Frigidaire Rack Or Shelf

The Frigidaire Oven Rack is an OEM part for Frigidaire ranges and wall ovens. It provides an elevated surface for baking sheets, casserole dishes, and other cookware during the heating process. The rack measures approximately 24 inches wide by 16 inches deep.

Causes of a bad oven rack could be cracks, bends, or breaks that develop from repeated expansion and contraction during heating. Normal wear from years of use can impact the integrity of welds or supports.

Symptoms of a bad Oven Rack include:

• Difficulty sliding the rack in or out
• The rack not sitting level or securely in the oven
• Warping or bending of the rack
• Rust or discoloration on the rack surface

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Rack is an OEM replacement part for Frigidaire wall ovens. It is designed to provide a stable and secure surface for placing cookware and bakeware inside the oven.

Causes of a bad rack can include warping or bending from exposure to high oven heat over extended use. Heavy pots or pans dragged across rack surfaces may puncture or dent racks over time.

Symptoms of a bad rack include:

• Difficulty smoothly sliding racks in or removing them from the oven
• Sagging or unstable surfaces that may compromise food placement
• Rust or corrosion on the rack

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models

The Rack is an OEM part for Frigidaire ovens. This durable oven rack provides a stable surface for placing dishes, pans, and other cookware, allowing hot air to circulate freely around the food for consistent baking or roasting. Engineered to withstand high temperatures, this rack adjusts to various heights within the oven, accommodating different cooking needs and preferences.

Causes of a bad oven rack include warping due to excessive heat, corrosion from spills or moisture, and physical damage from heavy cookware.

Symptoms of a bad Rack include:

• Difficulty fitting the rack into the oven slots
• Uneven cooking or baking results
• The rack becoming stuck or difficult to move

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This oven rack provides a sturdy, level surface for cookware inside your range or wall oven. Replace a bent, rusted, or missing rack to restore safe support and smooth, reliable placement at the proper cooking height.

• Slides into the oven's side rails to hold pans at the desired level
• Supports bakeware evenly and maintains proper clearance for airflow
• Replace when the rack is warped, corroded, flaking, or difficult to slide
• Common symptoms include wobbling, not sitting level, or a missing safety stop

• Allow the oven to cool completely; wear gloves to protect from sharp edges
• Insert the rack with the stop end toward the rear; engage both side rails evenly
• Push in until the rear stops seat; the rack slides freely and sits level
• To remove, pull to the stop, lift the front slightly, then pull straight out

This oven rack provides a stable, level surface for cookware and restores smooth sliding performance in your range or wall oven. Replace a bent, rusted, or missing rack to maintain proper spacing and safe support while cooking. What it does:

• Supports pans and dishes at the correct height inside the oven
• Slides on the side rails for easy loading and access
• Replace if warped, heavily rusted, or no longer sliding smoothly
• A damaged or missing rack can make loading unsafe and affect results

• Disconnect power and allow the oven to cool completely before servicing
• Pull the old rack forward to the stop, lift the front, and remove
• Insert the new rack with the rear stops toward the back; engage both side rails evenly
• Check your owner's manual—many ovens require removing racks before a self-clean cycle

Color: chrome. Measures about 18 inches wide by 15 inches deep.

This replacement air fry tray lets your oven's air-fry function hold and crisp foods safely on the oven rack. It restores the manufacturer-intended tray used with Peregrine-series air fry ovens for even airflow and easy cleanup. What it does

• Holds food above the oven surface so hot air can circulate for air-frying and crisping.
• Designed to work with the oven's air-movement system to help promote even browning.
• Replaces a bent, warped, cracked, or missing air-fry tray that prevents proper use of the air-fry feature.
• Helps contain drips and crumbs for easier cleanup when roasting or air-frying.

• One air fry tray (Peregrine) as shown.

• Slide the tray onto the oven rack in the same orientation as the original; no tools usually required.
• Allow the oven to cool and disconnect power before removing the old tray or installing the new one.
• Inspect oven racks and supports for damage before use; do not use if warped or compromised.
• Hand wash or follow manufacturer care instructions; avoid abrasive cleaners that could damage the finish.

This replacement oven rack restores a stable, level surface for baking and broiling. If your original rack is bent, worn, or missing, it lets you position cookware securely and slide it in and out with ease.

• Provides a sturdy shelf for cookware inside the oven cavity
• Slides on side rails to adjust cooking height as needed
• Helps keep pans level for consistent placement
• Common signs it's time to replace: rack is warped, corroded, has broken welds, or no longer slides smoothly

• Allow the oven to cool completely before servicing
• Wear gloves to protect hands from sharp edges
• Pull the old rack straight out of the side guides; align and slide the new rack into the same guides
• Ensure rack stops are fully engaged before loading cookware

Color: chrome. Measures about 23 inches wide by 15 inches deep.