Frigidaire Wall Oven Parts

Color: chrome. Measures about 18 inches wide by 15 inches deep.

This replacement control knob restores smooth, positive control of your range settings. It fits over the control shaft so you can turn burners or oven functions on and accurately set heat levels, with a clear position indication.

• Attaches to the control shaft to operate burners or oven functions and adjust settings
• Replaces cracked, stripped, or missing knobs
• Helps when the knob falls off, spins without adjusting, or is hard to turn
• Restores clear pointer alignment and a solid, secure feel

• Pull the old knob straight off the shaft; avoid prying on the control panel
• Align the flat/D-shaped opening with the shaft and press firmly until fully seated
• Disconnect power before accessing or servicing any controls behind the panel

This replacement part is a safety valve. This part is found in various types of refrigerators or freezers and is able to ensure that the appliance is running smoothly and safely during use. A new safety valve might be needed if the user notices that the current one is no longer working properly. This may include it having a leak or making unfamiliar sounds. The user should be able to access the back of the appliance to replace or repair this part.This is a genuine OEM replacement part made by Frigidaire, sold individually. The item, made of durable materials, is meant to last a long time.

This replacement motor restores the rotation your appliance relies on to move air or drive a mechanism, bringing normal operation and performance back when the original motor has failed or become noisy. What it does:

• Converts electrical power into controlled shaft rotation to drive the associated component
• A failing motor may cause no movement, intermittent operation, or unusual humming/grinding noises
• Can contribute to reduced performance if the driven part doesn't run as intended
• May present with overheating smell or visible signs of wear on the old unit

• One motor

• Disconnect the appliance from power before servicing
• Note wire locations and connector orientation; transfer any brackets, grommets, or hardware from the old motor
• Handle sheet-metal edges carefully; wear cut-resistant gloves
• After installation, confirm the shaft spins freely by hand before restoring power and testing

This cast-iron range grate provides a stable cooking surface over gas burners so pots and pans sit level for safer, more even cooking. It replaces a chipped, cracked or warped grate to restore stability and proper cookware support. What it does:

• Supports cookware above the burner for even heat distribution and stable cooking
• Replaces broken, warped or damaged grates that cause cookware to wobble
• Helps position cookware so burner flames heat pans correctly
• Durable cast-iron construction resists regular wear from everyday cooking

• Allow the range to cool completely before handling grates; wear gloves if needed for heavy cast iron
• Lift old grate straight up to remove and set the new grate into the cooktop recess so it sits flat and stable
• Clean grates according to manufacturer recommendations; avoid harsh abrasives that can damage finish
• If any burner or cooktop damage is present, verify proper cooktop operation before regular use

Color: Black

Replacement snap-on cap that restores a finished appearance and helps protect underlying components from dirt and accidental contact. Fits original mounting locations to cover exposed hardware and improve appliance safety and aesthetics. What it does:

• Covers and protects exposed hardware, terminals or posts to reduce debris buildup and accidental contact.
• Restores a clean, finished look to panels, trim or appliance edges.
• Helps reduce rattling or vibration noise caused by missing trim pieces.
• Use when the original cap is cracked, broken, missing or when exposed fasteners are visible.

• Always disconnect power (and water, if applicable) before attempting any repair.
• Remove the damaged cap by hand or with a small pry tool; press the replacement cap onto the mounting post until fully seated.
• Avoid excessive force during removal/installation to prevent damage to the mounting post or surrounding trim.
• If mounting posts or clips are damaged, replace those components to ensure a secure fit.

This Main top is the oven's upper cabinet panel that provides the flat surface and structural support for the cooktop area, restoring proper fit and appearance. It replaces a bent, damaged, or corroded top to help the range sit and seal correctly. What it does:

• Replaces the damaged or warped top panel that supports the cooktop and front controls
• Restores a flat, even surface to prevent gaps and improve alignment with adjoining panels
• Helps prevent heat and moisture from reaching internal components through damaged metal
• Commonly replaced when the top shows dents, rust, or mounting-point damage

• One Main top (upper cabinet panel) as shown

• Basic disassembly of the cooktop and control panel is typically required; disconnect power before starting
• Handle edges carefully; metal panels can be sharp
• Keep hardware organized for reassembly; reuse original screws and brackets unless damaged

A replacement igniter with plug for gas ovens and ranges that lights the burner by glowing until the gas ignites. Restores reliable ignition so burners and bake/ broil functions heat properly. What it does

• Glows to ignite gas for oven or range burners so the appliance reaches cooking temperature.
• Commonly used when the oven won't light or takes too long to ignite.
• Replaces a cracked, broken or failed igniter that no longer produces consistent heat.
• Works with the oven's gas valve and control system to start normal heating cycles.

