Parts for Weedeater XT700: Fuel Tank / Crankcase / Crankshaft Parts

Assembly screw for grass line trimmers, leaf blowers, and pruners. Secures internal components and housing panels. Replace if stripped, missing, or damaged.

Secures the muffler to the cylinder on gas trimmers, blowers, and hedge trimmers. Replace if the original bolt is lost, stripped, or damaged.

Muffler shield assembly for gas line trimmers. Protects the muffler and surrounding components. Replace if cracked, damaged, or missing for safety.

This screw secures the cylinder head to the engine block in outdoor power equipment like mowers and trimmers. Located at the top of the engine, it maintains proper compression and seal between engine components. Replace if the screw is stripped, corroded, or if you notice loss of engine power, oil leaks around the cylinder head, or difficulty starting the engine.

This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners.Spark plugs in outdoor appliances such as these might have to be replaced if they are not functioning as usual. If the ignition system is not working, if the spark plugs are not igniting in the first place, or if the spark plugs are igniting but the engine is not powering on, it is likely that the spark plugs are damaged and should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: Husqvarna, Stihl, Craftsman, Weed Eater, Toro, Cub Cadet, Ryobi, Homelite, Poulan, Wheel Horse, Tecumseh, Tanaka, Black Max, and Green Machine.

Genuine engine cylinder for gas line trimmers and outdoor power equipment. Houses the spark plug and piston to create the combustion chamber. Replace if cracked or worn.

Engine gasket kit for gas and grass line trimmers. Prevents air and oil leaks to maintain efficient engine operation. Replace when worn or leaking.

Piston ring seals the space between piston and cylinder wall in gas-powered outdoor power equipment engines. Replace if worn, cracked, or causing smoke.

Fix a loose or rattling piston with this wrist pin retainer. Secures the piston pin in trimmers, blowers, and hedge trimmers. Basic hand tools needed.

Engine piston kit for gas trimmers and outdoor equipment. Replaces worn, damaged, or corroded pistons that cause poor compression and engine performance.

Replace a worn or damaged crankcase assembly causing loss of compression, difficulty starting, or oil leaks. Fits gas leaf blowers and line trimmers.

Engine gasket kit for gas and grass line trimmers. Prevents air and oil leaks to maintain efficient engine operation. Replace when worn or leaking.

Insulation for carburetor adapter on gas line trimmers. Replaces worn, cracked, or damaged insulation between carburetor and adapter on small engines.

This replacement screw is intended for use on a variety of lawn and garden tools to attach components. It is a genuine OEM part sourced directly from the manufacturer. It is used to attached the trimmer head to the shaft in weed eaters and in many other applications on other tools. Overuse and normal wear and tear can cause damage to the screw. The screw can also become stripped when it is over-tightened or bent from contact with heavy debris. The screw will need to be replaced if this happens. Routinely inspecting equipment will help reveal broken or missing screws that need to be replaced or tightened. This screw is a star-slotted screw that requires a Torx screwdriver to remove it from the machinery. If the screw is in a tight-fitting area, an extension socket with a Torx bit can be used to remove the screw and to install a new one. When replacing a screw, check the remaining screws for damage and tighten any that are loose. This screw is a silver-colored, heavy-duty metal screw sold individually. It is compatible with trimmers, leaf blowers, leaf vacuums, hedge trimmers, and other equipment manufactured by Craftsman, Weed Eater, Poulan, and Husqvarna.

Engine gasket kit for gas and grass line trimmers. Prevents air and oil leaks to maintain efficient engine operation. Replace when worn or leaking.

Engine won't start or runs rough? This line trimmer carburetor controls fuel and air mixture for proper combustion. Moderate DIY repair, 30-45 minutes.

Engine won't start or runs rough? This line trimmer carburetor controls fuel and air mixture for proper combustion. Moderate DIY repair, 30-45 minutes.

