Parts for Ge PHE25PGTBFBB: 08 - Fresh Food Section Parts

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Sheet metal screw secures refrigerator panels, trim, and brackets. Replace missing, stripped, or corroded screws to restore proper fit and assembly.

Air tower assembly that directs airflow in your refrigerator's fresh food compartment. Replaces cracked, broken, or damaged air towers with missing clips.

Air tower assembly that directs airflow in your refrigerator's fresh food compartment. Replaces cracked, broken, or damaged air towers with missing clips.

Air tower assembly that directs airflow in your refrigerator's fresh food compartment. Replaces cracked, broken, or damaged air towers with missing clips.

Replaces broken or missing water filter cover trim that secures your filter in place. Prevents debris and light leaks. Confirm fit with your model number.

Replacement shelf support bracket for refrigerator interior. Installs at shelf edge to restore level positioning. Needed when original is broken, cracked, or missing.

Secures refrigerator panels, brackets, and trim. Replace if screw is stripped, missing, or no longer holds components tightly in place.

Rubber grommet secures the base grille on your refrigerator. Replace if cracked, worn, or missing to restore a snug fit and reduce vibration or rattle.

Replacement dial for refrigerator chill/pan drawer temperature control. Snaps onto control shaft. Replace if broken, cracked, or missing for easy adjustments.

Small linkage secures and positions the pan-chill assembly in your refrigerator, keeping the drain collector aligned. Replace if cracked or broken.

Fix uneven cooling or frozen fresh food with this refrigerator air damper shutter. Controls airflow between compartments. Takes 15-30 minutes to install.

This replacement chill pan collects defrost and condensation water and channels it away so your refrigerator interior stays dry and free of pooled water. Designed to restore normal drainage and reduce leaks. What it does:

• Collects defrost and condensation water from the evaporator area
• Directs water to the evaporator/condenser area to evaporate safely
• Helps prevent water pooling inside the fresh-food or freezer compartment
• Can reduce musty odors caused by standing water and trapped debris

• Disconnect power to the appliance before beginning any service
• Empty the compartment and remove any components blocking access
• Inspect and clean the drain tube and mounting points when replacing the pan
• Use OEM instructions for fitment and reassembly

Discharge pan chill duct directs cold air in your refrigerator's cooling system. Replace if cracked, broken, or missing to restore proper airflow.

Replacement control knob for your refrigerator's deli or snack drawer temperature adjustment. Restores ability to set airflow when original is broken or missing.

Self-adhesive foam strip seals gaps in your refrigerator's evaporator cover and drain trough. Replace when worn, compressed, or during rust repairs.

Protective grille cover that mounts over the temperature sensor in your refrigerator. Replace if cracked, broken, or missing to properly shield the sensor.

The Temperature Sensor Seal is an OEM part for GE refrigerators. This seal is designed to protect the temperature sensor from moisture and other environmental factors that could affect its accuracy and longevity. By providing a barrier against the harsh conditions within a refrigerator, such as humidity and temperature fluctuations, this seal ensures that the sensor can accurately monitor and control the refrigerator's internal temperature.

Causes of a malfunctioning Temperature Sensor Seal can include wear and tear over time, degrading the seal's effectiveness. Physical damage like tears or punctures can allow moisture to reach the sensor. Improper installation may leave gaps or loose areas around the sensor, compromising the seal.

Symptoms of a bad Temperature Sensor Seal include:

• Inaccurate temperature readings.
• Condensation or frost near the sensor location.
• Frequent cycling or unusual patterns in the refrigerator's cooling process.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

Protects the freezer lamp and diffuses light evenly. Replace if cracked, missing, or discolored to restore proper bulb protection. Confirm fit.

Replacement light shield for your refrigerator. Covers and protects the interior light bulb. Order a new shield if your original is cracked or missing.

Replace your worn or broken refrigerator bottom hinge pin. Supports the door and serves as the lower pivot point on the bottom hinge assembly.

