General Electric Dishwasher Dishrack

Color: gray. Measures about 1 inch high by 1-1/2 inches deep.

The comb retainer is the small clip that secures the rack comb/tine row to your dishwasher's rack. It keeps the insert firmly in place so dishes stay upright and wash effectively without the tines coming loose.

• Locks the rack comb/tine insert onto the rack wires to prevent shifting
• Helps keep plates, lids, and cookware upright during cycles
• Restores stability when the original retainer is cracked, worn, or missing
• Common symptoms: comb/tine row loosens or falls off, dishes tip over, or you notice rattling in the rack

• Unplug the dishwasher and shut off the water supply before servicing
• Pull out the rack and note the retainer's orientation for reference
• Release and remove the damaged retainer; align and snap the new retainer securely onto the comb and rack wire
• Confirm the comb/tine row is firmly attached and the rack moves freely before running a cycle

A small rack clip that holds stemmed glasses upright during dishwasher cycles, reducing tipping and breakage. Restores proper support for wine glasses and other stemware so they wash safely and stay secure. What it does:

• Secures the stem of wine glasses and goblets to keep them stable during wash and rinse cycles.
• Prevents tipping, chipping, and breakage caused by glasses shifting in the rack.
• Replaces cracked, broken or missing stemware clips that allow dishes to move or clink.
• Helps reduce noise from glassware hitting the rack when the clip is damaged or absent.

• Remove dishes and ensure the dishwasher is off before replacing the clip.
• Seats into the dishwasher rack slot—press into place until fully seated; no special tools usually required.
• Refer to your appliance manual for model-specific instructions and safety guidance.

This rack stemware insert secures glasses and stemware in the dishwasher rack to help prevent tipping and chipping during cycles. Durable plastic holds stems upright for safer cleaning. What it does:

• Clips into the dishwasher rack to support wine glasses and stemware
• Helps keep tall or fragile glasses from tipping, banging or breaking while washing
• Maintains spacing between stems to improve water flow and cleaning
• Fits into existing rack wire tines to convert a standard rack into a stemware-safe area

• One rack stemware insert

• Remove the dishwasher rack to align and clip the insert onto the rack wires; ensure it snaps securely before returning the rack
• No electrical disconnection required, but remove dishes and check for sharp rack edges during installation
• Do not use if the part is cracked or broken; replace to avoid glass damage
• Hand-wash the insert if needed and place back in rack before running dishwasher

This part is an upper dishrack assembly for dishwashers. The purpose of this part is to hold dishes and cookware during the washing process. There are two dish racks per unit, and this particular dishrack goes on the top of the unit. The lower dishrack assembly is sold separately. Over time, the upper dishrack assembly may rust due to the coating breaking down and water corroding the metal. If this happens, the dishrack assembly will become brittle and less structurally sound and will need to be replaced. If the attached rails have broken and will not attach to the sides of the dishwasher and slide appropriately, this part may need to be replaced.This upper dishrack assembly is compatible with dishwashers that are manufactured by the GE and Whirlpool brands. This particular component is an OEM part that is sourced directly from the manufacturer and is sold individually.

Right hand side

This gripper holds stemware securely in the dishwasher stemware rack to help prevent glasses from tipping, shifting, or breaking during a wash cycle. It replaces worn or broken stemware clips so racks can secure the stems of wine and other stemmed glasses. What it does:

• Clips onto the dishwasher stemware rack to hold glass stems steady during cycles
• Helps reduce glass-to-glass contact and chipping from shifting items
• Restores proper rack functionality when original grippers are missing or damaged
• Fits into the rack's designated stemware openings for a snug hold

• One gripper stemware clip (single piece)

• High-level replacement — typically snaps into the rack's stemware slot without tools
• Inspect the rack for damage; replace any additional broken clips as needed
• Disconnect power to the appliance before doing any work that requires access inside the dishwasher
• Handle glass carefully to avoid breakage during removal and reinstallation

This replacement multi-purpose glass shelf provides a sturdy, easy-to-clean surface for organizing food and containers in your refrigerator. Restores usable shelving space after a chip, crack, or missing shelf. What it does:

• Supports refrigerated items and helps keep food organized and visible
• Replaces a cracked, chipped, broken, or missing refrigerator shelf
• Fits into existing shelf tracks or ledges to restore proper shelf spacing
• Tempered glass construction resists everyday cold-area wear (handle with care)

• Remove food and containers from the area before installing
• Handle the shelf carefully; wear cut-resistant gloves if replacing a broken shelf
• Slide shelf into the existing tracks/ledges until fully seated; do not force
• If glass is damaged on arrival, stop installation and contact the seller for a replacement

Right hand side

This left-hand lever rack assembly restores proper lever engagement and movement on compatible GE appliances, helping racks or lever-linked mechanisms operate smoothly and reliably. What it does:

• Replaces a damaged or worn left-hand lever rack that no longer secures or guides the lever mechanism
• Restores proper engagement and stable movement for the affected rack or lever
• Helps fix symptoms like slipping, sticking, or misaligned lever/rack operation
• Matches OEM fit and form to maintain original function and alignment

• Disconnect power before attempting any repair; unplug or switch off the breaker.
• Basic hand tools are typically required; follow the appliance service manual for exact disassembly steps.
• Handle plastic parts carefully to avoid damage; verify proper seating and alignment before reassembly.

Left hand side