Parts for Poulan PBV200 TYPE 5: Engine Assembly Parts

This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners.Spark plugs in outdoor appliances such as these might have to be replaced if they are not functioning as usual. If the ignition system is not working, if the spark plugs are not igniting in the first place, or if the spark plugs are igniting but the engine is not powering on, it is likely that the spark plugs are damaged and should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: Husqvarna, Stihl, Craftsman, Weed Eater, Toro, Cub Cadet, Ryobi, Homelite, Poulan, Wheel Horse, Tecumseh, Tanaka, Black Max, and Green Machine.

Craftsman manufactures this cylinder head bolt that fastens the cylinder of a small gasoline-powered engine to the engine manifold. There are often two head bolts that secure the cylinder. The placement of the bolts is important as it not only fastens the two engine parts together, but holds the cylinder gasket in place, as well. Among the equipment that uses this type of cylinder head bolt are leaf blowers, power vacuums, grass trimmers, edgers, and hedge trimmers. While it is rare for the bolts to fail, the gasket they hold in place can sometimes wear and allow oil to leak outside the engine manifold or into the combustion chamber. This is revealed by white, oily smoke or an abundance of oil on the equipment. When replacing the head gasket, it is a good idea to replace the cylinder head bolts, as well, as they will have received a good deal of wear, potentially weakening them. These bolts are sold separately, so the user should make sure to purchase the correct number of bolts needed. Before beginning, the user should consult diagrams of the internal engine parts and their order. These bolts are OEM genuine replacement parts, built to match the factory originals.

Replacement screw for leaf blowers and line trimmers. Secures housing panels and covers. Order this part if original is stripped, missing, or broken.

This is a genuine OEM replacement muffler kit sourced directly from the manufacturer. It is used on many different models of leaf blowers and outdoor equipment. The muffler attaches to the engine to lower the noise level. Listening to loud noise for a prolonged period can lead to permanent hearing damage. Additionally, many neighborhoods have strict regulations concerning noise. Using machinery with a muffler can prevent being fined. Over time, the muffler may stop working efficiently due to corrosion or physical damage from being dropped or dinged. This muffler kit is designed to eliminate as much noise as possible during use. This is an easy fix that requires very little time.A socket set, hex-head screwdriver, and Torx screwdriver are needed to remove the old muffler kit and install the new one. The blower should be cool to the touch before replacing the muffler. Remove the spark plug to prevent accidental ignition. Remove the old muffler, retaining the hardware for installing the new one. Install the muffler first, followed by the muffler cover. Reinstall the spark plug and start the engine to check the noise level.This muffler kit is made of durable plastic and metal; it is sold as a single kit containing the muffler and muffler cover. Hardware is not included. This muffler kit is compatible with blowers manufactured by Craftsman, Weed Eater, Poulan, Jonsered, and Husqvarna.

Gas-powered yard and garden machines require regular routine maintenance and care. When these machines develop problems, it can be difficult to determine the cause. When the engine on a blower seems to be struggling to operate or runs poorly, it may be a good idea to add a full gasket replacement to the maintenance routine. The gaskets will fit various parts of the engine and other systems and will keep the engine air tight and free of leaks. This replacement gasket set includes a full set of gaskets compatible with leaf blowers and other blowers made by Husqvarna, Poulan, Jonesred and Weed Eater. This is a set of OEM replacement parts that ships as a kit. It will require disassembly of the various engine parts and systems, but is often done with little more than screwdrivers and wrenches.

Gas-powered yard and garden machines require regular routine maintenance and care. When these machines develop problems, it can be difficult to determine the cause. When the engine on a blower seems to be struggling to operate or runs poorly, it may be a good idea to add a full gasket replacement to the maintenance routine. The gaskets will fit various parts of the engine and other systems and will keep the engine air tight and free of leaks. This replacement gasket set includes a full set of gaskets compatible with leaf blowers and other blowers made by Husqvarna, Poulan, Jonesred and Weed Eater. This is a set of OEM replacement parts that ships as a kit. It will require disassembly of the various engine parts and systems, but is often done with little more than screwdrivers and wrenches.

Rubber grommet for line trimmers and outdoor power equipment. Replaces cracked, worn, or missing grommets that provide vibration dampening and protection.

These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

Ignition module for gas leaf blowers and line trimmers. Mounts near the flywheel to generate spark. Replace if cracked, corroded, or failing to start.

