Frigidaire Belt

The Dryer Drum Belt is an OEM replacement part designed for use with Frigidaire dryers. This critical component is responsible for turning the drum of your dryer, allowing your clothes to tumble freely and dry evenly. 

Causes of a bad Dryer Drum Belt can include wear and tear from regular use, overloading the dryer, which puts extra strain on the belt, or exposure to excessive heat, which can cause the belt to become brittle and break.

Symptoms of a bad Dryer Drum Belt include:

• The dryer motor running but the drum not turning
• Unusual noises, such as thumping or squealing, coming from the dryer when it is running
• The dryer not starting at all, in some cases

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models, ensuring a wide range of users can benefit from its reliable operation.

NOTE: Please note that this dryer drum belt is sold individually. Any additional parts or hardware will require additional purchases.

The Washer Drive Belt is an OEM part for Frigidaire washing machines. This belt connects the motor to the drum, enabling the drum to rotate during the wash and spin cycles. It ensures the proper transfer of power from the motor to the drum, allowing the washer to agitate and spin effectively.

Common causes of a bad drive belt include normal wear and tear, overloading the washer, or a misaligned drum that puts extra strain on the belt.

Symptoms of a bad washer drive belt include:

• The washer drum not spinning or agitating
• A burning smell during operation
• Unusual noises such as squealing or grinding
• The washer stopping mid-cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Drive Belt is an OEM replacement part for Frigidaire dryers. It plays a crucial role in transferring the rotational motion from the dryer's motor to the drum, enabling the tumbling action necessary for drying clothes.

Symptoms of a need to replace the drive belt include:

• The dryer drum not turning or rotating during cycles
• Loud thumping or squeaking noises coming from the dryer
• Visible wear, cracks, or fraying on the existing belt

Causes of a faulty drive belt can include general wear and tear over extended use, exposure to high temperatures or lint buildup, physical damage from foreign objects, or manufacturing defects in the belt material or construction.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryer models. 

The Drum Drive Belt is an OEM part for Frigidaire dryers. It connects the drum to the motor, enabling the drum to rotate and tumble the clothes during drying cycles. The belt is 54 inches long and 5/8 inches wide

You should replace this drum drive belt if it becomes worn out, frayed, or broken due to the high heat and friction involved in the drying process. Additionally, improper loading or overloading of the dryer can cause the belt to stretch or snap.

Symptoms of a bad drum drive belt include:

• Dryer drum not turning
• A loud thumping or squealing noise during operation
• Dryer stopping mid-cycle
• Clothes remaining wet after the drying cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This washer drive belt links the motor to the drum pulley so the machine can tumble and spin. Replacing a broken or stretched belt restores smooth, reliable drum rotation during wash and spin cycles.

• Transfers motor power to the drum for tumbling and spin
• Worn or broken belts can cause no spin/tumble or intermittent rotation
• Common symptoms: drum won't spin, squealing or thumping noises, burning rubber smell, visible fraying/cracks
• Slipping belt can leave clothes wetter than normal at cycle end

• Disconnect power and turn off water supplies before servicing
• Access the belt from the rear or bottom; remove panels as directed in your model's service information
• Release belt tension at the motor/idler, remove the old belt, and route the new belt over the drum and motor pulleys with ribs properly seated
• Rotate the drum by hand to verify alignment; reassemble and test. Inspect the idler/tensioner and pulleys while open

The Dryer Belt (Flat Style) is an OEM part for Frigidaire dryers. It wraps around the drum, motor pulley, and idler pulley, enabling the drum to spin when the motor is running.  

Causes of a bad dryer belt can include wear and tear from regular use, overloading the dryer, or damage from items getting caught in the drum.  

Symptoms of a bad dryer belt include:

• The dryer drum not spinning
• The dryer making unusual noises
• The motor running but the drum remaining stationary
• Clothes taking longer to dry or not drying at all

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement belt links the drive motor to the appliance's drive system so the drum or tub can rotate during operation. Replacing a stretched, cracked, or broken belt restores proper movement and reduces slippage and noise.

