Frigidaire Wall Oven Parts

This hinge kit restores a refrigerator door's secure attachment so the door opens, closes and seals properly. Install to correct sagging, misalignment or noisy pivot points and help maintain consistent cabinet closure. What it does:

• Secures the appliance door to the cabinet and provides the pivot point for smooth movement
• Restores proper door alignment to help improve sealing and reduce air gaps
• Replaces worn or bent hinge hardware that can cause door sagging or rubbing
• Reduces creaks, binding or uneven door movement when operating the door

• Disconnect power to the appliance and remove food from the door before starting
• Support the door during removal and installation to prevent drops or damage
• Tighten hardware securely but avoid over-torquing; verify door alignment and seal after installation
• Follow OEM instructions for your model before ordering

The Knob is an OEM part for Frigidaire ranges. It is responsible for controlling the various functions and settings of your range, allowing you to adjust the temperature and operate the burners.

A bad knob can occur due to wear and tear over time, accidental damage, or exposure to heat and moisture. Signs of a faulty knob include difficulty in turning, a loose or wobbly fit, or the control markings wearing off.

Symptoms of a bad knob include:

• Difficulty in turning or adjusting 
• The knob feeling loose
• Cracks or discoloration 

Replace your worn-out or damaged range knob with this genuine OEM Frigidaire part to restore your range. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Color: White

This replacement control knob restores user control of your range or oven by turning temperature and function settings smoothly and visibly. It's a direct-fit style knob used on many Frigidaire cooktop and oven models. What it does

• Provides a secure grip to adjust burner or oven settings.
• Replaces cracked, stripped, or missing knobs that prevent accurate control.
• Restores tactile click and alignment for clear setting indication.
• Helps prevent accidental setting changes with a snug fit on the control shaft.

• One control knob as pictured.

• Pull the old knob straight off the control shaft and push the new knob on until fully seated.
• Confirm the shaft and knob orientation match so indicator lines align with control markings.
• Unplug the appliance or shut off power at the breaker before accessing internal controls when disassembly is required.
• If the knob feels loose or won't seat, inspect the control shaft for damage—do not force the knob.

This replacement latch assembly secures the refrigerator or freezer door to ensure proper closure and reliable operation. It restores the door catch so the appliance can maintain an effective seal and help prevent cooling loss. What it does:

• Secures the door to keep it closed and aligned
• Replaces a broken, bent, or worn latch that prevents proper latching
• Helps reduce warm air entry caused by a door that won't stay shut
• Works as the mechanical catch that engages the door striker

• Disconnect power (unplug appliance) before servicing to avoid shock or injury.
• Remove the inner door panel or access trim as needed to reach the latch; keep screws and fasteners organized.
• Align the latch with the door striker and tighten screws securely without over-torquing.
• Test door operation several times after installation to ensure proper engagement and seal.

The Gas Burner is an OEM replacement part for Frigidaire gas wall ovens and cooktops. It facilitates safe and efficient cooking by providing a controlled source of flame. 

Symptoms of a bad gas burner include: 

• Uneven or unpredictable heating across the burner surfacea
• Flames not igniting or not staying ignited
• Burner components cracking, rusting, or becoming discolored
• Gas smells coming from the burner area

Causes of gas burner issues can be wear over time, contamination of ports/orifices affecting gas flow, or damage to ignition components. Ceramic burner materials may also degrade with heavy use or exposure.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

The Surface Burner Base is an OEM part for Frigidaire gas ranges. It provides a stable foundation and housing for the range's burners. Each burner base has a molded indentation to securely hold the burner assembly in place while cooking. 

Causes of a bad Surface Burner Base can include warping or distortion from overheating, cracks or punctures from impact or mishandling, or damage from corrosion over time.

Symptoms of a bad Surface Burner Base include: 

• Burners wobbling or moving out of position during use
• Gas or liquid leaks around burner housing 
• Irregular or uneven cooking performance 
• Loose, damaged, or missing burner assemblies

This genuine OEM Frigidaire base is also compatible with some Electrolux, Gibson, Kelvinator, and Kenmore models.

A replacement evaporator fan motor that circulates cold air across the evaporator and through the fresh food and freezer compartments to help maintain even temperatures and consistent cooling performance. What it does:

• Powers the evaporator fan to move cold air through the refrigerator and freezer.
• Restores airflow when a failed fan motor causes uneven cooling or warm spots.
• Stops continuous frost build-up on the evaporator caused by poor or no airflow.
• Eliminates loud grinding, buzzing, or rattling noises coming from the freezer area.

• Disconnect power to the appliance before attempting any repair to avoid electrical shock.
• Access typically requires removing interior panels or the evaporator cover; keep track of screws and clips.
• Handle the fan blade carefully and test operation after restoring power.

