Electrolux Dishwasher Hose Or Tube

This dishwasher hose routes water between internal components to support proper wash and drain performance. Replacing a cracked or leaking hose helps prevent water damage and restores reliable water flow inside the machine. What it does:

• Carries water between internal components during wash and drain cycles
• Helps maintain a watertight path to prevent leaks inside the cabinet
• A damaged hose can lead to puddles under the unit, water in the base pan, or reduced wash/drain performance
• Visible splits, pinholes, soft spots, or kinks are signs the hose needs replacement

• 1 hose

• Disconnect power and turn off the water supply before servicing
• Pull the dishwasher forward for access and place towels to catch residual water
• Transfer/reuse existing clamps or replace if worn; ensure secure, leak-free connections
• Route the hose without kinks and run a short test cycle to check for leaks

This flexible replacement hose routes water between appliance components to restore proper water flow and prevent leaks. It's a direct-fit service part when the original hose is cracked, split, or clogged. What it does:

• Carries water safely between the pump, valve, tank or dispenser as designed
• Restores proper drainage or water delivery when the original hose is leaking or collapsed
• Prevents water damage by replacing worn, brittle, or pinched tubing
• Helps eliminate noises and poor performance caused by restricted flow

• One replacement flexible hose

• Disconnect power and shut off the water supply before beginning any work
• Use appropriate clamps or fittings; tighten to manufacturer torque recommendations without over-tightening
• Inspect connections and run a water test after installation to check for leaks

This replacement refrigerator water supply hose routes water between the house line, valve and dispenser/ice system to restore reliable water flow and prevent leaks. It's a direct-fit service part when the original hose is damaged or leaking. What it does:

• Carries water from the inlet/valve to the dispenser or ice-making components
• Stops leaks and drips caused by cracked, pinched, or deteriorated tubing
• Restores steady water flow for filling ice makers or dispensing water
• Helps eliminate pooling or low-flow symptoms at the dispenser/ice maker

• Turn off the refrigerator and shut off the home water supply before installing
• Inspect fittings and seals; replace clamps or gaskets if worn to ensure a watertight connection
• Tighten connections securely but avoid overtightening plastic fittings

This tubing is a replacement water supply tube that delivers water to the ice maker or dispenser. It restores water flow and helps stop leaks from old, cracked, or kinked tubing. What it does:

• Carries water from the household supply to the ice maker or dispenser
• Restores proper water flow when original tubing is cracked, split, or clogged
• Helps stop visible leaks and reduces the risk of water damage from failed tubing
• Compatible with appliance plumbing fittings where this OEM tubing is used

• One replacement tubing piece as specified by the OEM part number

• Turn off the appliance power and shut off the water supply before replacing tubing
• Inspect fittings and clamps; use the correct-size compression fittings or push-fit connectors
• Trim tubing squarely and fully seat into connectors to prevent leaks

This replacement drain hose routes condensation and defrost water away from the refrigerator to the drain system, helping prevent leaks and pooling that can cause odors or floor damage. What it does:

• Carries condensate/defrost water from the evaporator area to the drain pan or drain outlet
• Helps prevent water buildup and related odors under or behind the appliance
• Restores a worn, cracked or collapsed hose that can cause leaks
• Re-establishes proper water flow when the original hose is clogged or damaged

• One replacement drain hose

• Inspect routing and clamps on removal; replace clamps if worn or corroded
• Ensure hose is seated and clamped securely at both ends to prevent leaks
• Unplug power or disconnect appliance from power before servicing

This is dishwashers circulation pump inlet connector. This part is what is responsible for transporting the water through the inlet. This is a component of the water circulation system of dishwashers. A new dishwasher circulation pump inlet connector may be needed if the part is physically cracked, broken, or damaged in any way. If there are problems with the dishwasher circulation pump, the dishes may not get as clean as they should. If any of these components get clogged, it will affect the operation of the unit. Be sure to unplug any electronic appliance prior to performing any care or maintenance on the unit or before replacing any parts.This is a genuine Frigidaire part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific dishwasher circulation pump inlet connector is compatible with dishwashers that are manufactured by Frigidaire, Kenmore, and Electrolux.