Parts for Mtd 752Z365-SUB: Engine Parts

This replacement part is an engine, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This is a complete engine and is found in many different types of lawn mowers. The engine is arguable the

M6 x 1 flange bolt for outdoor power equipment. Secures engine covers, handles, and components. Replace if stripped, rusted, or missing threads.

Engine valve cover cap for outdoor power equipment. Replaces cracked, broken, or missing valve covers on small engines. Direct fit for blowers, tillers, and more.

Fuel tank nipple connects fuel lines to the tank on small engines. Replace if cracked, leaking, or worn to restore proper fuel line connections.

Engine gasket kit for snow throwers. Seals engine components to prevent leaks and ensure smooth operation. Replace if you notice oil leaks or unusual noises.

The breather hose is designed as a valve or vent that only functions one way. It allows air into the fuel tank but ensures that no air or emissions escape the tank. When this hose is not functioning, emissions and air could be leaking from the tank and ca

Engine losing power or running rough? A worn cylinder head assembly often causes reduced efficiency. This part covers the cylinder and houses valves.

External gasket kit seals carburetor and engine surfaces on lawn equipment. Replace when you notice fuel leaks or loss of compression. Verify fit with your model.

Fixes engine misfires and rough running caused by improper valve clearance. This adjusting nut helps restore correct valve timing on lawn mowers and tillers.

Engine running rough or making ticking noises? A worn rocker arm stud can affect valve timing. This replacement stud restores proper valve operation.

Replace a damaged engine block on your snowblower with this short block assembly. Fixes severe engine damage, oil leaks, or cracked blocks. Requires mechanical skill and 3-4 hours to install.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and depen

Replacement muffler assembly for gas snowblowers and lawn engines. Installs on exhaust system. Order if your original is rusted, cracked, or damaged.

Seals the muffler connection on small engines to prevent exhaust leaks. Replace if you notice excessive noise or exhaust smell. Verify fit with your model.

M8 hex nut secures components on outdoor power equipment engines. Replace if stripped, corroded, or missing to properly fasten parts during repair.

Engine mounting stud for snow throwers and lawn equipment. Secures engine components together. Replace if broken, stripped, or missing threads.

This replacement part is a stud, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Studs are typically found in or around the carburetor in many lawn mowers. These studs hold specific parts in

Carburetor assembly for snow throwers and small engines. Installs in the engine to mix air and fuel. Replace if cracked, clogged, or worn from use.

Engine won't start in cold weather? This choke bracket controls airflow to help start your snow thrower engine. Simple repair takes 15-20 minutes.

Replacement fastener nut for lawn and garden equipment. Threads onto bolts to secure parts together. Replace if stripped, corroded, or missing.

Carburetor choke knob for snow thrower engines. Replaces cracked, broken, or missing choke control knobs. Installs on the carburetor assembly.

Throttle control knob for snow throwers and gas snowblowers. Replaces broken, cracked, or missing throttle knobs for smooth engine speed adjustment.

Snowblower won't start or shuts off unexpectedly? This ignition switch controls engine power. Direct replacement part restores reliable starting.

Choke push rod for snow thrower engines. Connects choke control to carburetor. Replace if bent, damaged, or missing for proper choke operation.

This genuine replacement part is an air filter heating cover for snowblowers. The air filter heating pipe cover is the plastic piece that covers the heating pipe of a snowblower. This cover is meant to protect the user from burning themselves on the heati

Flange bolt fastener for outdoor power equipment. Secures components throughout engine and chassis. Replace if stripped, corroded, or missing.

Push rod kit for small engines. Installs in the valve train assembly. Replace if rods are bent, damaged, or worn from normal engine operation.

Oil fill plug assembly for small engines. Seals the oil fill opening to prevent leaks. Replace if cracked, stripped, or missing to maintain proper seal.

Governor arm shaft for small engines on lawn and garden equipment. Connects governor assembly to carburetor. Replace if worn, damaged, or broken.

