Electrolux Dryer Blower Wheel Or Fan Blade

The Blower Housing Assembly is an OEM part for Frigidaire dryers. It houses the blower wheel, which circulates air through the dryer drum and out the exhaust. This assembly ensures that hot air is efficiently directed through the dryer to dry clothes properly.

Over time, the blower housing assembly can become damaged or worn out, affecting the dryer's performance. Causes of a bad blower housing assembly can include accumulation of lint or debris, wear and tear from frequent use, or physical damage to the housing or blower wheel.

Symptoms of a bad Blower Housing Assembly include:

• Reduced or no airflow from the dryer vent
• Unusual noises during operation
• Clothes taking longer to dry
• Overheating or frequent cycling off of the dryer

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Blower is an OEM part for Frigidaire dryers. It is responsible for circulating hot air throughout the dryer drum, ensuring even drying of clothes. The blower also helps expel moist air through the exhaust vent.

Causes of a bad blower can include wear and tear from regular use, accumulation of lint or debris, or damage from foreign objects entering the blower housing.

Symptoms of a bad blower include:

• Clothes taking longer than usual to dry
• Insufficient airflow or no air movement through the dryer vent
• Unusual noises during the drying cycle
• The dryer overheating or shutting down unexpectedly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Blower Wheel Assembly is an OEM part for Frigidaire dryers. This part circulates air through the drum and exhaust it outside the dryer.  

Causes of a bad blower wheel assembly include wear and tear from prolonged use, obstruction by lint or debris, and physical damage to the wheel or its mounting.

Symptoms of a bad blower wheel assembly include:

• Reduced drying efficiency
• Unusual noises during operation, such as rattling or squeaking
• Overheating of the dryer
• Poor airflow from the exhaust vent

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This dryer blower moves air through the drum, lint filter, and exhaust so laundry dries efficiently. Replacing a damaged blower restores proper airflow and helps prevent long dry times and overheating issues.

• Draws and circulates air across the heater, through the drum and lint filter, and out the vent
• Maintains correct airflow and temperature control for consistent drying performance
• Worn, cracked, or clogged blowers may cause weak exhaust airflow and extended dry cycles
• May also present as rattling/grinding noises from the blower area or high-heat shutoffs

• Disconnect power; if gas, turn off gas supply before servicing
• Access the blower by removing the front/lower panel and blower cover
• Clean lint/debris from the housing and duct; transfer any seals or hardware from the original as needed
• After installation, spin the blower by hand to verify free movement; reassemble and test airflow