Parts for Lg WM4500HBA/00: Drawer Panel Assy Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Washer won't drain or complete cycles? This drain pump assembly removes water from the tub during drain and spin cycles. Restores proper draining function.

Drum bearing bushing for washers. Installs between drum and bearing assembly. Replace if cracked, worn, or missing to restore proper drum support.

Shipping bolt assembly secures the washer drum during transport. Replace if bolts are lost, damaged, or missing before moving your washer to prevent damage.

Secures washer drum during moving or transport. Immobilizes internal components to prevent damage. Replace if missing, lost, or needed for relocation.

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

Top plate assembly for washer control panel area. Replaces cracked, broken, or missing top plates. Structural component that covers the top section.

Fix an unresponsive or blank washer display with this control board assembly. Restores user interface functions and control panel operation.

The PCB Assembly is an OEM part for LG refrigerators. It stands for Printed Circuit Board, which is the main control board that manages and regulates various functions and components within the refrigerator.

Symptoms of a bad PCB Assembly include:

• The refrigerator not powering on or displaying any lights/indicators
• Specific components or features not functioning correctly (ice maker, dispenser, cooling, etc.)
• Error codes or warning lights illuminated on the control panel
• Strange noises or abnormal behavior from the refrigerator

Causes of a bad PCB Assembly can be related to electrical faults, such as short circuits, power surges, or component failures. Physical damage from impact, moisture exposure, or overheating can also contribute to the malfunction of the PCB.

This OEM LG part is also compatible with Sears/Kenmore refrigerators. 

Mounts the door hinge to your washer's front cabinet. Replace if bracket is bent, broken, or missing to restore proper door alignment and sealing.

Washer won't spin or makes grinding noises? The motor rotor bolt secures the rotor to the motor shaft. Requires a 17mm socket for installation.

This cabinet cover is a direct-fit exterior panel that restores the appliance's appearance and protects internal components from dust and debris. Replaces a damaged or missing outer panel to maintain proper airflow and finish. What it does:

• Covers and protects the appliance's internal cabinet area from dust, spills, and physical damage
• Helps maintain correct airflow paths and spacing around internal components
• Restores the appliance's exterior look when the original panel is dented, cracked, or missing
• Reduces risk of loose debris contacting wiring or controls

• One cabinet cover (outer cabinet panel) as specified

• Follow the appliance manufacturer's instructions; disconnect power before servicing
• May require removal of exterior trim or adjacent panels for access
• Use appropriate fasteners and avoid over-tightening to prevent panel distortion

Secures the outer door boot seal to prevent water leaks. Replace if damaged, rusted, or losing tension. Includes tensioning spring. Verify fit.

Balance weight for front-load washers. Mounts to the drum assembly to stabilize spin cycles. Replace if cracked, broken, or detached from the tub.

Fix washer electrical failures with this multi-connector wiring harness. Restores power connections when controls fail or components stop responding.

Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.

Fix washer electrical failures with this wire harness. Restores power and signal routing between control boards and components. Direct fit replacement.

Door hinge assembly for washer machines. Mounts the door to the frame and allows smooth opening and closing. Replace when hinge is cracked or worn.

This internal inlet hose directs incoming water into the appliance's fill system. Replacing a cracked or leaking hose restores proper water flow during cycles and helps prevent water damage around the unit. What it does:

• Routes water from the supply or inlet valve into the unit during fill
• Maintains a sealed path to help prevent drips and leaks when clamped correctly
• Common failure symptoms: water on the floor, slow or no fill, visible cracks/bulges/kinks, or dripping at hose connections
• Restores consistent water delivery to the dispenser, tub, or reservoir

• 1 inlet hose

• Disconnect power and shut off the water supply before servicing
• Place a towel or pan to catch residual water; relieve line pressure
• Note hose routing and transfer any reusable clamps/fittings from the original
• Secure all connections, restore water/power, and run a test cycle to check for leaks

Fix no hot water, slow filling, or screaming noise during fill. This washer water inlet valve controls water flow into the tub. Moderate DIY repair.

Fix a washer that won't fill, fills slowly, or leaks during fill cycles. This water inlet valve assembly controls incoming water flow to your washer.

The Float Assembly is an OEM part for LG washing machines. This part monitors and controls the water level within the appliance. It's a safety feature that prevents water overflow and potential flooding, contributing to the efficient operation of the washing machine by maintaining the correct water level for each cycle.

Causes of a bad Float Assembly can vary from simple blockages that prevent the float from moving freely to electrical faults within the switch mechanism. 

Symptoms of a bad Float Assembly include:

• Water overflowing from the washing machine
• Inadequate water levels that affect the washing cycle's effectiveness
• The washing machine failing to start the fill cycle due to a malfunctioning float switch

This OEM LG part is also compatible with some Kenmore models.

Mounts to the washer's lower frame to secure components and maintain alignment. Replace if bracket is cracked, broken, rusted, or missing hardware.