Screws are responsible for holding together various lawn and garden engine components and housing parts. Although it is made of durable metal, the screw can be subject to damage from an incident or impact. It could also become worn or stripped over time, or even lost in the process of other repairs. As a result, a replacement would be necessary, and it should be made as soon as possible. This screw will provide the perfect fit for compatible machines. This genuine OEM replacement screw is manufactured by Husqvarna to exact standards. It can be found in applications on more than 150 machines from Poulan, Husqvarna, Weed Eater, and Jonsered. The screw is used on multiple machines, including hedge trimmers, pruners, blowers, and trimmers. Be sure to check the parts diagram for exact application and location of this screw. The screw is sold individually as a single unit and those who need more than one will have to purchase additional quantities. This screw is made of premium metal and requires a Phillips head screwdriver for replacement.

Foam air filter keeps dirt out of your engine and carburetor. Replace when clogged to prevent rough idling, sputtering, and hard starting. Verify fit.

This ignition module generates the electrical spark needed to ignite the fuel-air mixture in a small engine, typically found in string trimmers and similar outdoor power equipment. It converts low-voltage energy into a high-voltage pulse sent to the spark plug. Replace this module if the engine fails to start, misfires, stalls intermittently, or produces no spark at the plug.

These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

This replacement part is a lead wire. This is a genuine replacement part made by Husqvarna. This wire is used in different machinery and allows the entire engine to operate smoothly and efficiently. A new lead wire might be needed if the current one is missing or damaged in anyway. It is not uncommon for any type of wire to become stripped down over time and not work as well. If this is the case, be sure to replace this part as soon as possible. Turn the engine off before beginning this repair. Work gloves are always recommended while working with wires to ensure safety to the user. This lead wire is a genuine OEM replacement part to ensure proper fit and long-lasting use. This part is sold individually and is sourced directly from the manufacturer.

Trimmer won't start or shuts off unexpectedly? This ground wire switch restores proper ignition grounding. Simple repair in under 30 minutes.

Designed for use with a wide range of string trimmers, this momentary switch is a genuine OEM replacement part. A momentary switch, also known as a kill switch, is a safety precaution that kills an appliance's engine in a moment, even if the engine is not set to the off position. This helps prevent accidents if the operator begins to lose control of the trimmer. At the touch of a button, the engine cuts and cannot be restarted for a short period (usually about five seconds). Momentary switches are positioned in a way that they don't often sustain damage but, over time, they can wear out. Once a switch stops working, it will need to be replaced to ensure safe operation. This is a fairly straightforward fix that only requires a screwdriver to open the tiller's handle and pliers to safely remove the wiring. This part is designed for string trimmers made by Poulan, Weed Eater, Paramount, and Husqvarna. It ships individually of any other hardware is comes sourced from the original manufacturer.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.

This part is a replacement recoil starter pulley. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken recoil starter pulley in leaf blowers.The recoil starter assembly is essential for starting up the engine as it spins the flywheel in order to get the engine to power on. If this part is faulty, the engine may have trouble starting or may not start at all. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular recoil starter pulley, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This recoil starter pulley can be used with a variety of leaf blower models manufactured by Husqvarna, Poulan, and other brands.

Replacement fan baffle for gas line trimmers and pole pruners. Directs airflow for proper engine cooling. Replace if cracked, broken, or missing.

Assembly screw for grass line trimmers, leaf blowers, and pruners. Secures internal components and housing panels. Replace if stripped, missing, or damaged.

Flat washer for trimmers, blowers, and hedge trimmers. Replaces worn, missing, or damaged washers. Essential hardware for secure assembly and fit.

Heavy metal flywheel assembly connects to the rotating shaft to regulate power delivery from the motor. Replace if cracked, damaged, or worn from use.

Retaining ring fastener for brush cutters and trimmers. Holds components securely together. Replace if cracked, worn, or missing for proper assembly.

Crankshaft outer bearing creates a flexible joint for moving components. Replace when you notice excessive vibration or noise during operation. Verify fit with your equipment's model number before ordering.

