Parts for Ge PSCF5RGXAFBB: 07 - Fresh Food Section Parts

Sheet metal screw secures refrigerator panels, trim, and brackets. Replace missing, stripped, or corroded screws to restore proper fit and assembly.

Air tower assembly that directs airflow in your refrigerator's fresh food compartment. Replaces cracked, broken, or damaged air towers with missing clips.

Air tower assembly that directs airflow in your refrigerator's fresh food compartment. Replaces cracked, broken, or damaged air towers with missing clips.

Air tower assembly that directs airflow in your refrigerator's fresh food compartment. Replaces cracked, broken, or damaged air towers with missing clips.

Replacement shelf support bracket for refrigerator interior. Installs at shelf edge to restore level positioning. Needed when original is broken, cracked, or missing.

Front mounting grommet for refrigerator ice makers. Secures ice maker assembly to freezer wall. Replace if cracked, missing, or worn to restore stability.

Secures refrigerator panels, brackets, and trim. Replace if screw is stripped, missing, or no longer holds components tightly in place.

Rubber grommet secures the base grille on your refrigerator. Replace if cracked, worn, or missing to restore a snug fit and reduce vibration or rattle.

Replacement dial for refrigerator chill/pan drawer temperature control. Snaps onto control shaft. Replace if broken, cracked, or missing for easy adjustments.

Small linkage secures and positions the pan-chill assembly in your refrigerator, keeping the drain collector aligned. Replace if cracked or broken.

This shutter assembly mounts near the chill pan drawer area inside the refrigerator and helps regulate airflow to maintain proper temperature in that compartment. It controls how much cold air reaches the chill pan section to keep items at the ideal temperature. Replace this part if the chill pan area is too cold, too warm, or if the shutter mechanism is cracked, stuck, or no longer opening and closing properly.

This replacement chill pan collects defrost and condensation water and channels it away so your refrigerator interior stays dry and free of pooled water. Designed to restore normal drainage and reduce leaks. What it does:

• Collects defrost and condensation water from the evaporator area
• Directs water to the evaporator/condenser area to evaporate safely
• Helps prevent water pooling inside the fresh-food or freezer compartment
• Can reduce musty odors caused by standing water and trapped debris

• Disconnect power to the appliance before beginning any service
• Empty the compartment and remove any components blocking access
• Inspect and clean the drain tube and mounting points when replacing the pan
• Use OEM instructions for fitment and reassembly

Discharge pan chill duct directs cold air in your refrigerator's cooling system. Replace if cracked, broken, or missing to restore proper airflow.

Replacement control knob for your refrigerator's deli or snack drawer temperature adjustment. Restores ability to set airflow when original is broken or missing.

Self-adhesive foam strip seals gaps in your refrigerator's evaporator cover and drain trough. Replace when worn, compressed, or during rust repairs.

Protective grille cover that mounts over the temperature sensor in your refrigerator. Replace if cracked, broken, or missing to properly shield the sensor.

The Temperature Sensor Seal is an OEM part for GE refrigerators. This seal is designed to protect the temperature sensor from moisture and other environmental factors that could affect its accuracy and longevity. By providing a barrier against the harsh conditions within a refrigerator, such as humidity and temperature fluctuations, this seal ensures that the sensor can accurately monitor and control the refrigerator's internal temperature.

Causes of a malfunctioning Temperature Sensor Seal can include wear and tear over time, degrading the seal's effectiveness. Physical damage like tears or punctures can allow moisture to reach the sensor. Improper installation may leave gaps or loose areas around the sensor, compromising the seal.

Symptoms of a bad Temperature Sensor Seal include:

• Inaccurate temperature readings.
• Condensation or frost near the sensor location.
• Frequent cycling or unusual patterns in the refrigerator's cooling process.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

Protects the freezer lamp and diffuses light evenly. Replace if cracked, missing, or discolored to restore proper bulb protection. Confirm fit.

Replacement light shield for your refrigerator. Covers and protects the interior light bulb. Order a new shield if your original is cracked or missing.

Replace your worn or broken refrigerator bottom hinge pin. Supports the door and serves as the lower pivot point on the bottom hinge assembly.

This middle reflector assembly directs and focuses heat inside the oven cavity to help ensure even cooking and protect surrounding components. It restores proper heat reflection when the original reflector is warped, dented, or missing. What it does

• Reflects and redirects oven heat toward the cooking cavity for more even baking and roasting.
• Protects adjacent oven panels and wiring from direct heat exposure.
• Replace when the reflector is cracked, bent, heavily corroded, or causing uneven temperatures or hot spots.
• Matches OEM fit and mounting points for its intended oven model families.

• One middle reflector assembly.

• Disconnect power to the appliance and allow the oven to fully cool before servicing.
• Handle the reflector carefully—edges may be sharp; wear gloves and eye protection.
• Verify fit and orientation against the oven's service diagram; do not force into place.

This middle reflector assembly directs heat and light inside the appliance to help ensure even cooking and protect surrounding components. It replaces a damaged or missing middle reflector to restore proper internal reflectivity and airflow. What it does:

• Reflects heat/light away from the heating element to promote even cooking and prevent hotspots
• Shields internal wiring and components from direct heat exposure
• Helps maintain designed airflow patterns for efficient operation
• Replace if warped, cracked, burned, or missing to reduce risk of uneven cooking or component damage

• Disconnect power (and gas, if applicable) before servicing; allow the appliance to cool completely
• Handle carefully—edges may be sharp; wear gloves and eye protection
• Keep all original fasteners; verify alignment before tightening

The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.

