General Electric Dishwasher Touch Pad

This keypad is the touch-sensitive switch assembly behind the dishwasher's control panel. It enables cycle and option selection; when it fails, buttons can become unresponsive or behave erratically, preventing normal operation.

• Mounts behind the control panel and sends button-press signals to the control board
• Helps restore proper cycle selection and start/stop functions
• Common symptoms include unresponsive buttons, intermittent or stuck keys, random beeps/lights, or needing to press very hard
• Connects via a flat ribbon cable to the electronic control

• Disconnect power at the breaker before servicing
• Access is typically from the inner door; remove console/inner panel screws to reach the keypad
• Handle the ribbon cable carefully—do not crease; ensure the connector is fully seated and oriented correctly
• Reassemble the console and test keypad functions before closing up completely

This dishwasher keypad is the membrane touchpad behind the control console. It registers your button presses so you can select cycles and options. Replacing a failed keypad restores reliable button response and allows the dishwasher to start. What it does / symptoms:

• Provides the user interface for cycle and option selection
• Sends button-press signals through the ribbon connector to the electronic control
• Buttons are unresponsive or work intermittently
• Dishwasher won't start when Start/Reset is pressed
• Indicator lights may come on but controls don't respond to input

• One keypad

• Disconnect power at the breaker before servicing
• Access the console/door area to reach the keypad and control
• Carefully release the ribbon connector; avoid creasing or damaging it
• Ensure the ribbon is fully seated and correctly oriented in the control board connector before reassembly

This dishwasher keypad is the membrane touchpad mounted behind the control panel. It registers your button presses and sends them to the control, restoring reliable cycle selection and start when the original keys stop responding.

• Receives your button presses for cycles, options, and Start
• Sends those inputs to the dishwasher's electronic control
• Mounts behind the control panel; replaces the membrane touchpad/keypad
• Failure symptoms include unresponsive or intermittent keys, stuck-key beeps/errors, or inability to start a cycle

• Disconnect power at the breaker before servicing
• Open the door and remove inner-door screws to access the control area
• Carefully release and reinsert the ribbon cable; keep it straight and fully seated
• Align the keypad behind the control panel, secure, reassemble, and test functions

Replacement keypad assembly that restores the front control interface on compatible GE appliances, giving reliable button response and straightforward entry of settings when the original keypad is worn, damaged, or unresponsive. What it does:

• Provides the user interface for selecting cycles, temperatures and timer settings by transmitting button presses to the appliance control.
• Replaces worn, cracked, or non-responsive buttons and membrane surfaces that no longer register inputs.
• Can resolve symptoms like unresponsive or intermittent buttons, erratic control behavior, or failure to accept commands from the front panel.
• Works with the appliance's electronic control to return normal keypad operation when the control board itself is functioning.

• Always disconnect power to the appliance (unplug or switch off circuit breaker) before starting any repair.
• Handle the keypad and any attached ribbon cable carefully to avoid damaging contacts; avoid touching circuit traces.
• Follow the appliance service manual for removal/replacement steps and torque values for fasteners.

This keypad assembly is the user-interface switch pad for a dishwasher's control panel. It registers button presses for cycles, options, and start, restoring normal input when keys are unresponsive or behave intermittently.

• Provides the control-panel keypad used to select cycles, options, and start/cancel
• Sends button signals to the electronic control board via the ribbon connector
• Failure symptoms can include: some or all buttons not responding, won't start with door latched, intermittent inputs, or random/beeping key activity
• Restores reliable button response and user control

• Disconnect power at the breaker before servicing
• Access the console/inner door area to reach the keypad; transfer and connect the ribbon cable carefully
• Ensure the ribbon connector is fully seated; avoid creasing or contaminating contacts
• Reassemble and test button functions before finalizing the repair

Replacement membrane keypad that restores the oven/range control interface so you can enter temperatures, cook modes and timers with responsive button feedback. Ideal when keys are worn, unresponsive, or hard to read. What it does:

• Sends user button presses to the appliance's electronic control so you can select bake/broil modes, timers, and temperature settings.
• Use when buttons are unresponsive, intermittent, sticky, or not registering inputs.
• Helps when key labels are faded or damaged and make controls difficult to read.
• Does not replace the main control board; it provides the user interface that communicates with the control.

• Disconnect power to the appliance before beginning any repair.
• Access may require removing the console trim or control panel; keep track of screws and clips.
• Carefully disconnect and reconnect the keypad ribbon cable to avoid bending or damaging the contacts.
• Test the electronic control board and connectors for faults.