Fix electrical connection issues in your refrigerator with this terminal block socket assembly. Connects power to components. Moderate DIY repair.

The Bulb Light is an OEM part for GE refrigerators. It is designed to illuminate the interior of the refrigerator and freezer compartments, making it easier to see and access food items. This light bulb fits securely into the designated socket and provides bright, reliable lighting to enhance visibility.

You should replace the bulb light if it burns out or becomes damaged. Causes of a bad bulb light can include regular wear and tear, electrical issues, or physical damage from impacts or vibrations. A faulty bulb can leave the refrigerator compartments dim or completely dark, making it difficult to find items.

Symptoms of a bad bulb light include:

• The light not turning on when the refrigerator door is opened
• Flickering or intermittent lighting
• A visibly burned-out or broken bulb

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Refrigerator door hinge top assembly with pin. Installs at the top of the door to secure and pivot. Replace if cracked, broken, or worn for proper operation.

White bottom door hinge secures the refrigerator door at the lower pivot point. Replace if hinge is cracked, broken, or causing door misalignment.

Bottom hinge that supports the refrigerator door weight and serves as the pivot point. Replace if worn, cracked, or causing door misalignment and sagging.

Mounting screw for dryers, refrigerators, and side-by-side units. Replaces lost, stripped, or damaged screws during appliance repairs or maintenance.

This bezel light is the interior trim piece that holds and protects the freezer compartment lamp, restoring a finished look and proper lamp fit. Use it when the existing bezel is cracked, warped, or missing. What it does:

• Secures the freezer lamp or lamp assembly in the compartment and keeps the bulb properly positioned
• Protects the bulb from contact with stored items and helps direct interior light
• Replaces cracked, broken, or discolored bezels that prevent the lamp from seating correctly
• Can resolve issues with a loose or rattling lamp housing

• Disconnect power to the appliance before accessing the interior lamp area to avoid shock
• Handle the bezel and nearby plastic components gently to avoid cracking during removal/installation
• Bulb removal or replacement may be required to install the bezel; use only approved replacement bulbs
• Refer to your refrigerator's service manual for model-specific disassembly and reassembly instructions

Replacement mounting screw for refrigerator brackets, panels, and handles. Restores secure fit when original fastener is missing, stripped, or damaged.

Fix interior lights that won't turn on, stay on constantly, or delay when opening the door. This switch replacement takes 10-15 minutes with basic tools.

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Bypass cap allows refrigerator water and ice dispensers to work without a filter installed. Replace if cracked or leaking. Confirm fit with your model.

Houses the water filter and connects to the water supply line. Replace if water leaks, sprays during filter changes, or dispenser flow decreases. Verify model fit.

Replacement water tank cover for your refrigerator. Installs over the internal water reservoir. Order if your cover is cracked, broken, or missing.

Replacement evaporator drip pan for GE refrigerators. Collects defrost water beneath the evaporator. Replace if cracked, rusted, or leaking onto shelves.

Includes evaporator fan motor.

Replaces broken or cracked fresh food door lever assembly on side-by-side refrigerators. Installs with a Phillips screwdriver and pliers in minutes.

The Fresh Food Lever Assembly is an OEM part for GE refrigerators. It plays a crucial role in the operation of the refrigerator, enabling the smooth adjustment of settings within the fresh food compartment. This lever assembly is responsible for the user's ability to fine-tune the temperature and humidity levels, ensuring that the food stored inside remains fresh and well-preserved. For the same part in white, purchase WR11X10007.

Over time, the lever assembly may become worn or damaged due to regular use, accidental impacts, or environmental factors such as extreme temperatures or humidity.

Symptoms of a bad Fresh Food Lever Assembly include:

• Difficulty in adjusting the temperature or humidity settings.
• The lever becoming loose or unresponsive.
• Inconsistent temperature control within the fresh food compartment.
• Increased energy consumption as the refrigerator works harder to maintain settings.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement door closure spring for refrigerator hinges. Installs on door hinge assembly to provide tension for proper closing. Needed when broken or worn.