Parts for Ge PSCF5VGXCFBB: 01 - Freezer Door Parts

Replacement mounting screw for refrigerator panels, brackets, and internal components. Secures loose assemblies when original fasteners are stripped or missing.

White door handle assembly for side-by-side refrigerators. Replaces cracked, broken, or worn handles. Installs on refrigerator or freezer doors.

Stainless steel fastener secures your refrigerator door handle to the door assembly. Replace worn, loose, or missing hardware for solid grip and alignment.

Replaces a cracked or broken door stop on your refrigerator. This plastic cam riser installs on the cabinet to control door closure and positioning.

Replaces broken or cracked refrigerator door stop. Installs on door to limit swing range and prevent cabinet damage. Needed when missing or worn.

This door gasket seals the refrigerator/freezer compartment to keep cold air inside and help maintain consistent temperatures. A tight seal reduces frost buildup and lowers energy use while helping food stay fresher. What it does

• Forms an airtight seal around the door to prevent warm air from entering
• Helps maintain proper internal temperature and reduce compressor run time
• Reduces frost and ice buildup by keeping humidity out of the compartment
• Common symptoms of a failing gasket: visible gaps, cold air leaks, increased frost, or higher energy bills

• Clean the door frame and gasket channel before installation for a secure fit
• Warm the gasket slightly to aid installation if needed; avoid overstretching
• Unplug the appliance or disconnect power before working on the door for safety

White plastic cam closure that aligns and secures the freezer door in the hinge area. Replace if cracked, broken, or worn to restore proper alignment.

Replaces a broken or worn freezer door cam closure on side-by-side refrigerators. Installs on the door to control opening range and secure latching.

Guides ice from the ice maker to the dispenser or storage bin. Replace if cracked, broken, or missing to prevent ice jams and ensure proper alignment.

Replacement mounting screw for refrigerator installation. Used to secure components and panels. Replace if lost, stripped, or damaged during service.

Replace your refrigerator's dispenser drip tray if cracked, stained, or missing. Catches water and ice drips in the dispenser recess for a clean look.

Replacement dispenser grill recess drip tray for side-by-side refrigerators. Collects spills and overflow in the dispenser area. Replace if cracked or missing.

Ice won't dispense or dispenser flap sticks open? The ice dispenser solenoid controls ice flow. DIY-friendly repair with our install video.

The recess door retainer secures the dispenser's ice chute flapper in the refrigerator door. Replacing a cracked or missing retainer restores proper flapper pivot and sealing to help reduce frost buildup and air leaks around the dispenser.

• Holds the recess/ice door on its pivot within the dispenser assembly
• Helps the flapper close fully to seal the ice chute
• Restores smooth open/close action of the dispenser door
• Common symptoms: loose or fallen flapper, poor chute seal, frost or condensation in the dispenser area, and ice clumping near the chute

• Unplug the refrigerator before servicing the dispenser
• Carefully remove the dispenser bezel/control panel to access the ice chute door assembly
• Note spring orientation and retainer position; transfer components to the new retainer
• Verify flapper movement and seal before reassembly and restoring power

If your dispenser light stays off or won't turn on, this control board restores proper illumination. Moderate DIY, requires clip release and wiring.

Dispenser housing shield cover for your refrigerator. Protects internal dispenser components. Replace if cracked, broken, or missing for proper coverage.

Ice dispenser door assembly seals the ice chute opening on your refrigerator. Replace if cracked, warped, or the rubber gasket is damaged and leaking air.

Spring that provides closing tension for the refrigerator water/ice dispenser door flap. Keeps the dispenser sealed when not in use. Replace if door hangs open or won't close.

Replacement dispenser door recess crank for refrigerators. Operates the ice/water dispenser door mechanism. Replace if broken, worn, or corroded.

Replaces a cracked, broken, or worn ice chute funnel in your refrigerator door dispenser. Directs ice from the auger to your glass or container.

This white ice dispenser paddle is the lever you press on the freezer door to release ice. Replacing a worn or broken paddle restores reliable ice dispensing and a clean, like-new look at the dispenser.

• Transfers your push to the dispenser switch to start ice delivery
• Helps fix a cracked, broken, loose, or missing paddle
• Addresses a lever that sticks or doesn't return smoothly
• Useful when ice won't dispense unless the switch is pressed directly
• Refreshes a yellowed or scuffed dispenser paddle

• Disconnect power to the refrigerator before servicing
• Remove the drip tray and dispenser trim/control panel to access the paddle
• Note spring/lever orientation and transfer any hardware from the original paddle
• Reassemble, restore power, and test ice dispensing

Replacement paddle for refrigerator ice dispenser. Press to activate ice release. Replace if cracked, broken, or won't spring back after pressing.

Water or ice dispenser not working? This dispenser switch activates when you press the lever. Easy DIY repair—takes about 30 minutes with basic tools.

Spring that controls dispenser arm movement in refrigerators. Installs on the paddle assembly. Replace if broken, detached, or missing to restore arm function.

Connects water supply tubing sections in your refrigerator. Replace this plastic compression union if it's cracked, leaking, or broken. Installs inline.

Fix a non-responsive water or ice dispenser with this refrigerator dispenser control touchpad. Restores button functionality when touchpad fails.

Lever lock secures your refrigerator door handle assembly. Replaces broken or missing locks that allow handle to loosen or detach from door.

Freezer module support bracket for refrigerators. Installs inside the freezer to hold shelving or storage components. Replace if cracked or broken.

Fixed shelf that secures the freezer control module assembly in place. Replace if cracked, broken, or missing to properly mount electronics and components.

Replace your refrigerator's damaged or missing wire tilt-out basket. This door-mounted storage bin restores organization and accessibility for smaller items.

Handle lock bracket for refrigerator doors. Secures handle locking mechanism in place. Replace if bracket is cracked, broken, or missing for proper fit.

Rubber grommet secures the base grille on your refrigerator. Replace if cracked, worn, or missing to restore a snug fit and reduce vibration or rattle.

Plastic bushing that fits inside the lower freezer door hinge assembly. Replace when cracked, worn, or broken to restore smooth door operation.

Replacement mounting screw for refrigerator panels, brackets, door handles, and trim. Needed when original hardware is missing, stripped, or corroded.

Door hinge thimble for side-by-side refrigerators. Installs on the door hinge assembly. Replace if cracked, broken, worn, or missing for proper alignment.

Bushing that lines the upper hinge pin on refrigerator doors. Replace if cracked, worn, or missing to restore smooth door swing and proper alignment.