Seals the crankcase opening to prevent oil leaks around the crankshaft. Replace if you notice oil seepage or grinding noises. Confirm fit with model.

Bearing facilitates smooth rotation in outdoor power equipment. Replace when you notice grinding noise, vibration, or rough operation. Verify fit.

This is a connecting rod assembly used in many types of lawn and garden equipment. It is made of durable metal and connects the engine crankshaft to the piston. The connection rod assembly is also tasked with transferring power to the crankshaft from the piston. This is an important component that is required for the proper functioning of an internal combustion engine.If the connecting rod assembly has gone bad, it can cause knocking sounds from the engine, low oil flow and pressure, and excessive oil consumption. In some cases, a broken connecting rod assembly will also result in an overheating engine. If the connecting rod assembly has gone bad, a wrench and screwdriver will be needed to replace it. Make sure to wear work gloves, disconnect the spark plug wire, and let the engine cool before working on the part.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The connecting rod assembly is designed for use with string trimmers, hedge trimmers, leaf blowers, edgers, and pole prunes manufactured by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

Engine gasket kit for gas and grass line trimmers. Prevents air and oil leaks to maintain efficient engine operation. Replace when worn or leaking.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

This item is a fuel retainer tank for use on lawn and garden trimmers. It is a genuine Husqvarna part. It is a small item but is very important, as it prevents the fuel inside the tank from becoming contaminated or dirty. Contaminated fuel can ruin a trimmer or other appliance.This retainer is a genuine OEM part sourced directly from the manufacturer and is sold individually. Replacing the retainer is a simple repair that is appropriate for beginners. The retainer usually comes off easily without the use of tools. It is normal for the retainer to experience damage throughout the life of the trimmer and need to be replaced.This retainer is made for compatibility with several brands and models of weed whackers and trimmers, including Craftsman, Husqvarna, Poulan, and Weedeater. It may also be compatible with similar products made by AYP, Jonsered, McCulloch, and RedMax.

The fuel system on a trimmer is contained within the fuel tank assembly and will include the fuel lines, fuel cap, and the fuel filter. It is a typical and essential system on any gas-powered trimmer. Although it might seem that a fuel system is a universal thing, there are specific styles that work with specific models. Though they are crafted of durable materials, with time and the vibrations, heat, and wear and tear put on them, they can require replacement. They can also be damaged by dropping or striking the trimmer and necessitate a replacement. It will require a star or Torx screwdriver for the replacement process. The damaged assembly will have to be removed, and any seals or lines checked for damage or leaks, and then the new assembly can be installed easily. This authentic OEM fuel tank assembly is designed to include the fuel tank, a cap, and the fuel line. It is made of durable and long-lasting materials and will offer a long period of reliable performance when installed properly. This fuel tank assembly works on string trimmers as well as pole pruners made by Craftsman, Poulan, Poulan Pro, and Weed Eater, as well as Husqvarna.

The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.

Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.

Symptoms of a bad Fuel Line include:

• The engine failing to start or running inconsistently
• Visible cracks or leaks in the fuel line
• Fuel odor or visible fuel leaks around the equipment
• Reduced engine performance or stalling during operation

This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.

This is a fuel pickup filter that sits inside the fuel tank of a chainsaw or small engine. It screens debris and contaminants from the fuel before it reaches the carburetor, ensuring clean fuel delivery. Replace this filter if the engine is running rough, stalling, losing power, or if the filter is visibly clogged or deteriorated.

Engine gasket kit for gas and grass line trimmers. Prevents air and oil leaks to maintain efficient engine operation. Replace when worn or leaking.

Choke lever for gas line trimmers. Mounts on the engine control housing. Replace if the lever is broken, cracked, or missing to restore choke operation.

Primer bulb pushes fuel into the carburetor for easier cold starts. Replace if cracked, stiff, or not pumping fuel. Verify fit with your model number.