Gaggenau Parts

If your dishwasher detergent dispenser won't open during the wash cycle, this actuator lever assembly with springs restores mechanical movement.

This replacement temperature control knob restores a worn or broken dial so you can set oven or range temperatures accurately and safely. It provides a simple push-on fit for straightforward control panel operation. What it does:

• Replaces a cracked, stripped, or missing temperature control knob to restore user control
• Allows precise selection of temperature settings via the control shaft
• Improves grip and visibility of setpoint compared to damaged knobs
• Prevents slipping on the control shaft for consistent temperature adjustments

• One (1) temperature control knob

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove the old knob by pulling straight off the control shaft; push the new knob onto the shaft until fully seated
• If the knob does not fit, verify you have the correct shaft style and part number before forcing installation

This part is the grease filter made to trap the grease from the exhaust air on an range hood. It is made out of metal mesh. It is important that this component is clean and clear for the range hood to operate at optimal levels. This product contains two filters.If the filter becomes clogged and cannot be cleaned with soap and water, then this will be a high-quality replacement part. Over time, the filter becomes dirt due to its function. If it begins to stink or become unsightly, the owner may wish to replace it. Doing so can often improve the overall performance of the oven hood.This particular set of grease filters is compatible with range hoods that have been manufactured by the Bosch and Maytag brands. This set is sold individually. It is sourced straight from the manufacturer as a genuine OEM part.

Replace a bent, warped, or missing oven rack. This wire shelf installs inside your oven to provide stable support for cookware and bakeware at the correct height.

Secures the middle hinge on your refrigerator to keep the door aligned and pivoting smoothly. Replace if the pin is worn, bent, or missing.

This fast radiant cooktop element replaces a damaged or non-working surface burner to restore even, reliable heating on compatible electric glass-ceramic ranges. It's a direct-fit heating element designed for 4-wire connections. What it does:

• Heats cookware quickly via the radiant heating surface for stovetop cooking
• Replaces cracked, non-heating, or intermittently heating burners
• Restores consistent temperature response and even heat distribution
• Works with 4-wire cooktop wiring; matches OEM element size and mounting

• One fast radiant cooktop element (180 mm / 7 in., 4-wire)

• Disconnect power at the breaker before servicing the cooktop to avoid shock
• Handle glass-ceramic surfaces carefully to prevent cracking; lift element per your model's service instructions
• Match wire colors/terminals exactly and secure connections;
• Test cooktop function after installation and re-seat any trim or retainers per the manufacturer guide

This is a control knob designed for use on a gas range cooktop or oven. It attaches to the control shaft and allows you to select burner or oven temperature settings. Replace this knob if it is cracked, broken, or if the printed markings have worn off, making it difficult to set the correct heat level.

This is a replacement fluorescent lamp starter designed for use with 80W, 240V fixtures. It helps the lamp reach full brightness reliably so lighting cycles start and run normally. What it does:

• Provides the initial pulse to ignite fluorescent tubes in compatible fixtures
• Commonly restores lamps that fail to start or take multiple strikes to light
• Can stop or reduce continuous flickering or rapid flashing at startup
• Works with starter-type ballasts specified for 80W / 240V operation

• Disconnect power to the fixture before servicing to avoid shock
• Typically replaces a plug-in starter in the fixture's starter holder—pull old starter straight out and push the new starter into place
• Confirm fixture voltage and lamp wattage match the starter specifications before installing

This rubber gasket seals appliance openings to help prevent water and air leaks and restore proper door/tub sealing. It replaces a worn or damaged seal to reduce leaking and maintain normal appliance performance. What it does

• Creates a watertight/airtight barrier between mating surfaces to prevent leaks.
• Helps maintain operating temperature and efficiency by sealing the door/tub.
• Common symptom: visible water around the door or base during use.
• Common symptom: cracked, flattened, or distorted seal material that no longer compresses.
• Works as a direct replacement for the matching OEM seal when damaged or worn.

• One gasket as shown on the product page.

• Turn off power and water supply to the appliance before starting any repair.
• Remove the old seal carefully, clean the mounting channel of debris and residue, and inspect the mating surface.
• Press the new gasket evenly into the channel, starting at one corner and working around to ensure full seating without twists.
• Test the door closure and run a short cycle to confirm there are no leaks; re-seat if necessary.

The grill heating element is a 230-volt, 1500-watt radiant coil or surface element that generates intense direct heat for grilling or broiling food in your range or cooktop. It glows red-hot to sear and brown food from above or below depending on its position. Replace this element if it no longer heats up, heats unevenly, has visible breaks or burn spots, or causes your circuit to trip when in use.

Replace your dishwasher's worn, cracked, or leaking hose. This water supply tube connects internal components and may need replacement if damaged or missing.

Dishwasher door spring that counterbalances door weight via cable and reel system. Mounts to base. Replace if broken, worn, or missing.

This is a replacement mounting nut for VG 230 assemblies. It provides a secure threaded connection to help keep the VG 230 component fastened and stable, restoring proper fit and reducing vibration-related looseness. What it does:

• Secures the VG 230 component to its mounting or mating hardware
• Maintains a tight threaded connection to prevent part movement or loosening
• Helps preserve alignment and stable operation of the connected assembly
• Can be used during routine repairs or when replacing stripped or damaged fasteners

• Disconnect power and any supply lines before starting repairs; follow appliance safety procedures
• Use the correct socket or wrench to avoid rounding the nut; hand-start the threads to prevent cross-threading
• Tighten to a snug fit—do not overtighten to avoid damaging mating threads or components
• If threads are damaged or corroded, replace mating hardware.