Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Frigidaire Switch

Best Seller
Frigidaire Large Surface Element Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436001

The Large Surface Element Switch is an OEM replacement part for Frigidaire ranges and cooktops. It is a component that controls the power and temperature settings for one of the larger surface heating elements on the appliance.

Symptoms of a faulty Large Surface Element Switch include:

  • Difficulty in adjusting or maintaining consistent heat settings
  • The surface element not heating up or cycling on and off unexpectedly
  • Flickering or erratic behavior of the surface element
  • Burning smell or visible signs of overheating

Causes of a bad large surface element switch can include normal wear and tear, exposure to excessive heat or moisture, or electrical malfunctions.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore range and cooktop models.

This part fixes the following symptoms
  • Won't start
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You The front left element (8 inch) would stay hot on lower control settings.   Michael S. • West Seneca , NY • September 13, 2022

After an internet search, the likely problem was a faulty "Element Switch.." I actually unplugged the stove and removed the switch (I did NOT disconnect the wires). I obtained the part number on the switch, disassembled it, observed that the contacts were highly degraded, reassembled the switch and reinstalled it back into the stove. This all provided confidence the SWITCH was faulty. One switch on the AppliancePartsPros.com website (AP2591804) looked exactly like the switch in the stove... Read more

More
$34.57
Compare At:
$41.14
You Save:
$6.57

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Front Loading Washer Door Lock And Switch Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 131763256

The Front Loading Washer Door Lock and Switch Assembly is an OEM part for Frigidaire washing machines. This component ensures that the washer door is securely locked during operation, preventing leaks and interruptions, and also communicates with the control board to allow the wash cycle to start.

Causes of a bad door lock and switch assembly can include wear and tear from regular use, damage from forced door opening, electrical failures within the locking mechanism, or issues with the switch contacts.

Symptoms of a bad door lock and switch assembly include:

  • The washer door not locking or unlocking properly
  • Error codes related to the door lock
  • The washer not starting its cycle
  • Interruptions in the wash cycle due to door lock failures

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You My washer would not complete the spin cycle and wring the water out of the clothes   Lisa C. • Spring Lake , NC • March 12, 2014

I ran a diagnostics check on the washing machine and came up with the error code E47 -Board thinks the door PTC circuit is open in spin. The washer thought the door was open and would not finish the spin. I was left with a washer full of very wet clothes. This repair was SO extremely easy. I only needed to uses a pair of needle nose pliers and a screw driver. It took less than 10 minutes, start to finish. Now the new door lock assembly registers correctly and my clothes are completely... Read more

More
$113.95
Compare At:
$136.74
You Save:
$22.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Small Surface Element Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436000

The Small Surface Element Switch is an OEM replacement part for Frigidaire electric ranges. It serves as the control knob and circuitry to safely power one of the smaller cooking elements. 

Symptoms of a bad surface element switch include:

  • Inability to ignite or regulate heating for its assigned zone
  • Switch knob that feels loose, won't click smoothly, or won't stay set  
  • Intermittent or unreliable power to the smaller element coils
  • Tripped circuit breakers upon use that don't reset

Causes relate to thousands of rotations wearing micro-switches and wiring terminals within the control assembly. Regular cleaning around knobs can prevent accelerated deterioration from baked-on debris conducting excess heat.

This genuine OEM replacement part is compatible with other brands including Electrolux and Kenmore as well.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Surface switches not operating properly; going from cool to very hot etc   Guy G. • Guthrie , OK • October 10, 2014

Replaced all four element switches. Switches arrived within two days of ordering. That's about normal for AppliancePartsPros. They were the correct ones; not generic, and fit the original control knobs perfectly. This kind of service is what I'm used to from ApplicanePartsPros. Read more

More
$62.64
Compare At:
$73.92
You Save:
$11.28

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W11384469

The Door Switch is an OEM part for Whirlpool refrigerators. This switch plays a crucial role in monitoring the status of the refrigerator door. It detects when the door is open and closed and signals the refrigerator to suspend or resume cooling operations accordingly. 

Causes of a bad door switch can include general wear and tear over time, exposure to moisture, or impact damage. Please check for proper connection and that the wires are intact before replacing the switch.

Symptoms of a bad door switch include: 

  • The refrigerator fails to resume cooling after closing the door
  • The inside light fails to turn on when the door is opened
  • Abnormal energy usage due to improper door monitoring

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Do-It-Yourself Stories from Customers like You Fridge interior light kept going out   Phil D. • Phoenix , AZ • June 16, 2014

Replaced door switch - it took less than 5 minutes - works perfectly Read more

More
$29.30
Compare At:
$35.16
You Save:
$5.86

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Door Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509459

The Door Switch is an OEM part for Frigidaire microwaves, designed to ensure the appliance operates safely by signaling when the door is securely closed. This switch is critical for preventing the microwave from running if the door is open, a key safety feature that protects users from exposure to microwave radiation.

