Electrolux Refrigerator Parts

This factory screw secures interior or door components in your refrigerator so they stay tight and aligned. Replace missing, stripped, or corroded hardware to eliminate looseness and prevent parts from shifting or rattling during use.

• Fastens brackets, trim, rails, bins, or handles to the cabinet or door
• Restores a secure fit when the original screw is lost, damaged, or rusted
• Helps correct looseness, vibration, and rattling from unsecured parts
• Common symptoms: loose or wobbling handle/trim, misaligned parts, missing hardware

• Disconnect power to the appliance before servicing; turn off water if working near dispenser/ice areas
• Match to the original hardware and install in the same location; reuse any washers/spacers
• Start threads by hand to prevent cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to avoid stripping threads or cracking plastic

Routes water from inlet valve to dispenser and ice maker. Replace if tube is cracked, leaking, kinked, or damaged to restore proper water routing.

This bin door is the hinged cover for a door storage bin. It restores a secure flip-down barrier that keeps items contained and helps prevent spills when you open or close the appliance door.

• Provides a flip-down cover for a door bin to retain items securely
• Pivots on side hinge points for easy access to contents
• Replaces cracked, warped, or missing covers that won't stay in place
• Common symptoms include broken tabs, loose fit, or items falling during door movement

• Disconnect power and empty the affected bin before starting
• Release the old cover from its side hinges/tabs; note orientation for reassembly
• Allow the new cover to reach room temperature; align with hinge points and snap into place without forcing
• Open and close the cover to confirm smooth pivot and secure engagement

This is a support bar that reinforces and stabilizes a drawer or door shelf inside the refrigerator. It helps keep the drawer properly aligned on its tracks and prevents sagging under the weight of stored items. Replace this part if the drawer tilts, slides unevenly, or if the original support bar is cracked or broken.

This factory screw secures panels, brackets, and other components in your cooking appliance. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and keep parts properly aligned during use.

• Fastens components to maintain proper alignment and stability
• Helps prevent vibration, rattling, and loose parts during operation
• Replace if threads are stripped, the head is damaged, or the screw is missing
• Commonly used to mount internal or exterior parts in ranges and wall ovens

• Disconnect power and allow the appliance to cool; shut off gas supply if applicable
• Use the correct driver bit to avoid stripping the screw head
• Install in the original location and do not overtighten
• If the receiving threads are damaged, repair or replace the mating part before installation

Aluminum strap secures the defrost heater against the evaporator coil. Replace if broken, cracked, or missing to maintain proper heater contact.

Replaces a cracked, broken, or missing front edge trim on your refrigerator shelf. Restores the finished lip that supports items and prevents spills.

A light socket that holds the bulb in your refrigerator's freezer compartment. This electrical component provides power to illuminate the freezer interior when the door opens. Replace it when the freezer light won't turn on, flickers, or the bulb won't stay securely in place.

Freezer drain tube that channels defrost water from the drain pan to the drip pan. Replace if cracked, leaking around the grommet, or causing floor leaks.

Fan seal and drain tube kit for refrigerators. Includes rubber seal for condenser fan motor and drain tube. Replace if seal is torn or tube is cracked.

Adjustable leveling foot for refrigerators and freezers. Installs at the base to stabilize and level the appliance. Replace if cracked or broken.

Interior light won't turn on when door opens? This push-button door switch restores automatic lighting. Moderate DIY repair with basic tools.

Positions the condenser fan and motor in the rear machine compartment. Replace if cracked, warped, or damaged to restore proper airflow direction.

Limits refrigerator door travel to prevent over-rotation and protect hinges. Replace this plastic stop if cracked, broken, or missing to maintain alignment.

Bypass cap replaces water filter when using external filtration or no filter needed. Allows ice maker and water dispenser to function normally.

The Freezer Leveling Leg is an OEM part for Frigidaire upright freezers. It stabilizes and balances the appliance on uneven surfaces.

Causes relate to typical bearing wear from years of weight support. Rust forms without protective finish. Cracks develop from impact damage.

Symptoms of compromised leveling legs include:

• Excessive vibrations, noise or shaking during compressor operation
• Doors that no longer close or seal properly
• Ice maker malfunctions on frost-free models

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.