Electrolux Dishwasher Dispenser Parts

The Detergent Dispenser Assembly is an OEM part for Frigidaire dishwashers. This assembly is responsible for dispensing detergent and rinse aid at the appropriate times during the dishwashing cycle, ensuring that dishes are cleaned and rinsed effectively.

Causes of a bad detergent dispenser assembly can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process. Over time, these issues can compromise the dispenser's functionality.

Symptoms of a bad detergent dispenser assembly include:

• Improper dispensing of detergent or rinse aid
• Residual detergent left in the dispenser after the cycle
• Dishes not being cleaned properly
• The dispenser door not opening or closing correctly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Dispenser Assembly is an OEM part for Frigidaire dishwashers. It is responsible for dispensing detergent and rinse aid during the dishwashing cycle, ensuring that the correct amounts are released at the appropriate times for optimal cleaning and drying performance.

Causes of a bad dispenser assembly can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process. These issues can prevent the detergent or rinse aid from being properly released.

Symptoms of a bad dispenser assembly include:

• Improper dispensing of detergent or rinse aid
• Insufficient cleaning or rinsing results
• Leaks or drips from the dispenser area
• The dispenser door not opening or closing correctly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

A replacement dispenser assembly for refrigerator doors that secures dispenser components and restores normal dispenser function and appearance. Installs in the door to replace cracked, loose, or damaged dispenser housings and trim. What it does:

• Provides the mounting and trim for the door dispenser spout and controls.
• Restores proper alignment and fit when the original dispenser housing is cracked, broken, or loose.
• Helps stop rubbing or interference that can cause the dispenser lever or ice/water chute to stick.
• Addresses visible damage and improves the door's finished appearance.

• Disconnect power and shut off the water supply before starting work.
• Installation typically requires removal of the inner door panel and removal/installation of screws and clips; save all hardware.
• Handle door trim and any water lines carefully to avoid damage; check for leaks after reconnecting the water.

The Detergent Dispenser is an OEM part for Frigidaire dishwashers. It dispenses the necessary doses of detergent at precisely timed intervals during cycle operation. 

Causes of dispenser malfunction stem from normal wear over extended use. Mineral buildup can accumulate inside inhibiting proper dispensing action. Mechanical or electronic components controlling release functions are also susceptible to failure.

Symptoms of a bad dispenser include:

• Dishes not getting completely clean after cycles
• Residual food or film left on dishware   
• Error codes related to detergent supply issues
• Leaks or spills from the dispenser area

This OEM Frigidaire part is also compatible with some Electrolux, Gibson, and Kenmore appliance models. 

This cap is a small sealing cover that helps protect and close off an appliance connection or opening, restoring a finished appearance and helping prevent dirt or moisture intrusion. It's a simple replacement for worn or missing caps. What it does:

• Covers and seals small ports, openings, or fastener heads to block debris and moisture.
• Restores a secure fit where an original cap has cracked, broken, or gone missing.
• Helps maintain proper appliance operation by preventing contamination of components.
• Works as a cosmetic replacement to conceal exposed hardware.

• Disconnect power and shut off water before servicing the appliance.
• Inspect the mating surface for damage or residue; clean before installing the cap.
• Press or snap the cap into place; avoid excessive force or prying that can damage the part.
• Replace any damaged retaining clips or grommets as needed for a secure fit.

This housing is the molded cabinet component that supports and protects internal appliance parts while helping direct airflow. Replacing a damaged housing restores proper part fit and helps maintain safe, quiet operation. What it does:

• Protects internal components from damage and debris
• Provides mounting surfaces and alignment for internal parts
• Helps channel airflow to promote correct cooling or ventilation
• Prevents rattles and vibration caused by cracked or loose housings
• Common symptom: visible cracks, broken mounting tabs, or loose fit

• Disconnect power (and water supply if applicable) before beginning work
• Use basic hand tools; support the appliance and components while removing fasteners
• Handle edges carefully—plastic parts and metal edges can be sharp
• Secure all mounting tabs/fasteners; test operation after reassembly