Causes of a bad Door Switch can include mechanical failure due to normal wear and tear from repeated opening and closing of the microwave door. 

Symptoms of a bad Door Switch include:

  • The microwave not starting or heating when the door is closed.
  • The appliance continuing to operate when the door is opened.
  • Intermittent operation or sudden stopping during use.
  • Displaying error messages related to the door or switches.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Sears Kenmore elite blowing main circuit breaker when trying to start   Dennis S. • Bucyrus , OH • November 17, 2018

Check fan operation and was OK. Everything else worked except when microwave was started for a cycle. I looked around on internet and found someone had trouble with the door switches. I started to check door switches and found one shorted. I replaced both lower door switches and it took care of problem. Read more

More
$42.95
Compare At:
$51.11
You Save:
$8.16

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Surface Element Control Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 316238201

The Surface Element Control Switch is an OEM part for Frigidaire electric ranges and cooktops. It is a critical component that controls the operation of the surface heating elements, allowing you to turn them on and off, and select the desired heat settings.

Symptoms of a faulty Surface Element Control Switch include:

  • Inability to turn on or control the surface heating elements
  • Inconsistent or erratic heat output from the elements
  • Elements not cycling on and off properly or staying on continuously
  • Heating elements not responding to temperature adjustments

Causes of a bad Surface Element Control Switch can include electrical faults, physical damage, or wear and tear over time due to frequent use and exposure to high temperatures. 

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Burner would not turn down on high all the time   Mark M. • Hillsboro , OR • June 29, 2020

Replaced burner switch and all was working properly. Great customer service and part replacement. Read more

More
$69.95
Compare At:
$134.55
You Save:
$64.60

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Turn Start Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134398300

The Turn Start Switch is an OEM part for Frigidaire dryers. It is responsible for initiating the drying cycle when the switch is turned. This switch is a critical component that engages the dryer’s motor and starts the drying process, ensuring your clothes are dried effectively.

You should replace the turn start switch if it becomes faulty or unresponsive. Causes of a bad start switch can include regular wear and tear from frequent use, electrical issues, or damage due to excessive force or mishandling.

Symptoms of a bad turn start switch include:

  • Dryer not starting when the switch is turned
  • Intermittent starting issues
  • The switch feeling loose or not engaging properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Knob broke on dryer started using pliers to turn it on eventually the stem broke off the start switch   Lisa I. • Cocoa , FL • December 13, 2015

Got the model number off the dryer. Looked it up online. I wanted name brand replacement part. Found this wonderful AppliancePartsPros.com. Looked up my model number, went to top control panel section, ordered the Start Switch. In ONE DAY I received it. Removed the back part of my dryer. Easily removed the broken part. (I did watch a video online). Put on the new Start Switch. Instead of ordering a new knob. I removed a knob from the dryer that I don't use. It turns a buzzer on or off to let... Read more

More
$59.95
Compare At:
$71.34
You Save:
$11.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Light/Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 216822900

The Door switch is an OEM replacement part for Frigidaire refrigerators. This part turns the light on/off as the door opens and closes.

Causes of a faulty door switch include normal wear of electrical contacts from repetitive on/off cycles. Moisture exposure may potentially corrode internal connections.

Symptoms of a bad light/switch include:

  • The interior light fails to turn on when the door is opened
  • The light stays on when the door is closed, leading to potential overheating
  • An impact on the refrigerator’s temperature regulation due to the switch not signaling the door's closure

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Frigrdaire up right alarm beeping door ajar   Thelma L. • Zirconia , NC • January 08, 2016

REPLACED THE LIGHT/LAMP SWITCH. Read more

More
$57.22
Compare At:
$68.66
You Save:
$11.44

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Microwave Door Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509460

The Door Switch is an OEM part for Frigidaire microwaves. It plays a crucial role in the microwave's overall function by detecting when the door is open or closed. The door switch communicates this information to the control board, enabling it to safely operate the microwave's electronic components and magnetron when the door is shut.

Symptoms of a bad door switch include:

  • The microwave failing to operate or function properly with the door closed  
  • Inability to start or pause operation when the door is opened
  • Error codes or failure messages appearing on the display related to door functionality

Causes of a bad door switch can be wear and tear over time, damage from repeated opening and closing of the microwave door, or impact from accidental mishandling. 