You should replace the light socket if it becomes faulty. Causes of a bad light socket can include wear and tear from regular use, electrical issues such as short circuits or power surges, and corrosion from moisture exposure.

Symptoms of a bad light socket include:

• The refrigerator light not turning on when the door is opened
• Flickering or intermittent light operation
• Visible damage or corrosion on the socket
• The light bulb not fitting securely or falling out

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This light socket connects the interior lamp to the refrigerator wiring so the interior light turns on when the door opens. It replaces a damaged or burned socket to restore reliable lighting. What it does:

• Holds the interior lamp securely and provides the electrical contact for operation
• Restores lighting when a damaged socket causes the light to fail or flicker
• Prevents intermittent connections from poor contacts or heat damage
• Works with the appliance's existing wiring and bulb style

• Disconnect power to the appliance before inspecting or replacing the socket.
• Handle bulbs and sockets carefully; use gloves to avoid cuts and for hygiene.
• Test operation after installation; replace the bulb if necessary.

The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments. 

All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster. 

Symptoms of a burnt out refrigerator light bulb include:

• Dim or no light illuminating inside refrigerator shelves  
• Shadows and dark spots making it difficult to find items
• Higher utility costs from leaving the door open to see inside

This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models. 

Refrigerator door hinge top assembly with pin. Installs at the top of the door to secure and pivot. Replace if cracked, broken, or worn for proper operation.

White bottom door hinge secures the refrigerator door at the lower pivot point. Replace if hinge is cracked, broken, or causing door misalignment.

Bottom hinge that supports the refrigerator door weight and serves as the pivot point. Replace if worn, cracked, or causing door misalignment and sagging.

Wire harness assembly for refrigerator freezer compartment lighting. Replace if wires are frayed, connections are loose, or harness is damaged or missing.

This is a small 8-32 threaded nut used as a fastener in various mounting locations within the refrigerator. It secures internal components and brackets in place to maintain structural integrity. Replace this nut if it has become stripped, corroded, or lost during a previous repair, causing a loose or rattling component.

This bezel light is the interior trim piece that holds and protects the freezer compartment lamp, restoring a finished look and proper lamp fit. Use it when the existing bezel is cracked, warped, or missing. What it does:

• Secures the freezer lamp or lamp assembly in the compartment and keeps the bulb properly positioned
• Protects the bulb from contact with stored items and helps direct interior light
• Replaces cracked, broken, or discolored bezels that prevent the lamp from seating correctly
• Can resolve issues with a loose or rattling lamp housing

• Disconnect power to the appliance before accessing the interior lamp area to avoid shock
• Handle the bezel and nearby plastic components gently to avoid cracking during removal/installation
• Bulb removal or replacement may be required to install the bezel; use only approved replacement bulbs
• Refer to your refrigerator's service manual for model-specific disassembly and reassembly instructions

Replacement mounting screw for refrigerator panels, brackets, and hardware. Restores secure fit when original is missing, stripped, or corroded.

Fix interior lights that won't turn on, stay on constantly, or delay when opening the door. This switch replacement takes 10-15 minutes with basic tools.

Replaces the water filter in your refrigerator to bypass filtration. Installs in the filter housing to maintain water flow when a filter isn't needed.

Holds filter cartridge and routes water to dispenser and icemaker. Replace if dispenser flow drops, stuttering occurs, or leaks develop. Confirm fit.

Foam insulation wrap for refrigerator manifold. Reduces heat transfer and condensation around refrigerant lines. Replace if torn, compressed, or missing.

Replaces cracked, broken, or missing water filter cover trim on your refrigerator. Secures the inline filter assembly and keeps the compartment sealed.

Replacement water tank cover for your refrigerator. Installs over the internal water reservoir. Order if your cover is cracked, broken, or missing.

Replacement evaporator drip pan for GE refrigerators. Collects defrost water beneath the evaporator. Replace if cracked, rusted, or leaking onto shelves.

Replaces the freezer door latch lever assembly that secures and operates the door mechanism. Needed when the original lever is broken, cracked, or worn.

The fresh food door hinge lever assembly is a linkage mechanism at the fresh food section's door hinge that guides smooth door movement and helps maintain proper door alignment. It works in combination with the door cam to ensure the door closes evenly and seals tightly against the cabinet. Replace this part if the fresh food door sags, swings unevenly, fails to close on its own, or does not seal correctly.

The Fresh Food Lever Assembly is an OEM part for GE refrigerators. It plays a crucial role in the operation of the refrigerator, enabling the smooth adjustment of settings within the fresh food compartment. This lever assembly is responsible for the user's ability to fine-tune the temperature and humidity levels, ensuring that the food stored inside remains fresh and well-preserved. For the same part in white, purchase WR11X10007.

Over time, the lever assembly may become worn or damaged due to regular use, accidental impacts, or environmental factors such as extreme temperatures or humidity.

Symptoms of a bad Fresh Food Lever Assembly include:

• Difficulty in adjusting the temperature or humidity settings.
• The lever becoming loose or unresponsive.
• Inconsistent temperature control within the fresh food compartment.
• Increased energy consumption as the refrigerator works harder to maintain settings.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement door closure spring for refrigerator hinges. Installs on door hinge assembly to provide tension for proper closing. Needed when broken or worn.

The refrigerator leveling screw is an adjustable threaded leg located at the bottom corner of your refrigerator that lets you raise or lower that corner to achieve a level, stable position. Proper leveling ensures the doors swing shut on their own and that the refrigerator runs efficiently. Replace or adjust this part if your refrigerator rocks on the floor, the doors won't stay closed, or you notice uneven gaps around the door seals.