nosed pliers, screwdriver, adjustable pliers, socket set, starter rope, 2-cycle engine oil, ignition gapping gauge, and a razor blade. Follow the operator manual for specific directions.The crankcase seal is a genuine OEM part. It is sold individually. The crankcase seal is black, round, and made from durable, high-quality plastic and metal for extensive use. It can be used in a variety of lawn equipment, including leaf blowers, trimmers, hedge trimmers, and vacuums. It is compatible with various manufacturers, including Craftsman, Husqvarna, Weed Eater, RedMax, and Poulan Pro.
This bearing is a genuine Husqvarna part, sold individually. A bearing can be used as a replacement part for outdoor appliances including string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners. The purpose of this genuine OEM part is to facilitate the rotation of one or more components within one of these outdoor appliances.If the bearing has been punctured, dented, cracked, warped, or eroded, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bearing is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, Paramount, and Turf King.
This is a connecting rod assembly used in many types of lawn and garden equipment. It is made of durable metal and connects the engine crankshaft to the piston. The connection rod assembly is also tasked with transferring power to the crankshaft from the piston. This is an important component that is required for the proper functioning of an internal combustion engine.If the connecting rod assembly has gone bad, it can cause knocking sounds from the engine, low oil flow and pressure, and excessive oil consumption. In some cases, a broken connecting rod assembly will also result in an overheating engine. If the connecting rod assembly has gone bad, a wrench and screwdriver will be needed to replace it. Make sure to wear work gloves, disconnect the spark plug wire, and let the engine cool before working on the part.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The connecting rod assembly is designed for use with string trimmers, hedge trimmers, leaf blowers, edgers, and pole prunes manufactured by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.
This is an OEM replacement screw that is specifically designed to secure the fuel tank on select lawn and garden equipment. The fuel tank retainer screw is made of durable metal and will be screwed to the fuel tank and the body of the machine, holding the tank in place and preventing it from being exposed to excessive vibrations or potential spillage. These screws can become worn over time or be lost in the process of other repairs. This genuine OEM fuel tank retainer screw is compatible with hundreds of trimmers, blowers, edgers, and pruners. It can be used with select models of machines from Poulan, Husqvarna, Weed Eater, and Jonsered. Owners should check their parts diagram for exact placement and part number compatibility as fuel tank retainer screws come in different lengths and diameters, so they are model-specific. This screw is made of durable metal and will require a Torx driver to install. The fuel tank retainer screw includes a built-in washer and is sold as an individual unit. Those who need more than one will have to purchase multiple quantities.
The fuel system on a trimmer is contained within the fuel tank assembly and will include the fuel lines, fuel cap, and the fuel filter. It is a typical and essential system on any gas-powered trimmer. Although it might seem that a fuel system is a universal thing, there are specific styles that work with specific models. Though they are crafted of durable materials, with time and the vibrations, heat, and wear and tear put on them, they can require replacement. They can also be damaged by dropping or striking the trimmer and necessitate a replacement. It will require a star or Torx screwdriver for the replacement process. The damaged assembly will have to be removed, and any seals or lines checked for damage or leaks, and then the new assembly can be installed easily. This authentic OEM fuel tank assembly is designed to include the fuel tank, a cap, and the fuel line. It is made of durable and long-lasting materials and will offer a long period of reliable performance when installed properly. This fuel tank assembly works on string trimmers as well as pole pruners made by Craftsman, Poulan, Poulan Pro, and Weed Eater, as well as Husqvarna.
This is a 25-inch long fuel line for use with various outdoor power tools and equipment that include small engines. Known as a fuel hose, fuel tube, or pick-up tube, the fuel line delivers fuel from the tank to the carburetor. It is made of flexible translucent plastic to prevent splitting and kinking. Over time, the fuel line can become brittle, cracked, or clogged. When a crack or clog develops, fuel can leak out and make it difficult to start the engine. A leak can cause damage to the motor and the equipment, create performance issues, and even become a safety hazard because of the flammability of the fuel. Replacing a worn-out or cracked fuel line is easy and takes 30 to 60 minutes to complete. Disconnect the old fuel line from the carburetor and the fuel grommet, then replace it with the new line. This replacement part works with different outdoor power tools like the chainsaw, edger, hedge trimmer, leaf blower/vacuum, pole pruner, and pole saw. It is compatible with popular brands like Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater. It is an OEM replacement part sourced directly from the manufacturer and is sold individually.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
This gasket replacement kit is for use with several types of handheld lawn and garden tools to help ensure there are no leaks of air or oil in the engine. They are an important part of the engine and help it continue to run efficiently. Over time, the gaskets will start to wear down. They might become brittle and start to crack. In some cases, they may no longer sit properly and could allow for leaks. If an owner notices an engine running roughly or leaking oil, the problem could be with the gaskets. They will need to be replaced. This replacement gasket kit is a genuine OEM selection. It includes the major gaskets and O-rings that need to be replaced when the owner is rebuilding an engine. These gaskets will work with trimmers and pole pruners. The compatible brands include Craftsman, Weed Eater, Poulan, Poulan Pro, and Husqvarna. Buyers should always double-check to ensure the gasket kit is compatible with their make and model.