The Knob Assembly is an OEM part for LG dryers. The assembly includes the knob used to operate cycles and settings on the dryer control panel. 

Symptoms of a bad knob assembly include:

• Knobs falling off or detaching from the control panel
• Difficulty selecting cycles or temperatures  
• Inability to activate or adjust timer settings
• Loose, wobbly, or improperly functioning knobs

Causes of a bad knob assembly can be general wear over time, excessive heat exposure damaging internal mechanisms, or accidental impact or damage.

Replace yours today with this genuine OEM LG knob assembly to restore full and reliable dryer operation. This replacement part is also compatible with Kenmore and some Samsung dryer models.

Leveling leg assembly for washers and laundry centers. Installs at the base to support and level the unit. Replace if cracked, broken, or missing.

Fix hard water spots and mineral buildup with a new softener tank assembly. Restores proper water treatment when the original tank leaks or fails.

Washer case housing component. Replaces cracked, damaged, or missing case parts. Essential structural element for proper appliance assembly.

This drain hose cap seals and secures the refrigerator defrost drain outlet so meltwater is directed into the drain hose instead of pooling in the cabinet. Replaces a worn or damaged cap to help stop interior leaks and water buildup. What it does:

• Seals the defrost drain outlet to prevent water from spilling into drawers or onto shelves.
• Guides defrost/meltwater into the drain hose and toward the drain pan.
• Helps reduce odors and pests entering through an open drain opening.
• Fits onto the drain outlet to replace cracked, missing, or loose caps.

• Disconnect power before working inside the refrigerator to avoid electrical hazard.
• Remove shelves and drawers as needed to access the drain outlet; clear any visible debris or ice first.
• Press the cap firmly onto the drain outlet/hose until fully seated; avoid excessive force or prying tools.
• After installation, pour a small amount of warm water down the drain to confirm proper flow and seating.

Connects detergent dispenser to washer tub. Replace if cracked, leaking, or clogged with detergent buildup. Verify fit with your model number.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

The Vent Hose is an OEM part for LG washing machines. This hose is essential for ensuring proper ventilation within the washer, allowing air to circulate and preventing the buildup of moisture and mildew. It helps maintain the efficiency of the washing machine by facilitating the expulsion of air and excess water vapor during operation.

Causes of a bad washer vent hose can include wear and tear over time, blockages from lint or debris, or damage due to bending or pinching.

Symptoms of a bad vent hose include:

• Excessive moisture or condensation inside the washer
• Musty odors from the washing machine
• Visible cracks or holes in the hose
• Poor ventilation leading to inefficient washing cycles

This OEM LG part is also compatible with Sears/Kenmore.

Includes sensor probe

This inlet hose connects the home's water supply to the appliance, providing a reliable path for water to enter the unit so it can fill and operate properly. Replaces a worn, cracked, or leaking inlet hose to restore proper water flow. What it does:

• Carries incoming water from the household supply to the appliance's fill valve
• Helps the washer/dishwasher fill to the correct level for normal operation
• Commonly replaced when you see water leaks, visible cracking, or reduced fill
• Can prevent water damage and restore normal fill performance when failed

• Shut off the water supply and unplug the appliance before beginning any work
• Inspect and replace any damaged O-rings or seals; hand-tighten fittings and avoid over-tightening
• After installation, turn the water back on and check all connections for leaks during a test fill

Replace your washer's hose connector if it's cracked, leaking, or broken. This connector secures water supply hoses to your washing machine inlet valves.

This hose connector attaches the appliance to the household water line, providing a secure path for water flow. It replaces a cracked, leaking or worn connector to stop drips and restore proper water delivery. What it does

• Connects the appliance water hose to the inlet fitting or supply line
• Restores a sealed water path when an old connector is cracked, split or leaking
• Prevents water loss and reduces risk of water damage from failed fittings
• Works with the appliance's existing hose and inlet fittings to re-establish proper flow

• One hose connector piece

• Turn off the appliance and shut off the water supply before replacing the connector
• Drain residual water from the hose and inlet to reduce spillage during service
• Hand-start threads, then tighten securely; avoid over-tightening metal fittings to prevent damage
• Inspect for leaks after restoring water and power; re-check fittings or replace adjoining hose

Washer won't spin or agitate? This drive motor assembly restores drum rotation and completes wash cycles. Moderate DIY repair with basic tools.

Washer won't spin or agitate? The stator assembly generates the electromagnetic field that powers drum rotation. Moderately difficult repair.

Wire harness assembly for washers. Connects electrical components throughout the machine. Replace if wires are frayed, connectors damaged, or harness is broken.

Fix LE error codes or grinding noises during spin with this washer rotor assembly. Pairs with stator to drive drum rotation. DIY repair in 30 minutes.

Direct-replacement door hinge spring that provides proper tension for smooth door operation. Needed when the door sags, closes unevenly, or the spring is worn or broken.