This OEM replacement is also compatible with Electrolux, Admiral, Crosley, White-Westinghouse, and Kenmore models.
 

Do-It-Yourself Stories from Customers like You Sears Kenmore elite blowing main circuit breaker when trying to start   Dennis S. • Bucyrus , OH • November 17, 2018

Check fan operation and was OK. Everything else worked except when microwave was started for a cycle. I looked around on internet and found someone had trouble with the door switches. I started to check door switches and found one shorted. I replaced both lower door switches and it took care of problem. Read more

More
$51.30
Compare At:
$61.05
You Save:
$9.75

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Spark Ignition Switch & Harness Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 316580615

The Spark Ignition Switch & Harness Assembly is an OEM part for Frigidaire gas ranges. It is responsible for igniting the burner to produce a flame when the burner knob is turned on.

Causes of ignition failure include worn contact points, damaged wiring, cracked ceramic insulators, and loose connections.

Symptoms of a faulty spark ignition switch and harness include:

  • Burners not igniting
  • Burners igniting with delay
  • Burners igniting but flame is low or uneven
  • Ticking noises near the burner area

This OEM replacement assembly is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas range models that use the same ignition system.

Do-It-Yourself Stories from Customers like You Range sparker wire harness replacement   Brian E. • Portland , OR • April 20, 2020

After watching Simon's helpful and well-presented video, I fixed this with my son. Everything went smoothly! We really loved Simon's, "Ok, time to cook now. No more excuses!" Read more

More
$75.71
Compare At:
$90.09
You Save:
$14.38

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Igniter Switch Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 316580611

The Igniter Switch Assembly is an OEM part for Frigidaire cooktops and ranges. It is responsible for generating the spark needed to ignite the gas burners when you turn the control knobs. This assembly ensures that the burners light quickly and efficiently, providing the flame needed for cooking.

Causes of a bad igniter switch assembly can include wear and tear from frequent use, electrical issues, or damage from spills or moisture. When the igniter switch assembly malfunctions, it can prevent the burners from igniting or cause inconsistent sparking.

Symptoms of a bad igniter switch assembly include:

  • Burners not igniting
  • No clicking sound when the control knob is turned
  • Inconsistent or weak sparking
  • Burners igniting only intermittently

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Yes   Willie C. • Baltimore , MD • January 25, 2019

Thanks, I’ follow the instructions on YouTube and my repairs was completed. Read more

More
$64.95
Compare At:
$77.29
You Save:
$12.34

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Dispenser Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 241689106

The Dispenser Switch is an OEM replacement part for Frigidaire refrigerators. It is a component that controls the operation of the water and ice dispenser, allowing users to conveniently access chilled water, cubed ice, or crushed ice from the refrigerator door.

Symptoms of a bad dispenser switch:

  • Failure of the water or ice to dispense when the lever or button is activated
  • Erratic or inconsistent dispensing behavior
  • Water or ice continuously dispensing without user input
  • Leaks or moisture around the dispenser area

Causes of a bad dispenser switch can include mechanical wear and tear, electrical malfunctions, or physical damage due to mishandling or impact.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

Do-It-Yourself Stories from Customers like You Water dispensor would only work when you depressed the paddle then brought back to find the "sweet spot"   Joseph V. • Bargersville , IN • January 16, 2026

I had the original sensors in my Frigidaire, which were now about 18 years old. The water dispenser would work, but I would have to push in the lever and then draw it back until it found that "sweet spot." I finally got annoyed enough with the problem that I looked online. I almost purchased the dispenser actuator (the paddle), and glad I didn't because it was not the problem. Unless your lights are out, or it broke, the culprit will be these little dispenser switches which get pressed... Read more

More
$11.95
Compare At:
$14.10
You Save:
$2.15

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Surface Unit Switch Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303935086

The Surface Unit Switch Kit is an OEM part for Frigidaire ranges. It controls the power and heat levels to the surface burners on the cooktop, allowing you to adjust the temperature for cooking. This kit typically includes the necessary components to replace a faulty switch and restore proper functionality to the burners.

Causes of a bad surface unit switch can include electrical malfunctions, wear and tear from regular use, or damage due to spills or impacts. A faulty switch can prevent the burner from heating correctly or at all.