• Transfers motor rotation to the drum or tub to enable tumbling or spinning
• Common symptoms: drum/tub not turning, intermittent movement, or cycle runs but contents don't tumble/spin
• Squealing, thumping, or burning-rubber odor from belt slippage
• Visible fraying, glazing, or cracks on the belt surface

• Disconnect power and allow the unit to cool before servicing
• Note belt routing/tension before removal; take a photo for reference
• Inspect idler/tensioner and motor/drum pulleys; replace worn components to prevent premature belt wear
• After installation, hand-rotate the system to verify alignment and tracking before test run

This drive belt transfers the motor's power to the machine's drive system so the tub or drum can rotate. Replacing a stretched, glazed, or broken belt restores consistent movement and helps eliminate slippage noises and burning-rubber odors.

• Transfers rotation from the motor pulley to the drive/transmission pulley
• Typical symptoms of a worn belt: no spin or weak spin, no agitation, motor runs but tub/drum doesn't move
• Visual signs include cracks, fraying, glazing, or excessive slack

• Disconnect power; turn off water supply before servicing
• Access the belt by removing the appropriate panel; note the belt routing before removal
• Release the tensioner or loosen motor mounts to remove the old belt, then fit the new belt around the pulleys and rotate by hand to seat it
• Confirm proper tracking and clearance before reassembly and test run

The drive belt is an OEM part for Frigidaire electric dryers. It acts as a link, transferring power from the dryer motor to turn the tumbling drum. During each drying cycle, the belt works diligently to rotate the drum and toss clothes in heated air.

Causes of belt failure involve normal wear and tear over time. Stretching, cracking, and dry rot are all contributors. Oiling or overloading the dryer can accelerate belt wear. 

Symptoms of a bad belt can include : 

• The dryer failing to start or stop 
• Excessive noise during operation
• Visible cracks or separation in the belt

This OEM replacement belt is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryers. 

This main drive belt transfers motor power to the appliance's drum/transmission so the tub spins reliably. It replaces a worn or broken belt to restore normal drum rotation and eliminate slipping. What it does:

• Wraps around the motor pulley and drum/transmission to convert motor torque into drum rotation
• Restores normal spin if the drum slips, won't turn, or makes a high-pitched squeal when starting
• Prevents further wear on motor and pulleys caused by a stretched or frayed belt
• Works with the appliance's existing pulleys and idlers to maintain correct tension

• One main drive belt

• Disconnect power (and water, if applicable) before beginning service
• Access panels and routing vary by model—refer to your service manual or belt routing diagram
• Inspect pulleys, idler(s), and drum seals for wear; replace any damaged parts to avoid repeat failure
• After installation, run a short cycle to confirm smooth, quiet operation

This is a replacement drum drive belt that turns the dryer drum so clothes tumble and dry evenly. A direct-fit belt for restoring normal drum rotation and preventing slipping or squealing. What it does

• Wraps around the dryer drum and drive pulley to transfer motor power to the drum.
• Keeps the drum rotating smoothly to ensure even drying and prevent overheating.
• Designed to match OEM fit and length for proper tension and long wear.

• Disconnect power (and gas supply if applicable) before starting any repair.
• Inspect pulleys and idler for wear when replacing the belt; replace any worn parts to prevent repeat failure.
• Follow the dryer's service manual for belt routing and correct tension.

The Drive Belt is an OEM part for Frigidaire washing machines. This part transfers the rotational force from the motor to the drum, enabling the tumbling action during wash cycles.

Causes of a bad Drive Belt include wear and tear over time, exposure to excessive heat or moisture, or physical damage from improper installation or foreign objects.

Symptoms of a faulty Drive Belt include:

• Loud squeaking or grinding noises during the wash cycle
• The drum not spinning or rotating properly
• Slipping or failure to agitate during wash cycles
• Excessive vibrations or shaking from the washer

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.