General Electric Dishwasher Knob, Dial & Button

This timer knob replaces the cycle control knob on select dishwashers. It mounts to the timer shaft so you can choose wash cycles; a cracked or stripped knob can make the timer difficult to turn or impossible to set.

• Mounts on the timer shaft to set and advance dishwasher cycles
• Replaces a broken, cracked, stripped, loose, or missing knob
• Helps when the timer won't turn by hand or the knob slips on the shaft
• Restores normal feel and alignment of the front-panel control

• Disconnect electrical power at the breaker before servicing.
• Pull the old knob straight off the timer shaft; do not pry on the console.
• Align the new knob with the shaft and press firmly until fully seated.
• Restore power and verify smooth rotation through all settings.

Color: white. It measures about 2 inches in diameter by 2-1/2 inches deep.

Color: Black

Color: White.

This timer knob is the user control that sets and advances wash cycles on your dishwasher. Replacing a worn or broken knob restores positive engagement with the timer shaft so you can reliably select and start cycles.

• Attaches to the timer shaft on the control panel to select and advance wash cycles
• Provides a secure grip and proper indexing to the dial markings
• Common fix for a stripped, cracked, loose, or missing knob
• When the knob no longer engages the shaft, the timer may not turn or settings may not change

• Disconnect power at the breaker before servicing
• Pull the old knob straight off the shaft; retain any spacer or clip from the original
• Align the new knob's insert with the flat/D-shape on the shaft and press firmly until fully seated
• Verify smooth engagement through the settings before restoring power

This dishwasher control knob replaces a cracked or missing front-panel knob so you can select cycles and start the appliance normally. It restores a secure grip and a clean, factory look in a black finish.

• Fits onto the control shaft to turn and select wash cycles and settings
• Provides positive engagement so the control turns without slipping
• Common symptoms: knob cracked or stripped, loose or falling off, hard to turn, or unable to select/start cycles
• Useful when the original knob is lost or discolored

• Disconnect power to the dishwasher before servicing
• Pull the old knob straight off the control shaft; if tight, rock gently—avoid prying on the panel
• Align the flat/keyed side of the new knob with the shaft and press fully into place

This replacement knob timer restores manual cycle selection and user control for your appliance's timer dial, making it easier to set and change cycles. It installs on the timer shaft and provides a firm grip for accurate adjustments. What it does:

• Replaces a worn, cracked, or missing timer knob so you can turn and set the timer dial again
• Provides a secure fit on the timer shaft to prevent slipping while selecting cycles
• Helps resolve symptoms like a loose or spinning knob, difficulty selecting settings, or inability to start timed cycles
• Restores tactile feedback and clear pointer alignment for accurate cycle selection

• One replacement knob timer (1 count)

• Disconnect power to the appliance before starting any repair
• Most installs require pulling the old knob straight off the timer shaft and pushing the new knob onto the shaft until fully seated
• Inspect the timer shaft for damage or debris before installing the new knob

This push button is the user-facing control button that completes a control circuit when pressed, restoring responsiveness to a worn or broken selector interface. It provides a direct, replaceable way to fix unresponsive or stuck control input. What it does

• Acts as the external control button that engages the appliance's internal switch when pressed
• Restores tactile feedback and reliable control input if the original button is cracked, loose, or missing
• Common symptom fix: buttons that stick, don't depress fully, or fail to activate functions
• Works with the matched internal switch assembly to ensure consistent operation

• Disconnect power before any service
• Remove the control panel or bezel as needed to access the button; avoid prying on surrounding trim
• Replace the button by aligning and snapping it into the button housing; do not force or bend retaining tabs
• If the button does not restore function, inspect the underlying switch/mechanism for damage before ordering additional parts

This knob latch secures a control knob to the appliance control shaft so knobs stay engaged and turn smoothly. It replaces a worn or broken latch to restore proper knob fit and reliable control operation. What it does:

• Holds the control knob onto the control shaft so knobs don't wobble or fall off
• Ensures consistent engagement for accurate temperature and function selection
• Commonly used to address loose or slipping knobs and intermittent control contact
• Works as a direct-fit replacement when the original latch is damaged or worn

• Disconnect power to the appliance before starting any repair.
• Typically installed from the front of the control panel after removing the knob; basic hand tools may be required.
• Inspect the control shaft and knob for wear and replace damaged components together for best fit.

