Need Help?
Call
Plastic Shield Kit Assembly / Blade Guard
Usually ships within 4 - 14 days
Many gas-powered small engines require the use of a pull cord to get the engine going. Rather than a starter, it is the pull of the cord that causes the engine to turn over and combustion to begin inside of the engine. These pull mechanisms often use a damper spring on the starter assembly. It exists to "pre-load" a recoil or pull starter with a lot of tension. When it malfunctions, it will take a tremendous amount of effort to get the engine going. This replacement damper spring is designed for a long list of Shindaiwa and Echo machines. These include trimmers, blowers, edgers, and more. This OEM replacement part is shipped individually and made of durable metal for years of service.
Here is a replacement intake gasket that can be used with a range of different types of lawn and garden equipment. The gasket is used as a means to provide an airtight seal between the insulator and carburetor. The gasket could become damaged due to heat from the engine, as well as through normal degradation over the seasons. The gasket may need to be replaced if the owner notices issues with the way the engine is running. Having too much air get into the carburetor will cause issues with the fuel-air mix. If there are misfires, less power, or if it is difficult to start the engine, it could be due to the gasket. If there are cracks of other issues, owners will want to replace the intake gasket right away. This gasket is an OEM part for Echo brand machines and is sold individually. It is for use with equipment such as string trimmers, edgers, hedge trimmers, and pole pruners.
This fuel gasket provides a seal for the gas cap. It prevents any leakage of gas into other chambers of the machine.It is very normal for a fuel gasket to undergo regular wear and tear over time and with exposure to the elements. When it comes time to be repaired or replaced, the fuel gasket will appear brittle or compressed. To replace a fuel gasket, the user simply has to remove the old one and insert the new fuel gasket inside of the machine's fuel cap. This fuel gasket is made out of composite material.This fuel gasket is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. A fuel gasket is essential in the proper operating of many outdoor lawn and garden machines, including but not limited to trimmers, brush cutters, engine sprayers, power brooms, leaf blowers and vacuums, hedge trimmers, and string trimmers. It designed for use to be compatible with products manufactured by the Shindaiwa and Echo brands.
This spring is a genuine Echo part, sold individually. This spring can be used as a replacement part for string trimmers. In a string trimmer, the function of the spring is to maintain the placement of the components to which it is linked through the use of spring tension. Damage to a spring can be very dangerous for appliances due to the amount of tension that springs are placed under. If there is damage to a spring that loosens its tension, it should immediately be removed and replaced by this genuine OEM replacement part before using the string trimmer again. This damage can come in the form of general wear and tear from exposure or aging, or as a result of a collision with a falling or a hard object that can warp the spring beyond functionality. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This spring is compatible with the following outdoor appliance brands: Echo and Shindaiwa.
Drum lid (head cap) for string trimmers and brush cutters. Houses and protects the cutting string spool. Replace if cracked, broken, or missing.
Black plastic bump knob that covers the end of the trimmer spool. Triggers string release when tapped on the ground. Replace if cracked, broken, or missing.
This is a rope guide that is used with various types of lawn and garden equipment. It connects the rope handle and the starter rope. It helps prevent damage to either of the ropes by covering them in durable plastic material. Over time or through use, the rope guide can become damaged or break. If this happens, the part will need to be replaced. First, put the equipment on a flat surface. Drain the fuel from the tool and disconnect the spark plug wire. Next, the starter will need to be removed from the tool to gain access to the rope guide. The rope guide and any other damaged components, such as the string and springs, can be removed from the tool before adding a replacement component. This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual part. The rope guide is compatible with string trimmers, leaf blowers, hedge trimmers, and pole pruners manufactured by Little Wonder, Echo, and Shindaiwa.
The genuine replacement air filter is made of foam and catches dust and debris from the air as it enters the engine on select lawn and garden equipment. Over time, filters will become clogged with regular use, which makes replacing them a part of routine maintenance on most engines. The air filter may also become clogged intermittently or due to excessive dust buildup between maintenance schedules, so it may be helpful to keep an extra filter on hand for emergency replacements. These filters cannot be cleaned and must be replaced when they become clogged. This genuine OEM filter is manufactured to exact standards by Husqvarna and is designed for use with hundreds of machines from Jonsered and Husqvarna, including blowers, trimmers, edgers, hedge trimmers, and saws. Replacing the air filter does not require any tools. Allow the engine to cool and simply remove the filter cover, take out the old filter, and replace the new filter. Then replace the cover. Always wear gloves when performing engine work. This filter is sold as a single unit and does not include the air filter cover or base assembly.
This OEM starter assembly is necessary for starting the handheld lawn and garden equipment. The starter assembly includes an orange plastic cover/housing and a black pull handle that's attached to a starter pulley assembly with a white pull rope. Please note that the fasteners to attach this to the machine are not included with this starter assembly part and must be ordered separately.A new starter assembly may be needed if the cover/housing is broken, the pull handle is broken, the rope is broken, or if any part of the pulley system is broken. If the rope does not retract, this is another sign that a new starter assembly is needed.This is a genuine Husqvarna part sourced directly from the manufacturer and sold individually. This part is compatible with outdoor power equipment manufactured by Husqvarna including edgers, hedge trimmers, pole saws, saws, and grass trimmers.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.