Electrolux Dishwasher Gasket & Seal

The Gasket is an OEM part for Frigidaire dishwashers. This gasket, also known as a door seal, is designed to form a watertight seal around the dishwasher door, preventing leaks during the wash and rinse cycles.

Causes of a bad gasket can include wear and tear from regular use, exposure to high temperatures and detergent chemicals, and damage from sharp objects or improper loading of dishes. Over time, the gasket material can degrade, losing its elasticity and sealing effectiveness.

Symptoms of a bad gasket include:

• Water leaking from the bottom or sides of the dishwasher door
• Visible cracks, tears, or deformation in the gasket
• The dishwasher door not closing properly or sealing tightly
• Moisture or mold buildup around the door seal area

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement seal restores a tight barrier between mating parts in your appliance, helping contain air, moisture, or fluid so the unit operates efficiently and reliably over time.

• Provides a compressible barrier between components to prevent escaping air or liquids
• Helps maintain proper performance when the original seal is worn or deformed
• Common symptoms include poor sealing, seepage around a joint, or visible cracks/flattening
• Replace if cut, brittle, misshapen, or no longer seats securely

• Disconnect power; shut off water or gas supply before servicing
• Note the seal's orientation and seating depth before removal
• Clean mating surfaces and grooves; avoid sharp tools that could damage the new seal
• Seat the new seal evenly all the way around; reassemble and test for a proper seal

This O-ring seals the turbidity sensor assembly to help keep water contained and the sensor functioning properly. It's a small replacement seal for maintaining a watertight sensor connection and reliable turbidity readings. What it does:

• Seals the turbidity (water clarity) sensor housing to prevent leaks into the sensor area
• Helps maintain correct sensor operation so the control can monitor wash water clarity
• Restores a proper seal after sensor removal or repair

• Always disconnect power to the appliance before starting any repair.
• Remove the sensor assembly per manufacturer instructions; replace the old O-ring with the new one, ensuring it seats evenly in the groove.
• Inspect mating surfaces for nicks, debris, or old sealant and clean before installing the new O-ring.
• Use an appliance-safe lubricant compatible with rubber O-rings; avoid petroleum-based products unless specified.

This flexible door gasket replaces a worn refrigerator seal to help maintain a tight fridge/freezer seal and improve temperature stability. It restores proper door sealing to reduce energy loss and help prevent moisture buildup. What it does:

• Creates an airtight barrier between the door and cabinet to keep cold air in
• Helps reduce frost or ice buildup by limiting warm, moist air entry
• Prevents water pooling from condensation at the door edge
• Can eliminate drafts, noisy closing, or difficulty latching caused by a damaged seal

• One replacement door gasket

• Remove power to the appliance before starting and work with clean, dry hands
• Clean mounting surface and channel; gently warm the gasket if stiffness prevents seating
• Start at a corner and press the gasket evenly into the channel; check for full, continuous contact around the door

This genuine replacement door gasket seals the refrigerator door to keep cold air inside and help maintain temperature control. Replacing a worn gasket restores proper sealing to reduce frost, leaks, and energy loss. What it does:

• Forms an airtight seal around the refrigerator door to keep cold air in and warm air out
• Helps prevent frost buildup and interior condensation by maintaining a consistent temperature
• Reduces energy use and prevents food spoilage caused by poor door sealing
• Fits into the door channel and compresses to create a tight, reliable seal

• For safety, unplug the appliance before starting any repair.
• Remove the old gasket by loosening screws/clips and pulling the gasket from the door channel; follow OEM instructions.
• Warm the new gasket or use a hair dryer to make it more pliable for easier installation and a snug fit.
• After installation, check for gaps and allow gasket to form to the door; avoid sharp tools that could damage the seal.

This door gasket is the flexible seal that lines a refrigerator door to keep cold air in and warm air out, helping maintain temperature and reduce energy use. It replaces a worn or damaged seal to restore a consistent fridge environment. What it does:

• Creates an airtight seal around the refrigerator door to minimize cold-air loss
• Helps prevent frost build-up and reduces condensation inside the compartment
• Reduces compressor run time by improving temperature retention
• Common symptoms of a failing gasket: warm spots, visible gaps, water or frost buildup, or higher energy use

• One door gasket

• Disconnect power or unplug the appliance before starting any work
• Clean the door flange thoroughly before installing to ensure a proper seal
• Start installation at a corner, fit gasket evenly into the door channel, and work around the door to avoid twists
• If the gasket is stiff, warm it gently to help seat it; if fasteners or adhesive are present on the original part, reuse them as required