Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Estate Refrigerator Dispenser Parts

Best Seller
Estate Ice Dispenser Guide
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2180224

The Ice Dispenser Guide is an OEM replacement part for Whirlpool brand refrigerators. These brands also include Maytag, KitchenAid, Norge, Roper, Estate, and Kenmore models. It directs ice from the ice bucket to the dispenser chute. It helps to prevent jams by guiding the ice through the dispenser system smoothly and evenly.

You should replace the ice dispenser guide if you notice any signs of wear or damage, such as cracks or warping. A damaged dispenser guide can cause ice jams or blockages. This can prevent ice from dispensing properly or create excessive noise or vibration during the dispensing process.

Get yours today and restore proper ice dispensing function and prevent future issues with the ice dispenser system.

This part fixes the following symptoms
  • Ice maker dispenses too much ice
See more...
Do-It-Yourself Stories from Customers like You Ice cube dispenser/flap was broken not actuating the ice bucket motor.   Peter P. • Sonoma , CA • July 24, 2023

Ice Door Kit, Control Bracket, and Ice Dispenser Guide were purchased. I followed two videos on replacing the parts. The Control Bracket WP2180226 / AP6005965, was straight forward and I discovered a snapped pin on the old bracket causing an electric switch to be out of place... that repair was easy. When it came to the hinges of the ice chute, I discovered the snap-in, on right side, of the hinge was cracked... this is why the pin escaped. This cracked part is molded into the entire... Read more

More
$16.95
Compare At:
$20.17
You Save:
$3.22

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Ice Dispenser Chute Door
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2180353

The Ice Dispenser Chute Door is an OEM part for Whirlpool refrigerators. This component is located in the ice dispenser mechanism on the freezer door and is responsible for opening and closing the ice chute. The chute door helps to dispense ice properly and prevents warm air from entering the freezer compartment, which can lead to frost buildup and inefficient cooling.

Symptoms of a failing Ice Dispenser Chute Door include:

  • Ice not dispensing properly or getting stuck in the chute
  • Frost or ice buildup around the ice dispenser area
  •  Warm air entering the freezer, causing temperature fluctuations
  • The dispenser door not opening or closing correctly, leading to gaps

Causes of a bad ice dispenser chute door can include wear and tear from regular use, damage from ice jams or blockages, and degradation of the door’s sealing mechanism over time.

This OEM part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

 

Note: This part longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door and the mounting tabs are broken, you can use the broken tab ice door kit 8201756.

This part fixes the following symptoms
  • Door sweating
See more...
Do-It-Yourself Stories from Customers like You Ice dispenser chute door was not closing or sealing   Robert H. • West Palm Bch , FL • July 23, 2025

The ice dispenser chute door had not been sealing for years. The ice cubes on the lower portion of the ice bin would melt enough eventually to then freeze up into a big, amalgamated blob of ice due to ambient air coming up the chute. This melt-then-freeze would happen, to the extent the chute froze to its own closure. Despite service technician visits over a period of six years nothing they did resolved the issue. I opened the freezer door to reach into the bin from the top to extract usable... Read more

More
$16.95
Compare At:
$20.00
You Save:
$3.05

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Dispenser Overflow Grille
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206670B

The Dispenser Overflow Grille is an OEM part for Whirlpool refrigerators. It fits in the dispenser area and catches any spills or overflow from the water and ice dispenser, preventing them from dripping onto the floor or into the appliance.

You should replace the dispenser overflow grille if it becomes cracked, warped, or otherwise damaged. Causes of a bad overflow grille can include constant exposure to water, accidental impacts, or regular wear and tear over time.

Symptoms of a bad dispenser overflow grille include:

  • Visible cracks or breaks in the grille
  • Water pooling around the dispenser area
  • The grille not fitting securely in place
  • Difficulty in keeping the dispenser area clean

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Other colors:

Do-It-Yourself Stories from Customers like You Stubborn deposits in our water discolored the overflow frille on our refrigerator. Absent this part, we had to paint!   Stephen D. • Vancouver , WA • March 25, 2014

Finding the part was puzzling. AppliancePros had the relevant manufacturer's part schematics handy on-line through which I quickly identified and order the replacement part. But the best aspect was AppliancePros' Amazon-like excellence in a) pricing and b) swift delivery (with precious tracking included). Read more

More
$34.95
Compare At:
$41.59
You Save:
$6.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Detergent Lid Pin
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3372028

The Detergent Lid Pin is an OEM part for Whirlpool dishwashers. This pin plays a crucial role in securing the detergent dispenser lid, ensuring that it opens and closes correctly during the washing cycle. This dishwasher detergent lid pin is also included in the cover kit 4387043.

Over time, the detergent lid pin can wear out or break due to regular use, exposure to harsh detergents, or accidental force. When the pin is damaged, it can cause the detergent lid to malfunction, leading to improper dispensing of detergent and reduced cleaning performance.

