Frigidaire Wall Oven Parts

A heavy-duty cast-iron cooktop grate that supports cookware above gas burners for stable, even heating. Replaces worn or damaged grates to restore pot stability and proper burner clearance. What it does:

• Supports pots and pans over the burner for safe cooking
• Maintains proper clearance for even flame contact and heat distribution
• Restores stability when original grate is cracked, warped, or missing
• Resists high heat and everyday wear for long-lasting use

• One cast-iron cooktop grate

• Allow cooktop to cool completely before removing or installing the grate
• Position the grate securely on the burner supports; no tools required in most models
• Clean with warm soapy water and avoid abrasive cleaners that can damage the finish
• Do not use if the grate is cracked or severely damaged — replace to prevent instability or safety hazards

This main top is the flat cooktop surface that mounts over a range's burner box to provide a stable, finished cooking surface and protect internal components from spills and debris. It restores a level, secure area for burners and cookware. What it does:

• Covers and protects the range's internal burner box and wiring from spills and food debris
• Provides a stable, level surface for burner grates and cookware
• Helps maintain proper airflow and fit for burner components
• Replaces warped, dented, or corroded tops that can interfere with burner alignment or cookware stability

• Disconnect power to the appliance before beginning any service
• Remove burner grates, knobs and other removable components to access mounting screws
• Handle carefully to avoid sharp edges; lift and set into place, aligning mounting holes before fastening

This electronic control board manages a range of appliance functions, replacing a failed or damaged main control to restore user controls and cycle sequencing. It provides reliable command and timing for the unit's features. What it does:

• Receives user inputs and runs the appliance's control programs and timed cycles
• Switches relays and signals to heaters, motors, valves, and lights as required
• Can cause symptoms such as unresponsive controls, incorrect cycles, intermittent operation, or error codes when faulty
• Restores normal electronic control and sequencing when installed correctly

• One replacement electronic control board

• Disconnect power before beginning work to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Follow the appliance service manual for proper wiring and mounting

This broil burner ignitor lights the oven broil burner so the broiler can heat reliably for browning and broiling. It provides a direct replacement for a failed or cracked ignitor to restore broil operation. What it does

• Heats and glows to ignite the oven broil burner safely
• Commonly replaces an ignitor that won't glow or won't light the broil flame
• Helps stop intermittent broil operation or a broiler that won't start
• Direct-fit replacement when the original ignitor is damaged or worn

• One broil burner ignitor

• Disconnect power and shut off gas supply before starting any repair
• Handle the ceramic/glass element carefully—it's fragile and can break if dropped or flexed
• Basic hand tools are usually required; follow manufacturer instructions for proper wiring and mounting

This main top assembly is the finished cooktop surface that supports burners and controls while protecting internal components. It restores a flat, secure surface for safe cooking and proper burner alignment. What it does:

• Covers and protects the range's internal components under the cooktop
• Provides mounting/seat locations for surface burners, grates, and trim
• Restores proper burner alignment and prevents debris from entering the cabinet
• Helps reduce heat or smoke caused by damaged or warped tops

• Disconnect power to the appliance before starting any work
• Remove burner grates, knobs and any trim pieces before replacing the top
• Handle the top carefully—edges can be sharp and finish can be easily scratched

This safety valve controls and shuts off the flow of gas to the appliance, helping the cooktop or oven heat safely and reliably. It replaces a failed valve to restore proper gas control and safe operation. What it does:

• Regulates gas flow to the appliance's burner assembly and/or pilot circuit
• Stops gas flow if the valve or control circuit fails, preventing unsafe leaks
• Common symptom: appliance won't heat or burners won't light despite power to the igniter
• Common symptom: intermittent heating or unit shuts off unexpectedly during operation

• One safety valve

• Turn off gas supply and disconnect power before servicing
• After installation, check all gas connections for leaks and verify proper ignition and shutoff operation
• Do not attempt repair if you smell gas; evacuate area.

This control knob restores a clean look and precise feel to your appliance's user controls. Replace a cracked, stripped, or missing knob to easily select settings again without slipping or wobbling.

• Attaches to the control shaft to operate a switch, thermostat, or valve.
• Provides a secure grip and clear pointer for setting selection.
• Replaces knobs that are loose, cracked, missing, or stripped and won't engage.
• Helps ensure the control turns smoothly to the desired position.

• Disconnect power to the appliance before servicing.
• Pull the old knob straight off the shaft; do not pry sideways.
• Align the new knob with the control shaft and push straight on until fully seated.
• If your original knob used a separate insert/clip, transfer it to the new knob if applicable.
• The pointer aligns with the panel markings and the control operates normally.

This electronic clock timer replaces the control module that manages oven clock, timer and timed cooking features so your range keeps time and uses delayed or cook-time functions reliably. What it does

• Controls the oven clock and kitchen-timer display so time and countdowns are visible.
• Enables delayed start and cook-time functions used for timed baking/roasting.
• Does not include mechanical knobs or separate keypads unless specified on the product page.