A replacement knob latch handle that secures and indexes the appliance control knob for reliable selection and tactile feedback. Restores proper knob engagement to help prevent slipping or incomplete setting changes. What it does:

• Latches and holds the control knob in selected positions so settings stay engaged.
• Provides tactile detents for clear position feedback when turning the knob.
• Commonly replaces worn, cracked, or broken latch pieces that let the knob slip or fail to engage.
• Fits directly onto the control shaft and works with the existing knob assembly.

• Disconnect power (unplug or switch off circuit) before servicing to avoid shock or injury.
• Removal typically requires removing the control knob and/or console trim to access the latch; keep track of fasteners.
• Inspect the control shaft and surrounding components for wear; replace damaged knobs or retention clips as needed.

This replacement knob timer dial restores reliable control of your appliance's timer, giving a solid grip for setting cycles and improving user control. Ideal for replacing cracked, worn, or loose timer knobs. What it does:

• Provides a durable dial surface for turning and selecting timer settings
• Replaces cracked, stripped, or loose knobs that slip on the timer shaft
• Helps restore proper engagement so the timer responds to user input
• Improves safety and usability by giving a secure, easy-to-turn grip

• Disconnect power to the appliance before beginning any work
• Most knobs pull straight off the timer shaft; align splines and push the replacement on until seated
• Do not force the knob—confirm correct orientation before full installation

This replacement timer knob restores manual control of the oven timer and makes it easy to set cooking durations and timed functions. Simple push-on design gives a like-new feel when the original knob is cracked, worn, or missing. What it does:

• Replaces a damaged or missing oven timer knob so you can set and adjust the timer accurately
• Provides a clear pointer for selecting time settings and monitoring countdowns
• Helps eliminate slipping or stripped-feel when turning the timer shaft
• Restores safe, consistent user control of timer functions

• Disconnect power to the appliance before starting any work.
• Line up the knob's splines with the timer shaft and push firmly until fully seated; do not force.
• If the shaft is damaged or the knob won't seat correctly, inspect the timer shaft and replace the control if needed.

This replacement knob latch secures a control or selector knob and restores stable knob engagement on compatible GE appliances. It helps stop knobs from slipping, popping off, or failing to stay in the selected position. What it does:

• Holds a control or selector knob in place so settings stay engaged
• Restores normal knob-click action and tactile feedback
• Common fix when a knob slips, pops off, or won't stay set
• Small plastic latch used inside the control assembly

• Disconnect power to the appliance before beginning any repair.
• Remove the control knob and any trim to access the old latch; installation typically requires panel access.
• Replace the faulty latch with the new part and reassemble; verify knob operation before returning appliance to service.

A replacement black select button for the control console that restores a responsive, easy-to-use selector on compatible GE appliances. Replaces a cracked, worn or non-moving button so settings can be chosen reliably. What it does:

• Acts as the user-facing selector button on the control panel
• Allows selection of oven/cooktop or cycle options when pressed
• Fixes symptoms like a broken, stuck, loose or missing button
• Restores normal tactile feel and visual appearance of the console

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Access may require removing the control panel or overlay—refer to your model's service instructions.
• Gently remove the old button and snap or press the replacement into place; avoid forcing it.

This push-button replaces the Delay/Star control on compatible GE laundry appliances, restoring a responsive delay-start/select function on the console. It's a simple, direct replacement that lets the machine accept delay-start inputs reliably. What it does:

• Registers user presses for the delay/start feature so the washer/dryer can accept delayed-start commands.
• Provides the tactile "push" action and electrical contact needed for console input.
• Commonly used when the delay/select button is unresponsive, sticky, or physically damaged.
• Works as a single-button replacement; matches OEM fit and function.

• One push-button Delay/Star control.

• Disconnect power to the appliance before starting any service.
• Access requires removing the control panel; handle internal connectors and ribbon cables gently.
• Do not operate the appliance with panels removed; ensure all parts and fasteners are reinstalled.