Symptoms of a bad surface unit switch include:

  • Burners not heating up or heating unevenly
  • Inability to adjust the burner temperature
  • Burners not turning on or off properly
  • Sparks or electrical odors near the switch

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You My kenmore electric range burners were constantly on high   Eric M. • Long Beach , CA • January 23, 2017

When I called customer service your representative at Appliance Parts Pros was able to help me diagnose the problem and order the two parts that I needed. both parts arrived the next day and with helpful tutorial videos I was able to replace both the Surface Unit Switch and the Universal Element in less than 45 minutes. Thanks so much for the great service and the money you saved me. Read more

More
$42.95
Compare At:
$51.11
You Save:
$8.16

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Water Level Float Switch Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 154773201

The Water Level Float Switch Assembly is an OEM replacement part for Frigidaire dishwashers. It uses a floating switch design to accurately sense water levels filling and draining during cycles. Proper level detection allows for optimized wash and rinse action and water volume control.

Causes of a bad float switch assembly can include wear and tear over many years of use, interfering with free float movement. Mineral or scale deposits may accumulate on float components, inhibiting functionality. Physical damage from impact could introduce leaks.

Symptoms of a bad float switch assembly include issues such as:

  • Inability to properly detect water levels
  • Long fill or drain times
  • Failure to fill or drain completely
  • Potential overflow or standing water issues
  • Error codes pointing to level sensor faults

This OEM Frigidaire replacement part is also compatible with some Electrolux, Westinghouse, and Kenmore dishwashers.

This part fixes the following symptoms
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Dishwasher would not fill   Eric D. • Indianapolis , IN • March 02, 2020

Replacing the inlet valve solved the problem. The old valve was somehow clogged with white sediment. I probably could have taken it off and cleaned it out if I'd known, but replacing the valve was much easier. Took about half an hour to repair. Video walk through was extremely helpful. Great to have a working dishwasher again! Read more

More
$54.26
Compare At:
$64.57
You Save:
$10.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Surface Burner Infinite Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 903136-9020

The Surface Burner Infinite Switch is an OEM part for Frigidaire ranges. This switch is responsible for controlling the heat output of the surface burners on your range. By adjusting the infinite switch, you can set the burner to different heat levels, allowing for precise cooking control.

Common causes of a bad infinite switch include electrical failures, internal component wear, or physical damage to the switch mechanism.

Symptoms of a bad surface burner infinite switch include:

  • Burner not heating up
  • Burner only working at one heat level
  • Burner not turning off
  • Inconsistent or fluctuating heat levels

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Burner was hard to turn on/off and almost impossible to adjust   Clark A. • Austin , TX • September 01, 2014

The problem seemed to be with the switch so I watched a few youtube videos to learn more about how ranges work. After locating the correct replacement switch I ordered it on-line around 10 pm Tuesday night. The new switch arrived Thursday morning at about 10 am and I had my range back up and working like new in less that 30 minutes. The hardest part was figuring out how to remove the slide in panel to access the switch. There were plastic washer/nuts behind each know which I was able to... Read more

More
$78.41
Compare At:
$93.31
You Save:
$14.90

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Frigidaire Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 903136-9010

The Switch is an OEM part for Frigidaire ovens. This component is responsible for controlling the flow of electricity to various functions of the oven, such as the bake and broil elements, ensuring the oven operates correctly according to the selected settings.

Causes of a bad switch can include wear and tear from frequent use, electrical surges, or physical damage from impact or exposure to moisture.

Symptoms of a bad switch include:

  • The oven not turning on or responding to control inputs
  • Inconsistent heating or temperature control issues
  • Certain oven functions not working, such as the bake or broil elements
  • The switch feeling loose or sticking when turned

This OEM replacement is also compatible with Electrolux, Gibson, Tappan, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Burner switch was not turning the burner off   Mary K. • Dublin , GA • July 13, 2014

We cut the power, took the control panel off, got the burner switch number from the original part, and ordered a new one. We were a little worried at that point, because your website offered a "replacement" part, with a different number than the original. However, we put the model number into your double check feature and were assured that we were getting the right part. The part arrived in two days and frankly we were still worried, because the new part was slightly larger than the original.... Read more

More
$72.71
Compare At:
$86.52
You Save:
$13.81

IN STOCK
Ships Today Guaranteed
Add to Cart

If you're in need of Frigidaire switch replacement parts, you're in the right place. These parts play a crucial role in maintaining the performance and functionality of your appliances, ensuring that everything works as it should.

Frigidaire switches are essential components in many household appliances like washers, dryers, and refrigerators. They help control various operations, making sure that the appliance runs smoothly. With high-quality Frigidaire switch replacement parts, you can easily restore or maintain the efficiency of your appliances. It's always a good idea to opt for OEM replacement parts, as these are specifically designed to fit and function perfectly with your Frigidaire appliances, guaranteeing compatibility and durability.

Whether you're dealing with a washer, dryer, or any other major appliance, finding the right Frigidaire switch replacement parts can make all the difference. Rest assured, quality parts are readily available to help keep your appliances running like new.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store