• One clock/timer control module as shown.

• Disconnect power to the appliance before beginning any service to avoid electrical shock.
• Handle the display and glass panel carefully to avoid scratching or cracking.
• Verify connector orientation and seat wiring harness fully; match part number before installation.

This handle assembly replaces a broken, cracked, or missing refrigerator door handle so the door opens and closes securely and looks finished. Durable molded construction matches the original fit and lever action. What it does:

• Provides the gripping surface and mounting points to open and close the refrigerator door
• Restores proper door control when the original handle is cracked, loose, or detached
• Keeps the door aligned with its latch area for smooth operation
• Prevents hand contact with damaged edges and improves cabinet appearance

• Unplug the appliance or switch off power before beginning work to avoid injury
• Remove any trim or screws holding the old handle; keep fasteners if they are undamaged and listed for reuse
• Align the new handle with the mounting bosses and fasten securely without over-tightening to avoid cracking the plastic
• If the handle uses hidden clips or adhesive trim, verify clip engagement and door operation before finishing

This smooth-top glass is the replacement cooktop surface that restores a flat, easy-to-clean cooking area and protects the underlying burners and components. Ideal when the original glass is cracked, scratched, or otherwise damaged. What it does:

• Replaces damaged or broken cooktop glass to restore a smooth cooking surface
• Provides a sealed, easy-to-wipe surface that helps contain spills and debris
• Maintains correct spacing and protection for the heating elements beneath the glass
• Helps eliminate rattling or uneven cooking caused by a warped or broken top

• Disconnect power to the range before starting work to avoid shock risk
• Use proper supports and soft padding to prevent chipping during removal/installation
• Verify alignment and secure mounting to avoid stress points that can cause cracking

This cast cooktop grate supports cookware above gas burners, providing a stable cooking surface and directing heat where you need it. It replaces a worn, cracked, or misshapen grate to restore safe, even cooking performance. What it does:

• Supports pots and pans over a gas burner for stable cooking
• Helps direct flame and heat for consistent cooking results
• Replaces cracked, warped, or chipped grates that cause wobbling or uneven support
• Prevents cookware from making direct contact with burner heads

• Allow burners and grate to cool completely before handling.
• Lift old grate straight up; align new grate over burner and set into place—no tools typically required.
• Use caution: grates can be heavy and have sharp edges; wear gloves if needed.
• Do not modify the part; if fit or performance seems wrong, verify correct part number.

This LP conversion kit converts a compatible natural-gas range or cooktop to run on liquid propane, restoring correct fuel flow and burner performance for homes using bottled propane. It provides the parts needed for proper gas type change. What it does:

• Replaces or adjusts burner fuel delivery so the appliance operates safely on liquid propane
• Restores correct flame characteristics and heat output after conversion
• Helps resolve symptoms like burners that burn poorly, produce yellow or sooty flames, or have reduced heat on the wrong gas type
• Supports safe operation by allowing proper jet/orifice sizing and regulator settings for LP

• Conversion kit components required to convert a natural-gas range or cooktop to liquid propane

• Conversion must follow the appliance's OEM instructions exactly; keep the manufacturer's supplied procedure and torque/adjustment notes
• Require basic tools; some kits need orifice removal/installation and regulator adjustment
• Shut off gas supply and disconnect power before starting work; check for leaks after conversion using a soap solution

A replacement hex-head screw used to secure appliance regulator brackets and similar small components. Restores proper fastener fit so panels and brackets stay firmly attached. What it does

• Fastens regulator bracket and related sheet-metal components
• Provides a secure threaded connection for components where an 8-18 thread is specified
• Helps eliminate looseness or rattling caused by a missing or damaged screw
• Matches the nickel/chrome finish commonly used on interior mounting locations

• One hex head screw (8-18 x 3/8), nickel finish

• Intended for use where an 8-18 x 3/8 hex screw is specified by the manufacturer
• Tighten to snug; avoid over-torquing which can strip sheet-metal threads
• Turn off power to the appliance before accessing internal components
• If the original screw used a lock washer or threadlocker, replace or reapply as appropriate

This electronic clock timer assembly controls the oven clock and timed cooking functions so you can set cook times, delays and use the timer/countdown features. It replaces a faulty control module to restore timer and display operation. What it does:

• Shows and keeps the oven clock time; allows setting delayed start and timed cook cycles
• Operates the oven's timer/countdown features and audible alerts
• Responds to front-panel touch pads/buttons for programming and control
• Common symptom: blank or unresponsive display, clock not keeping time, or timer functions not working

• One electronic clock timer/control assembly

• Disconnect power to the appliance before starting any work to avoid shock
• Handle the display and control board carefully; avoid touching circuit traces and use anti-static precautions if available
• Installation typically requires removing the control panel or console