Electrolux Dishwasher Dishrack

The Rack Assembly is an OEM replacement part for Frigidaire dishwashers. It provides a sturdy and organized space for placing dishes, glasses, and utensils during the cleaning cycle. The rack is designed to slide smoothly in and out, ensuring easy loading and unloading of items.

Over time, rack assemblies can become damaged due to wear, exposure to harsh detergents, or repeated impact from heavy or improperly placed items. A malfunctioning rack can affect the dishwasher's capacity and the effectiveness of the cleaning process.

Symptoms of a bad rack assembly include:

• Broken or missing tines, making it difficult to secure dishes
• Difficulty sliding the rack in or out smoothly
• Rust or corrosion on the rack's surface
• Reduced capacity or items not staying in place during cycles

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Rack Assembly is an OEM part for Frigidaire dishwashers. It holds silverware securely in place during the cleaning and drying cycles. This basket measures approximately 16.88" X 8" and has two lids. Please Note: This assembly no longer comes as 3 separate pieces and is now 1 piece.

Causes of a bad basket assembly can include regular wear and tear, damage from overloading or mishandling, and degradation from prolonged exposure to water and detergents. Clips, holders, or the basket frame may break or wear out over time, affecting its functionality.

Symptoms of a failed rack assembly are:

• Silverware shifting positions or falling during cycles
• Difficulty loading or removing dishes
• Rust or flaking of the protective coating
• Noise or rattling from a loose or damaged rack

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Upper Rack Assembly is an OEM part for Frigidaire dishwashers. It is designed to hold dishes, glasses, and other items in the upper section of the dishwasher, allowing for efficient and organized cleaning.

Causes of a bad Upper Rack Assembly can include wear and tear over time, damage from heavy or improperly placed items, or issues with the rollers and tracks that allow the rack to slide in and out smoothly.

Symptoms of a bad Upper Rack Assembly include:

• Difficulty sliding the rack in or out
• The rack falling off its tracks
• Rust or corrosion on the rack
• Broken or missing tines that hold dishes in place

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This MultiFence is a multi-position rack fence that mounts to the rack to support and organize dishes, lids, and bakeware. It helps keep items upright and in place so cycles run smoothly and cleaning performance stays consistent. What it does:

• Attaches to the rack and flips/locks to secure items of different sizes
• Helps prevent plates, lids, and trays from tipping or sliding during operation
• Replaces a fence that is cracked, warped, missing, or won't stay in position
• Common symptoms include dishes falling over, rattling during cycles, or poor results from shifted loads

• One MultiFence rack fence

• Disconnect power to the appliance; turn off water supply if servicing a dishwasher
• Pull the rack out; release the retaining tabs or clips to remove the old fence
• Align and snap the new fence onto the rack wires; ensure it pivots and locks properly
• Reinstall the rack and verify smooth operation

The Tine Row is an OEM part for Frigidaire dishwashers. It is designed for the left side tine row of your Frigidaire dishwasher. It is designed to hold and support dishes, glasses, and other items securely in the dishwasher rack. The tine row ensures that dishes are properly spaced and positioned for optimal cleaning and drying during the wash cycle.

Over time, tine rows can become damaged or worn out due to repeated use, heavy loads, or mishandling. Bending or breaking of the tines can occur, affecting the overall performance of the dishwasher and potentially causing damage to dishes.

Symptoms of a bad Tine Row include:

• Bent or broken tines
• Difficulty in securely holding dishes
• Rust or corrosion on the tines
• Dishes not being cleaned properly due to improper spacing

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Upper Rack Assembly is an OEM part for Frigidaire dishwashers. This rack provides a secure place for dishes, glasses, and other small items to be cleaned during the wash cycle. 

Causes of a bad upper rack assembly can include regular wear and tear, rust or corrosion from prolonged exposure to water, and damage from heavy or improperly placed items.  

Symptoms of a bad upper rack assembly include:

• Difficulty sliding the rack in and out
• Broken or missing tines
• Visible rust or corrosion
• Dishes not staying securely in place

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Bracket is an OEM replacement part for Frigidaire dishwashers. This component provides structural support for securing parts within the dishwasher, ensuring proper alignment and stable operation during cycles. Its precise fit is essential for the smooth functioning of your appliance.

