Parts for Ge PDWT400R10BB: 01 - Escutcheon & Door Assembly Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Water hardness test strip tool for dishwashers. Tests mineral content in tap water to help determine optimal detergent and rinse aid settings.

This hex washer-head screw is used in dishwashers to secure panels, brackets, and other hardware. Replacing a missing or corroded fastener restores a tight, stable installation and helps stop looseness or vibration during cycles.

• Fastens dishwasher panels, brackets, trim, or mounts to the cabinet/frame
• Replaces lost or stripped hardware after service or installation
• Helps address loose or rattling panels and minor misalignment
• Stainless steel construction per OEM spec for moisture-prone environments

• Disconnect power and water supply before servicing the dishwasher
• Wear gloves; sheet metal edges can be sharp
• Start threads by hand to avoid cross-threading; tighten with an appropriate driver
• Do not overtighten, especially when threading into plastic

Replacement mounting screw for dishwasher installation. Secures dishwasher components and panels. Order a new screw if original is stripped, missing, or lost.

Hex washer head screw secures panels, brackets, and shields inside your appliance. Replace missing, stripped, or corroded fasteners for proper fit.

This OEM replacement part is an outer panel assembly for dishwashers. The outer panel assembly is the main piece that makes up the front of the dishwasher. Over time, an outer panel assembly can become damaged due to excessive wear and tear. If the outer panel is cracked or damaged to the point where it is no longer protecting the inside of the dishwasher, it will need to be replaced.To replace this part, start by shutting off power to the dishwasher by either unplugging it or turning off the circuit breaker. Once powered off, proceed to open the dishwasher door and unthread the screws that secure the outer panel to the dishwasher. After removing the screws lift the panel out and away from the dishwasher. Set it to the side and align the new panel in its proper position. Once aligned thread the mounting screws to secure it to the dishwasher.This genuine replacement part is sold individually and is sourced directly from the manufacturer. It is compatible with Samsung brand refrigerators.

Black outer door panel assembly for dishwashers. Replaces cracked, dented, or discolored door panels. Restores the cosmetic appearance of your appliance.

Fix a broken or cracked dishwasher door handle. Simple repair requires only a Phillips and star screwdriver. Takes about 30 minutes to replace.

This is a white self-tapping screw (size 8-18, 1/2 inch long) used to fasten panels or components within the dishwasher. The white finish helps it blend with light-colored interior or exterior surfaces. Replace this screw if it is stripped, missing, or corroded, which can result in loose or unsecured parts.

Replacement mounting screw for dishwashers. Secures components and panels inside the unit. Order a new screw if yours is stripped, missing, or damaged.

The Blower Motor Assembly is an OEM part for GE dishwashers. This part is responsible for driving the dishwasher's venting system, which plays a key role in the drying process of your dishes.

Over time, the Blower Motor Assembly may need replacement due to wear and tear, damage, or failure. A malfunctioning blower motor can lead to ineffective drying of dishes, increased cycle times, or the dishwasher failing to complete its drying cycle properly.

Symptoms of a bad Blower Motor Assembly include:

• Dishes remaining damp or wet even after the drying cycle is complete.
• Unusual noises coming from the dishwasher, indicating that the blower motor is struggling to operate.
• The dishwasher stopping or pausing during the drying cycle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This inlet transition is a molded connector that fits between the appliance cabinet and the inlet opening to guide incoming air and help maintain a sealed airflow path. It restores proper fit and reduces air leakage where the inlet meets the cabinet. What it does:

• Provides a finished, secure connection at the appliance inlet to direct airflow into the unit
• Helps reduce air leaks that can reduce drying/heating performance or cause airflow imbalance
• Replaces worn, cracked or broken inlet trim that can rattle or vibrate during operation
• Restores correct clearance and sealing where the inlet joins the cabinet

• One inlet transition piece

• Basic hand tools typically required; access the inlet area by removing the back panel or service panel as applicable
• Handle carefully to avoid bending or damaging adjacent trim and mounting tabs
• Disconnect power (and gas if applicable) before beginning service; follow all safety precautions in the appliance manual
• If mounting hardware is missing or damaged, replace with OEM-specified fasteners for secure fit

Foam brace cushions and supports dishwasher internal components to reduce vibration and noise. Replace if worn, compressed, or missing for proper fit.