Washer won't fill properly or overfills? The pressure switch monitors water levels and signals when to stop filling. Moderately easy DIY repair.

The Holder is an OEM part for LG front-loading washing machines. It is a plastic mounting bracket or suspension system that attaches to the rear of the washer tub and helps secure internal components like hoses, pulleys, and the rear bearing in place during spin cycles. Subject to force and vibration, the holder must withstand years of washing use.

Symptoms of a bad holder include: 

• Loosening or detaching internal parts leading to noise and imbalance
• Cracking or damage of the plastic bracketry 
• Bearing or tub damage from improperly secured components

Causes can be fatigue from repeated wash cycles, stress cracks from heavy loads, or material deterioration over time. Replace with this OEM LG holder to maintain drum balance and suspend components securely. It is also compatible with Sears/Kenmore front-load washers.

Appliance won't power on? This power cord assembly restores electrical connection when the cord is damaged or has poor contact. Direct plug-in repair.

If your washer won't drain or leaks water during cycles, the drain hose assembly may need replacement. This hose carries water from the tub to your drain.

Pivot hanger assembly that supports and stabilizes washer components. Replace if worn, damaged, or causing misalignment to restore smooth movement.

This sensor assembly detects vibration and out-of-balance conditions during the washer's spin cycle. It mounts to the washer's tub or frame and sends signals to the control board to adjust spin speed or pause the cycle when excessive vibration is detected. Replace this sensor if the washer frequently stops mid-spin, displays an out-of-balance error code, or fails to reach full spin speed even with a properly balanced load.

Fix a washer that won't start, won't respond to controls, or has a blank display. This main power control board restores electronic functions. Moderate DIY.

Secures hose connections to prevent leaks in your washer. Replace if corroded, rusted, or leaking around hose fittings. Confirm fit by model number.

The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.

Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.

Symptoms of a bad clamp include:

• Water leaking from hose connections
• Hoses coming loose or detaching during operation
• Visible rust or damage on the clamp
• Poor water flow or pressure issues

This OEM LG part is also compatible with Sears/Kenmore models.

Secures washer hoses to pumps, tubs, and drain fittings to prevent leaks. Replace when weakened, rusty, or damaged to maintain tight connections.

Fix washer leaks with this hose clamp. Secures hoses to pumps and valves, preventing water leaks and disconnections during wash cycles. Simple repair.

The NOISE FILTER ASSEMBLY is an OEM part for LG washing machines. It is a component designed to minimize vibrations and reduce noise emanating from the washer during operation. Proper noise damping is important for smooth functionality without disturbance.

Causes of a bad noise filter assembly can include cracks or tears developing over extended use. Physical damage from impact could also compromise its noise-blocking abilities. 

Symptoms of a bad noise filter assembly include:

• Loud banging or clanking noises during wash and spin cycles
• Excessive vibrations felt through the washer cabinetry 
• Increased stress on other components from inadequate dampening
• Premature wear of suspension components like legs and runners

Replace yours today with this genuine OEM LG part to restore a quiet wash experience. This replacement assembly ensures optimum vibration control. It is also compatible with Sears/Kenmore models.

Replace your washer door gasket if you notice leaks, mold buildup, or tears. Ensures a watertight seal during wash cycles. Verify fit with your model.

Fix washer leaks or weak water spray with this connector nozzle. Channels water between internal components when worn nozzles cause drips or poor flow.

Fix water leaking from your washer dispenser or misdirected flow with this dispenser water guide channel. Routes water properly to prevent splashing.

Pressure sensor air chamber for washers. Connects the tub to the water level switch. Replace if cracked, clogged with detergent residue, or leaking air.

Secures rubber hoses to fittings with constant spring tension to prevent leaks. Replace when rusted or weakened to maintain a tight seal. Confirm fit.

Fix excessive vibration, banging during spin, or washer walking across floor. This damper assembly controls drum movement. Moderate DIY repair.

The Hinge Pin is an OEM part for LG washing machines. It serves as a pivot point for the washer door, allowing it to open and close smoothly. This component is crucial for maintaining the proper alignment and function of the washer door, ensuring a secure and reliable seal during operation.

Common causes of a bad hinge pin include frequent use leading to wear and tear, physical damage from accidental impacts, or rust and corrosion over time. A compromised hinge pin can result in misalignment of the door, affecting the washing machine's ability to close properly and maintain an effective seal.

Symptoms of a bad hinge pin include:

• Difficulty opening or closing the washer door
• Door not staying securely closed during operation
• Squeaking or grinding noises when the door is moved
• Visible wear or damage to the hinge pin

This OEM LG part is also compatible with Sears/Kenmore models.

Connector nozzle creates a secure seal between hoses or tubing in your washer. Replace when you notice leaks or loose connections. Confirm fit with your model.

Fix a washer that won't drain or has standing water with this drain pump motor assembly. Powers the pump to remove water during drain cycles.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.