Symptoms of a bad detergent lid pin include:

  • The detergent dispenser lid not staying closed
  • Detergent not being dispensed correctly during the wash cycle
  • Visible damage or wear on the pin
  • The dispenser lid not opening or closing smoothly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Latch would not open consistently on detergent dispenser   James G. • Waxhaw , NC • January 12, 2015

Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle. Read more

More
$10.95
Compare At:
$12.92
You Save:
$1.97

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Dispenser Overflow Grille
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206670W

The Dispenser Overflow Grille is an OEM part for Whirlpool refrigerators. This grille sits below the water and ice dispenser on the refrigerator door, catching any spills or overflow to keep the area clean and prevent water from dripping down the refrigerator. For Black order 2206670B, for Bisque order 2206670T

Causes of a bad dispenser overflow grille can include repeated exposure to water, impact damage, or general wear and tear.

Symptoms of a bad dispenser overflow grille include:

  • Cracks or visible damage to the grille
  • Water not being effectively caught, leading to drips and spills on the refrigerator door
  • Discoloration or staining of the grille

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Stained and etched dispenser paddles needed to be replaced   Josh R. • Corpus Christi , TX • February 04, 2015

Once the parts arrived, I followed the help video that was emailed to me with my order confirmation step by step. Super useful! The video quality and editing were well done and the instructions were very specific. I felt like a pro! Read more

More
$55.38
Compare At:
$65.35
You Save:
$9.97

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Water Lever (Wht)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10152858

Color: White

Do-It-Yourself Stories from Customers like You The ice dispenser lever was cracked and did no longer trigger the dispensing of the ice   Andrea M. • Honolulu , HI • March 01, 2015

I replaced the Ice Dispenser Lever. Since the replacement part is only available in white and my fridge is bone, I replaced also the Water Dispenser Lever, so it looks much better. I followed the instructions in the video, which were very useful and very well done. My problem was that the refrigerator is a KitchenAid built-in, while the instructions were for a Whirlpool, so the removal of the faceplate was quite different from what was shown in the video and more difficult. Also there were some... Read more

More
$53.33
Compare At:
$64.00
You Save:
$10.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Estate Dispenser Overflow Grille
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206671W

Color: white. Measures about 9 inches wide by 2-1/2 inches deep.

Do-It-Yourself Stories from Customers like You Broken dispenser lever retainer ice guide and overflow grille   Tony R. • Milford , DE • May 23, 2015

I watched the videos and made the repairs in a little over 5 minutes! It was great and if I ever need parts again I was use this site. I have told everybody about this site. Read more

More
$51.27
Compare At:
$61.52
You Save:
$10.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Estate Fill Cup (Icemaker)
Genuine Whirlpool part
By: Whirlpool
Part Number: W10122561

This icemaker fill cup guides incoming water from the refrigerator's inlet tube into the ice mold, helping prevent splashing and freeze-ups during the fill cycle. Replacing a cracked or missing cup restores consistent fills and reduces leaks.

  • Directs water from the fill tube straight into the icemaker mold
  • Helps prevent overspray, splashing, and ice buildup around the icemaker
  • Replace if the cup is cracked, warped, loose, or missing
  • Common symptoms: water dripping/freezing under the icemaker, clumped or misshapen cubes
What's included: 1 fill cup Install notes:
  • Unplug the refrigerator and turn off the water supply before servicing
  • Remove the icemaker assembly as needed to access the inlet/fill area
  • Release the old cup and seat the new cup so the fill tube aligns with the opening
  • Restore water and power; check for proper fill and any leaks

Do-It-Yourself Stories from Customers like You Broken parts   Miguel D. • Miami , FL • October 24, 2016

I SAW THE VIDEO AND WAS SO EASY THAT MY CHILDREN COULD DO IT Read more

More
$18.47
Compare At:
$21.98
You Save:
$3.51

IN STOCK
Ships Today Guaranteed
Add to Cart

Estate refrigerator dispenser replacement parts are crucial for keeping your fridge running smoothly and ensuring you have easy access to cold, refreshing water or ice at all times. Whether it's the water valve, dispenser control panel, or ice chute, these parts play a vital role in maintaining the functionality and convenience of your refrigerator.

Your refrigerator is an essential appliance in your home, helping to keep your food fresh and beverages chilled. Estate refrigerator parts are designed to fit seamlessly with your appliance, ensuring that everything from water flow to ice dispensing works perfectly. Plus, opting for OEM replacement parts guarantees compatibility and quality, so you can trust that these components will work effectively with your Estate refrigerator.

When your refrigerator dispenser is in top shape, it makes life a little bit easier by providing quick access to cold water and ice. High-quality replacement parts are readily available, so you can confidently keep your refrigerator performing at its best.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store