This replacement piston kit is designed to be used with many different types of handheld lawn and garden equipment. The pistons are important parts of the engine. The crankshaft powers the pistons, so they move up and down within the cylinder. The purpose of the pistons is to transfer the gas that expands within the cylinder. The pistons can begin to wear out over time, which means that they could fail, which will cause serious problems for engine performance. If there are issues with the piston, a replacement piston kit is essential to get the machine back up and running. When a piston goes bad, it will cause the engine power to decrease. In some cases, the engine might lose all power. Replacement will require pliers, a set of wrenches, and a screwdriver to complete. This high-quality piston kit replacement is a genuine OEM part. It is sold individually. The part can be used for pole pruners, edgers, leaf blowers, string trimmers, and hedge trimmers. Compatible brands include Weed Eater, Poulan, Poulan Pro, Husqvarna, and Craftsman.

Engine piston kit for gas trimmers and outdoor equipment. Replaces worn, damaged, or corroded pistons that cause poor compression and engine performance.

Piston ring seals the space between piston and cylinder wall in gas-powered outdoor power equipment engines. Replace if worn, cracked, or causing smoke.

Fix a loose or rattling piston with this wrist pin retainer. Secures the piston pin in trimmers, blowers, and hedge trimmers. Basic hand tools needed.

This is a connecting rod assembly used in many types of lawn and garden equipment. It is made of durable metal and connects the engine crankshaft to the piston. The connection rod assembly is also tasked with transferring power to the crankshaft from the piston. This is an important component that is required for the proper functioning of an internal combustion engine.If the connecting rod assembly has gone bad, it can cause knocking sounds from the engine, low oil flow and pressure, and excessive oil consumption. In some cases, a broken connecting rod assembly will also result in an overheating engine. If the connecting rod assembly has gone bad, a wrench and screwdriver will be needed to replace it. Make sure to wear work gloves, disconnect the spark plug wire, and let the engine cool before working on the part.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The connecting rod assembly is designed for use with string trimmers, hedge trimmers, leaf blowers, edgers, and pole prunes manufactured by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

Seals the crankcase opening to prevent oil leaks around the crankshaft. Replace if you notice oil seepage or grinding noises. Confirm fit with model.

Crankshaft outer bearing creates a flexible joint for moving components. Replace when you notice excessive vibration or noise during operation. Verify fit with your equipment's model number before ordering.

Retaining ring fastener for brush cutters and trimmers. Holds components securely together. Replace if cracked, worn, or missing for proper assembly.

Replace a damaged crankcase assembly if your leaf blower has low compression, oil leaks, or won't start. Moderately difficult repair for DIYers.

Bearing facilitates smooth rotation in outdoor power equipment. Replace when you notice grinding noise, vibration, or rough operation. Verify fit.

Gas-powered yard and garden machines require regular routine maintenance and care. When these machines develop problems, it can be difficult to determine the cause. When the engine on a blower seems to be struggling to operate or runs poorly, it may be a good idea to add a full gasket replacement to the maintenance routine. The gaskets will fit various parts of the engine and other systems and will keep the engine air tight and free of leaks. This replacement gasket set includes a full set of gaskets compatible with leaf blowers and other blowers made by Husqvarna, Poulan, Jonesred and Weed Eater. This is a set of OEM replacement parts that ships as a kit. It will require disassembly of the various engine parts and systems, but is often done with little more than screwdrivers and wrenches.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

Replace your leaf blower's worn or frayed starter rope to restore easy engine starting. Includes rope and handle for quick repairs. Verify fit with your model.

Replacement handle for leaf blowers. Installs on the main housing to provide grip and control. Order this part if your handle is cracked or broken.

Replace your leaf blower's cracked or damaged fan wheel. This impeller component installs on the motor shaft to generate airflow. Order now if broken or worn.

Replacement mounting screw for chainsaws and outdoor power equipment. Secures components and covers. Replace if stripped, missing, or damaged during repair.

This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

Gas-powered yard and garden machines require regular routine maintenance and care. When these machines develop problems, it can be difficult to determine the cause. When the engine on a blower seems to be struggling to operate or runs poorly, it may be a good idea to add a full gasket replacement to the maintenance routine. The gaskets will fit various parts of the engine and other systems and will keep the engine air tight and free of leaks. This replacement gasket set includes a full set of gaskets compatible with leaf blowers and other blowers made by Husqvarna, Poulan, Jonesred and Weed Eater. This is a set of OEM replacement parts that ships as a kit. It will require disassembly of the various engine parts and systems, but is often done with little more than screwdrivers and wrenches.