Frigidaire Washer Dryer Combo Control Board

The Washer Timer is an OEM part for Frigidaire washing machines. It controls the sequence of operations in the washing machine, including filling, washing, rinsing, and spinning. By managing the timing of these cycles, the timer ensures the washer operates efficiently and effectively.

Causes of a bad washer timer can include electrical malfunctions, wear and tear from regular use, or physical damage to the timer mechanism. Power surges, exposure to moisture, and accidental impacts can also lead to timer failure.

Symptoms of a bad Washer Timer include:

• Washer not advancing through cycles
• Machine getting stuck on a single cycle
• Incorrect timing for washing, rinsing, or spinning
• Washer not starting or completing a cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This dryer timer is the cycle control that advances your dryer through Timed and Auto Dry settings. Replacing a failed timer restores proper cycle progression, start/stop, and end-of-cycle shutoff.

• Advances the cam and internal contacts to move the dryer through heat, motor, and cool-down steps
• Governs run time on Timed Dry and Auto Dry cycles
• Routes power to the correct circuits in sequence; a failed timer may not advance or may stop early
• Common symptoms include timer knob not moving, dryer running indefinitely, or not starting on certain settings

• Disconnect power; for gas models, also shut off gas
• Remove knob/dial, open the console, and unmount the timer
• Label or photograph wiring; transfer wires one at a time to the new timer
• Reassemble and test both a Timed Dry and an Auto Dry cycle

This dryer timer controls and advances the cycle you select, routing power to the correct components and shutting the dryer off at the proper time. Replacing a worn timer restores consistent cycle timing and end-of-cycle shutoff.

• Controls cycle selection and duration
• Advances the dial through the program and turns the dryer off at the end
• Routes power to dryer components at the correct times during the cycle
• Signs of a failing timer may include: cycle not advancing, running indefinitely, stopping early, or erratic timing

• Disconnect power; for gas dryers, also shut off the gas supply
• Remove the control knob and access the console to unmount the old timer
• Label or photograph wiring; move terminals to the new timer one at a time to avoid miswiring
• Align the timer shaft with the dial, secure the timer, and test operation before reassembly

The Dryer Timer is an OEM part for Frigidaire dryers. It is responsible for controlling the drying cycles by regulating the amount of time the dryer runs. The timer ensures that clothes are dried according to the selected settings, contributing to efficient and effective drying performance.

Causes of a bad timer can include electrical issues such as a short circuit, worn-out internal components due to frequent use, or exposure to moisture that can damage the timer mechanism.

Symptoms of a bad Dryer Timer include:

• The dryer not advancing through cycles
• The dryer running continuously without shutting off
• Inconsistent drying times
• The timer knob not turning or feeling loose

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement timer is made by Frigidaire and is compatible with commercial washers.This timer controls the internal components that monitor the duration of the cycles. If the user notices that the laundry center cycles are not running for the correct amount of time or do not start at all, the timer may need to be tested for continuity and then replaced. Make sure to entirely disconnect the appliance from the power and water sources and wear work gloves before attempting any repairs or replacements. This is an authentic OEM part made of high-quality, durable, non-corrosive materials and is only sold individually. This timer can be used with washers that have been manufactured by Frigidaire, Kenmore, Electrolux, Gibson, Kelvinator, Westinghouse, and some other brands.

This is a washer timer. The timer is used to control how long different elements of the wash cycle take, including filling, soaking, washing, spinning, and rinsing. If the timer is not working properly, the machine may cease to function properly. It could take more time to wash, or the machine might never stop spinning.Parts of the timer, such as the pins or motor, could break, corrode, or wear out. Unplug the washer before they start the repair. It's also a good idea to wear gloves for safety.This washer timer is compatible with washers from Frigidaire, Crosley, and White-Westinghouse. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.

This dryer timer controls the sequence and length of drying cycles. Replacing a failed timer restores consistent cycle advancement and automatic shutoff so your dryer starts, runs, and ends at the correct time. What it does:

• Advances the selected cycle by opening and closing internal switch contacts on schedule
• Coordinates start/run timing and end-of-cycle shutoff for timed and auto settings
• Common failure signs: timer knob doesn't advance, dryer runs too long or won't shut off, stops early, or only certain cycles work

• Includes 1 dryer timer assembly

• Unplug the dryer or disconnect power before servicing
• Access the timer from the console; remove the control knob and mounting screws to release it
• Transfer wires one at a time to matching terminals on the new timer using your model's wiring diagram
• Mount securely, reassemble the console and knob, then test for proper cycle advancement

Electromechanical timer that controls cycle sequencing and timed functions on compatible Frigidaire appliances. Replaces a faulty timing mechanism to restore proper cycle advancement and reliable timed control. What it does:

• Routes power to appliance components at set intervals so cycles advance in the correct order.
• Starts and stops timed functions based on the selected setting.
• Common symptoms it can fix: cycles that won't advance, a timer that doesn't run or clicks continuously, or timed functions operating incorrectly.
• Works with electromechanical/manual control systems that use a mounted timer assembly.

• Disconnect power (and gas supply for gas appliances) before servicing.
• Handle wiring by the connector terminals and note wire locations or take a photo before removal.
• Some models require removing the control panel or console to access the timer; keep track of mounting hardware.
• After installation, restore power and test the appliance.

Made to be used on washing machines, this part is a timer. This component controls the electrical parts and the duration of time of the washing machine's cycles. It controls the operation of the washing machine, including each of the cycles.When the timer will not advance, the washing machine could become stuck in a cycle and run constantly without stopping. The washing machine may not advance through the particular cycle like the washing, rinsing, or spinning and could get stuck on one of the cycles. It's important to unplug the washing machine from the electrical outlet before attempting to repair or replace any parts. The replacement process is fairly easy and takes about 15 minutes to complete.This timer is compatible with washing machines that are manufactured by the Frigidaire, Gibson, Kenmore, and White-Westinghouse brands. This part is sold individually and is sourced straight from the manufacturer itself.

This mechanical cycle timer controls the sequence and duration of wash, rinse and spin functions in compatible top-load washing machines, restoring proper cycle advancement and timing. What it does:

• Advances the washer through timed cycles so selected wash, rinse and spin functions run in the correct order.
• Routes power to the washer's motor and valves at the right points in the cycle.
• Commonly replaces timers that cause machines to get stuck on one cycle, fail to advance, or not complete a cycle.
• Works with the machine's existing control knobs and wiring harness to restore automatic cycle sequencing.

• Disconnect power to the washer before beginning any service to avoid electrical shock.
• Service typically requires access behind the console or control panel; remove panels carefully and keep fasteners organized.
• Note and photograph wiring connections before removal; reconnect wires to the same terminals.

This electromechanical timer controls the sequencing and duration of appliance cycles, restoring timed operation for wash/dry/cook functions depending on application. Replaces a worn or non-advancing timer to help return your appliance to normal use. What it does:

• Rotates through cycle positions to start and stop functions at set intervals
• Sends power to motors, heaters, or pumps according to the selected cycle
• Common symptom: appliance fails to advance through cycles or stops mid-cycle
• Common symptom: timer knob feels loose, won't click, or won't engage selected settings

• Disconnect power before servicing to avoid shock hazard
• Follow your model-specific service manual for disassembly and timer alignment
• Verify terminal connections and wiring harness fit before applying power