This replacement keypad provides the push-button controls for the oven/range control panel so you can restore responsive temperature, timer and function input. It gives a direct, like-for-like way to fix unresponsive or damaged front-panel buttons. What it does:

• Replaces the front-panel push-button keypad used to select bake, broil, timers and other oven functions
• Restores button responsiveness when keys are sticky, worn, or no longer register presses
• Helps resolve control-panel input issues and some user-interface error symptoms
• Works with the existing control board and ribbon/cable connection to send user commands

• One keypad assembly

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Installation typically requires removing the oven/range control panel trim; keep screws and fasteners organized
• Handle the flat ribbon/cable and connector gently; ensure proper seating when reinstalling
• Test keypad operation before fully reassembling the trim and outer panels

This keypad is the user interface touchpad for the appliance's control panel, letting you select cycles and settings with responsive button inputs. It replaces a worn or unresponsive touchpad to restore normal front-panel control. What it does:

• Registers button presses and sends user commands to the appliance control board
• Restores front-panel responsiveness when buttons are sticking or unresponsive
• Helps correct intermittent or missing input signals that prevent cycle selection
• Can resolve issues where the display shows settings but will not accept changes

• One keypad assembly

• Disconnect power before servicing
• Handle the keypad assembly carefully and avoid flexing or contaminating the ribbon cable/contacts
• Reconnect ribbon cables and secure any retaining clips; ensure the keypad is seated flush in the control bezel
• If problems persist after replacement, check the main control board and connectors for damage

This keypad assembly is the user-facing control panel that lets you select cycles and options on your washer. Replaces a worn or unresponsive keypad to restore reliable button response and control readability. What it does:

• Provides tactile button input for cycle selection, start/pause, and option functions
• Restores control responsiveness when buttons are sticky, cracked, or unresponsive
• Maintains the front console finish and label legends for clear visibility
• Interfaces with the washer's control board to send user commands

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access typically requires removing the top or front console cover; keep track of screws and clips
• Handle the ribbon cable and connector carefully to avoid damage; align and seat fully on reinstallation

This keypad is the user-facing button assembly for the oven control panel, letting you send cooking commands and change settings. It restores responsive button control so the range accepts inputs and starts selected functions. What it does:

• Provides the tactile buttons used to enter bake, broil, timer and temperature commands
• Replaces worn or unresponsive keys that won't register presses or skip inputs
• Fixes issues where the control panel won't respond or certain functions won't start
• Works with the control board to relay user selections to the oven electronics

• One keypad (button assembly) as shown

• Disconnect power to the appliance before beginning any service to avoid shock
• Remove control panel trim or bezel as required to access and disconnect the keypad ribbon or connector
• Handle the keypad and ribbon gently to avoid tearing or bending contacts
• Test the keypad operation after reconnecting power and reassembling the panel

Color: Black

This keypad is the front control panel membrane that lets you select cycles and settings for the appliance. It restores tactile button response and reliable user input so the unit accepts commands again. What it does:

• Replaces a worn or damaged control-panel keypad so button presses register correctly
• Restores touch/press input used to select cycles, options, and start functions
• Can resolve symptoms like unresponsive or intermittent buttons and failure to accept selections
• Helps eliminate erratic control behavior caused by a cracked or delaminated keypad

• Disconnect power to the appliance before beginning any service
• Remove the control panel or console trim to access the keypad
• Handle the flexible ribbon cable and connector gently to avoid damage

This escutcheon and insert assembly is the exterior trim that covers and protects the appliance control area, restoring a clean, finished appearance and helping keep controls free of dirt and debris. What it does

• Replaces cracked, broken, or warped control-panel trim that exposes internal components
• Covers openings around control buttons and switches to prevent dust and grime buildup
• Helps maintain proper spacing and alignment of control components for secure operation
• Improves the appliance's appearance after impact or wear

• One escutcheon and insert assembly

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Typically secures with screws or snap clips; use basic hand tools and avoid force when removing clips
• Handle the trim carefully to avoid scratching the finish; align tabs before fastening

A replacement escutcheon insert that restores the finished trim around the appliance control area and helps protect the control shaft from dirt and wear. Restores appearance and stabilizes the control knob interface. What it does:

• Covers and trims the control shaft area for a clean, finished look
• Helps keep dirt and moisture away from the control mechanism
• Prevents wobble or rubbing that can occur with a damaged or missing insert
• Commonly replaced when cracked, broken, loose, or cosmetically worn

• Disconnect power to the appliance before starting any work
• Often snaps into the control panel or installs from behind after removing the panel; gentle prying may be required
• Inspect surrounding clips or tabs and replace if damaged to ensure a secure fit