This oven temperature probe detects the oven's internal temperature and delivers readings to the control board so the oven can regulate heat more accurately for consistent cooking results. Ideal when your oven is giving incorrect temperature feedback. What it does:

• Measures internal oven temperature and sends the signal to the oven control or thermostat.
• Helps the control board maintain set temperatures for even baking and roasting.
• Common symptoms that indicate a failing probe: oven runs too long, doesn't reach set temperature, or produces uneven cooking.
• Replaces a damaged or erratic probe that causes incorrect temperature readings.

• Always disconnect power at the breaker or unplug the appliance before servicing.
• Access typically requires removing the oven access panel or control panel; handle the connector and wiring gently.
• Verify connector orientation before installation; secure wiring away from heating elements.

A replacement electronic clock and timer assembly that restores timed cooking, clock display and audible alerts for affected ovens. Helps return normal oven scheduling and countdown functions when the original timer/control fails. What it does:

• Replaces the oven clock/timer control that manages time display, timed bake/clean cycles and end-of-cook alerts.
• Common symptoms: no clock display, timer not advancing, timed cooking won't start or stop, or intermittent control/display behavior.
• Interfaces with the oven's control system to enable countdown timers, delay-starts and audible beeps for finished cycles.

• Always disconnect power at the breaker before starting any repair to avoid shock or injury.
• Handle the display and connector ribbons carefully; avoid pulling on wires or bending contacts.
• Verify connector fit and orientation before restoring power; recheck all wiring against the appliance wiring diagram.

This spacer sets the correct gap between mating parts in your appliance's assembly, preventing rubbing and misalignment. Replace a missing or worn spacer to restore a solid fit, reduce noise, and protect surrounding components.

• Maintains proper spacing between components for correct alignment and operation
• Reduces metal-to-metal contact, squeaks, and premature wear
• Helps fasteners and panels seat securely
• Typical symptoms when failed: loose or rattling parts, uneven gaps, or visible wear marks

• Disconnect power; for gas models, shut off the gas. Allow the appliance to cool completely.
• Access the assembly per your model's diagram; note the original orientation/stack-up before removal.
• Reuse original fasteners if serviceable; hand-start threads and tighten snugly to avoid damaging the spacer.
• Verify alignment and clearances before fully reassembling. Quantity and location vary by model.

This replacement control knob restores a worn, cracked, or missing selector on your range or oven so you can set temperatures and function settings with a secure, easy-to-grip control. Fits original shaft style for a direct swap. What it does:

• Replaces a damaged or missing range/oven control knob for reliable temperature and function selection
• Provides a firm grip and clear pointer for accurate setting adjustments
• Helps stop slipping, wobbling, or intermittent contact caused by worn knobs
• Restores the original look and operation of the front control panel

• Remove power to the appliance before replacing knobs (unplug or shut off circuit breaker)
• Pull off the old knob straight from the control shaft; push the replacement knob fully onto the shaft until seated
• For gas appliances, ensure controls are in the OFF position before testing

This rectifier converts incoming AC power to DC for the appliance's control circuits, restoring correct electrical supply to electronic components so controls and powered features can operate properly. What it does:

• Converts alternating current (AC) from the mains to direct current (DC) used by control boards and electronics.
• Restores power to electronic controls, displays, and powered dispensers when the rectifier has failed.
• Common symptom: control panel, dispenser, or ice maker loses power or becomes unresponsive.
• Needed when intermittent electrical problems occur that trace to the power-conversion stage.

• One rectifier (single part as sold)

• Disconnect power to the appliance before attempting any service to avoid shock hazard.
• Handle the rectifier and control boards carefully; avoid static discharge and physical damage.
• Verify fault with a multimeter and wiring diagrams or service manual before replacement.

The Knob is an OEM part for Frigidaire electric ranges. It is a control knob designed to easily select cooking functions and temperature settings on the appliance.

Causes are related to general wear from frequent rotating and adjusting over many cooking cycles. Exposure to heat, moisture or cleaning chemicals speeds degradation.

Symptoms of a faulty knob may include:

• Difficulty adjusting or gripping due to worn knurling
• Knob detaching or controls becoming inoperable
• Loose, cracked or broken connections at the base

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This control knob replaces a worn, cracked, or missing range/oven control knob so you can select heat settings easily. It fits splined control stems and restores a secure, tactile grip for temperature and function changes. What it does

• Replaces a damaged or missing control knob used to choose oven or burner settings
• Provides a secure fit on a straight (linear) splined control shaft for reliable selection
• Restores smooth, positive rotation and tactile feedback when adjusting controls
• Helps resolve symptoms like a loose, cracked, or non-engaging knob that won't turn properly

• Disconnect power (or gas supply where applicable) before removing or installing parts
• Remove the old knob by pulling it straight off the control shaft; align splines and push new knob firmly onto the stem
• Verify the knob fully seats and correctly selects all control positions before normal use