Replaces the lower access panel on your dishwasher to restore a finished look and protect internal components. Needed when cracked, damaged, or missing.

Size: 8-18 AB TSQ 5/8 SS

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Dishwasher mounting screw used to secure internal components and panels. Replace if screw is stripped, missing, or damaged during appliance repair.

Left-hand door hinge assembly for dishwashers. Installs on the left side to support and secure the door to the cabinet. Replace if bent, broken, or worn.

Dishwasher won't start or run? A faulty door latch prevents cycles from beginning. This assembly secures the door and engages the safety switch. DIY fix.

Size: 10-32GX FLT25 .615 S

Detergent door won't stay closed or latch broken? This dishwasher dispenser releases soap and rinse aid during cycles. DIY repair in 20-30 minutes.

Replacement cap that seals the rinse aid dispenser on your dishwasher door. Replace if cracked, broken, warped from heat, or missing to prevent leaks.

Secures the detergent dispenser to the dishwasher inner door panel. Replace if cracked, broken, or rusted to restore proper alignment and mounting.

The GE screw is an OEM replacement part responsible for securing various components and parts of the dishwasher together. The screw is designed to provide a tight and secure connection for different panels, brackets, or other elements within the dishwasher. It plays a crucial role in maintaining the structural integrity of the appliance by preventing loose parts.

Common causes of a bad screw can include regular wear and tear from frequent use, exposure to moisture leading to corrosion, or damage from over-tightening. A compromised screw can result in loose or unstable components, which can affect the dishwasher's performance and safety.

Symptoms of a bad screw include:

• Loose or wobbly components within the dishwasher
• Difficulty in securing parts properly
• Visible rust or corrosion on the screw
• The screw head being stripped or damaged

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replaces a cracked, broken, or missing dishwasher vent cover that mounts on the inner door panel. Shields the exhaust opening and directs airflow.

Replacement vent bracket assembly for your dishwasher. Secures the vent duct system in place. Order a new bracket if yours is cracked, broken, or missing.

Replacement mounting screw for dishwasher door panels, control assemblies, and internal components. Needed when original screws are stripped, rusted, or missing.

This is a small flapper valve located in the dishwasher vent assembly that opens to release steam and hot air during the drying cycle. It closes during wash cycles to prevent water from escaping. Replace this flapper if dishes are not drying properly, if you notice steam leaking during the wash cycle, or if the flapper is warped, cracked, or stuck.

This vent flapper is the exterior exhaust flap that opens to let dryer air and lint exit and closes to keep weather, pests and drafts out when the dryer is off. It restores proper airflow at the outside vent hood. What it does:

• Opens with dryer airflow to allow exhaust to escape and closes when idle to block outside air.
• Helps prevent backdrafts, pests and rain from entering the vent system.
• Can restore normal drying performance when a stuck or broken flap was restricting airflow.
• Commonly replaced when the flap is cracked, warped, jammed or does not seal.

• One vent flapper/exterior exhaust flap.

• Disconnect power to the dryer (and gas supply if applicable) and work from the outside hood when possible.
• Remove the exterior vent hood or access cover to inspect and replace the flap; basic hand tools required.
• Check that the flap moves freely after installation and seats against its seal to prevent air leaks.
• Clean or repair the ductwork to avoid repeat failures.

Cap assembly for dishwasher door. Installs on the interior door panel to seal openings. Replace if cap is missing, cracked, or broken during shipping.

This lock nut assembly kit replaces a worn or missing locking nut that secures threaded fasteners on dishwasher components. It restores secure fastening to help stop movement, noise, or loose panels. What it does:

• Provides a threaded locking nut that holds mating fasteners in place on dishwasher assemblies
• Helps prevent loosening from vibration that can cause rattling or misalignment
• Commonly used where a nut must resist backing off without adhesive
• Compatible with the original mounting locations that use a captive/locking nut design

• Disconnect power to the dishwasher before accessing internal components
• Verify you are replacing the exact nut for the affected mounting point; hand-start threads to avoid cross-threading
• Tighten securely but avoid overtightening to prevent thread or component damage
• Keep track of screws and fasteners and test operation after reassembly

Grinding noise during drying cycle? This vent door actuator opens and closes the dishwasher vent for proper airflow. Easy DIY fix, one screw install.

Includes 12 screws.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.