Engine won't start after sudden stop? A sheared flywheel key breaks the connection between crankshaft and flywheel. Simple DIY repair.

Crankcase cover for small engines. Protects internal components from debris and damage. Replace if cracked, broken, or missing to maintain proper engine protection.

Prevents oil leakage in snow thrower engines. Replace if you notice oil seeping during or after use. Verify fit with your model number before ordering.

Engine oil seal prevents oil leaks in snow thrower engines. Replace if you notice oil seeping around the crankshaft or engine case. Verify fit with your model.

Ignition coil assembly for snow throwers and lawn engines. Installs on the engine block. Replace if your original coil is cracked, broken, or detached.

Fuel line kit for small engines. Carries fuel through the machine. Replace if cracked, leaking, or ends don't fit securely even when clamped down.

Replace a leaking or damaged oil drain assembly on your snowblower engine. Includes valve for easier oil changes. Basic hand tools required.

Stator for gas snow throwers. Mounts to the engine to generate power for lights or battery charging. Replace if cracked, damaged, or missing.

Replacement flywheel for small engines. This rotating wheel component stores rotational energy. Order a new one if yours is cracked, rusted, or damaged.

Fix engine overheating issues with this cooling fan. Keeps your small engine running at proper temperature. Direct replacement part for reliable operation.

Engine won't start or pull cord slips? This starter cup connects the recoil mechanism to start your engine. Simple bolt-on replacement part.

Fastener nut for outdoor power equipment. Secures components in place during operation. Replace if stripped, corroded, or missing to restore assembly.

Flat washer for engine recoil starter assembly. Replaces worn, missing, or damaged washers during recoil maintenance or repair. Ensures proper spacing.

M6 flange bolt for lawn and garden equipment engines. Replaces broken, stripped, or missing bolts. Secures engine components and covers.

Starter rope won't retract or engine won't crank? This recoil starter assembly includes housing, spring, pulley, rope and grip. Moderate DIY repair.

This is a genuine replacement ignition key that is manufactured by MTD for use in select models of outdoor power equipment. The ignition key is a plastic piece that is inserted into the ignition cylinder to start the machine. Turning the plastic key will

If your snow thrower won't maintain consistent speed or the engine surges, the throttle control may need replacement. Moderate DIY repair in 30-45 minutes.

The governor rod is a genuine replacement part found on select models of snowblowers. This rod is responsible for connecting the throttle cable and throttle body, helping to open and close the throttle to change the speed of the engine. This durable metal

Can't check your oil level accurately? This dipstick assembly measures engine oil in hard-to-reach spaces. Simple DIY install for tillers and snow throwers.

Can't check your oil level accurately? This dipstick assembly measures engine oil in hard-to-reach spaces. Simple DIY install for tillers and snow throwers.

This is a genuine MTD fuel cap replacement made for use on select snowblowers. It features a molded gasket for secure sealing and less risk of losing parts. The fuel cap is responsible for securing the fuel in the fuel tank during operation so that it doe

Fuel filter for small engines on snowblowers, tillers, and lawn equipment. Replace annually or if engine runs rough to ensure clean fuel flow. Verify fit with your model number.

Complete fuel tank assembly for snow throwers and tillers. Includes tank and mounting hardware. Replace if cracked, leaking, or damaged during storage.

Snow thrower won't start or cranks slowly? This electric starter restores reliable starting in cold weather. Moderately difficult repair for most DIYers.

Replacement shield cover for blower housing. Installs over the blower assembly to protect internal components. Order a new cover if yours is cracked or missing.

Replaces a cracked, hardened, or broken primer bulb on gas-powered engines. Installs on the carburetor to inject fuel for priming before starting.

Fix fuel leaks or loose carburetor connections with this fuel bowl mounting bolt. Secures the fuel bowl to prevent sediment clogs. Quick 5-minute fix.

Engine runs too fast or won't maintain steady speed? This governor bracket controls engine RPM. Common repair for speed control issues on small engines.