• Disconnect power and turn off the gas supply before starting work.
• Handle the ceramic/glow tip carefully; oils or cracking can cause premature failure.
• Verify connector seating and routing to avoid contact with metal or moving parts.

This is the electronic clock/timer that controls the oven's timekeeping, display, and cooking functions. A failing control can stop bake or broil from working and make the display or keypad unresponsive.

• Governs oven functions such as bake/broil through internal relays
• Provides the time display, kitchen timer, and programmable settings
• Faulty unit can cause no heat, dead or dim display, unresponsive buttons, or error codes
• Intermittent beeping or failure to start/stop cycles can also indicate a bad control

• Disconnect power at the breaker before servicing—high voltage present
• Take a photo of wire locations; transfer connectors one at a time to the new control
• Handle the board carefully and avoid static discharge; do not touch relay contacts
• After installation, restore power and set the clock before testing oven functions

Electronic clock timer that replaces the oven's front-console clock and timer functions, restoring accurate time display and timed cooking features. Fits common Frigidaire ranges and wall ovens that use a standalone clock/timer assembly. What it does:

• Provides the oven clock display and the user timer/countdown functions.
• Enables timed cook and delay-start operations that rely on the clock/timer.
• Replaces a blank, flickering, or garbled clock display.
• Fixes unresponsive clock/timer buttons or timers that won't count down.

• Disconnect power (unplug or shut off breaker) before servicing the control panel.
• Access typically requires removing the console/control panel and unplugging a wire harness; keep fasteners/trim organized.
• Handle the assembly carefully to avoid static or physical damage to the display and connectors.

This heat-resistant insulation helps contain oven heat and shield surrounding components. Replacing worn insulation supports faster, more consistent preheating, steadier baking temperatures, and cooler exterior panels for safer, more efficient operation. What it does:

• Wraps/lines the oven cavity or panels to reduce heat loss and protect nearby wiring and controls
• Helps the oven preheat efficiently and maintain consistent cooking temperatures
• Limits heat transfer to exterior panels and surrounding cabinetry
• Common signs of failure: longer preheat times, temperature swings, unusually hot sides/back, or insulation that is burnt, brittle, soaked, or missing

• 1 insulation piece

• Disconnect power and, if applicable, shut off gas before servicing
• Access typically requires removing rear/side panels or sliding the unit out; take photos to aid reassembly
• Wear gloves and a dust mask; handle gently—do not compress insulation and keep clear of sensors/wiring
• Re-secure with original clips/tape, reinstall panels, then test preheat and check for abnormal exterior heat

This safety valve controls and shuts off gas flow to the appliance burner assembly to help prevent unintended gas delivery. It restores safe operation when a failed valve is replaced and the ignition system is working properly. What it does:

• Regulates and stops gas flow to the burner/oven when the valve is closed
• Prevents gas from reaching the burner when ignition is off or unsafe conditions occur
• Common symptom fixes: no heat, continuous clicking with no ignition, or a persistent gas smell when appliance is trying to light
• Works with the appliance's ignition and pressure systems to maintain safe fuel delivery

• Turn off gas and power at the appliance before starting work
• Use appropriate tools and follow the appliance service manual; fittings may require thread sealant rated for gas
• After installation, check all connections for leaks with a non-corrosive leak detector or soapy water; do not use an open flame

This switch/fuse kit replaces a worn or failed control switch and associated fuse to restore reliable power control. It provides the exact components needed to address common start and power interruptions. What it does:

• Replaces a faulty control switch to restore on/off or cycle control
• Replaces the protective fuse to stop power loss from a blown fuse
• Helps resolve no-start, intermittent power, or control failures
• Restores proper electrical continuity for safe operation

• Disconnect power to the appliance before starting any work
• Handle electrical components carefully and avoid metal contact with terminals
• Verify correct part orientation and secure all connections per OEM guidance

Replacement machine screw used to secure appliance panels and internal components, restoring a stable fit and reducing rattling. Matches a 10-32 thread with a 17/32-inch length for original fastener locations. What it does:

• Fastens panels, trim pieces, and internal brackets; a missing or damaged screw can cause loose panels or rattling noises.
• Secures knobs, control housings and small assemblies to prevent wobble or misalignment.
• Restores proper fit for components so doors and access panels sit evenly and function reliably.

• Disconnect power (unplug or shut off circuit) before accessing components.
• Use the correct driver and tighten by hand; avoid overtightening to prevent stripped threads or cracked plastic.
• Keep any original washers or clips and reinstall them with the screw.