Over time, the bracket may wear out or become damaged due to repeated use, corrosion, or accidental impact. A malfunctioning bracket can lead to misaligned components or instability during operation, potentially affecting the dishwasher's performance.

Symptoms of a bad bracket include:

• Loose or misaligned parts within the dishwasher
• Excessive noise or vibrations during operation
• Difficulty in properly installing or adjusting components
• Visible cracks or corrosion on the bracket

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This small retainer clip secures a mating part in the correct position inside your appliance, helping prevent movement, premature wear, and noise. Replace a cracked, bent, or missing clip to restore a tight, reliable hold.

• Provides a positive hold to keep the component properly seated
• Maintains alignment to reduce vibration and rattling during operation
• Helps prevent parts from backing out or disconnecting over time
• Common signs of failure: loose or misaligned component, rattling, clip that falls off, or visible damage

• Disconnect power; if working near any water connections, also shut off the water supply
• Note the clip's original orientation and position before removal
• Use needle-nose pliers or a small flat-blade screwdriver to release/install; avoid deforming mating tabs
• Ensure full engagement and that the secured part is firmly held before reassembly and testing

This pair of upper-rack adjusters secures and guides the dishwasher's top rack, letting it ride smoothly on the track and maintain proper alignment for loading and cleaning. Replaces worn or damaged adjusters to restore stable rack movement. What it does

• Guides the upper rack along its rail and keeps the rack aligned during sliding
• Replaces broken or worn adjuster pieces that cause the rack to stick, wobble, or fall off the track
• Helps maintain correct rack height and position for even spray coverage and loading
• Restores smooth, quiet rack operation when original guides are damaged

• One right upper-rack adjuster and one left upper-rack adjuster

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Remove the upper rack and slide or pop off the old adjusters per the manufacturer's instructions
• Install the new left and right adjusters on their respective sides; verify smooth movement before returning the rack to service
• If fasteners or rails are damaged, replace them as needed; for model-specific procedures

The Rack Stop is an OEM part for Frigidaire dishwashers. It serves an important purpose by preventing loaded dishes from shifting forward during wash cycles.

Causes of a bad rack stop can include wear and tear from regularly loading and unloading dishes, as well as minor impacts that cause cracks or breaks. Over time, the mounting screws may also loosen.

Symptoms of a bad rack stop include:

• Dishes shifting forward during wash cycles
• Gaps appearing around the dish rack where dishes are not fully secured
• Noise from dishes banging together or rattling around more than usual
• Potential damage to more delicate dishware

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This lower dishwasher rack replaces a worn, bent, or damaged lower basket to restore secure support for plates, bowls and cookware so dishes load and wash as intended. Durable finish helps protect items from chipping. What it does:

• Supports and organizes dishes on the dishwasher's bottom level for proper water coverage
• Restores missing or broken rack rails and tie-downs that can allow dishes to shift
• Reduces contact damage from sliding or collapsed rack areas
• Helps ensure proper drainage and spray access to bottom-rack items

• One lower rack

• Remove dishes and unplug or turn off power to the dishwasher before servicing
• Slide out and detach old lower rack; align new rack on bottom rails and test smooth travel
• Use gloves to avoid sharp edges and protect the rack's coating during installation
• No special tools typically required; inspect rollers and tracks and replace if worn

This mounting bracket secures a small appliance component in place to restore proper alignment and stable operation. It provides a simple, durable replacement for worn or broken mounting points. What it does:

• Secures internal components or assemblies to the cabinet or frame to prevent movement
• Restores proper alignment so linked mechanisms operate smoothly
• Helps stop rattling or loose parts that occur when the original holder breaks
• Fits in the original mounting location and works with the appliance's factory hardware

• One replacement holder/mounting bracket as pictured

• High-level replacement — typically accessed by removing the related cover or panel
• Use appropriate hand tools; keep fasteners organized for reassembly
• Disconnect power (unplug appliance or shut off circuit) before starting any repair