General Electric Dishwasher Pump

The Dishwasher Sump is an OEM part for GE dishwashers. This part is located at the bottom of the dishwasher and serves as a central hub where water is collected and recirculated during the wash and rinse cycles. The sump houses the dishwasher's pump and filter assembly.  

Causes of damage to the dishwasher sump can include the accumulation of hard food particles or foreign objects that can lead to blockages or damage to the sump's structure.

Symptoms of a bad Dishwasher Sump include:

• Poor cleaning performance 
• Water not draining correctly or completely
• Unusual noises during operation 
• Leakage from the bottom of the dishwasher 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The GE Pump and Motor Assembly is an OEM part for GE dishwashers. It is the component responsible for circulating water and draining dirty water during all dishwasher cycles. The motor powers an impeller inside the pump body to transfer water from the bottom of the tub back to the upper spray arm for rinsing and removal of food soils from dishes.

Symptoms of a bad pump and motor assembly include:

• Incomplete or slow draining of water after cycle completion
• Water not circulating effectively to spray dishes during wash and rinse stages
• Loud humming or grinding noises coming from inside the dishwasher tub
• Leaks in the tub or base of dishwasher from deterioration of the pump seals

Causes of failure can be normal wear and tear over time, mineral or grit buildup within the pump impeller that reduces flow efficacy, or moisture damage to the motor windings.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Complete GE Pump and Motor Assembly is an OEM replacement part for GE dishwashers. This assembly is integral to the dishwasher’s functionality, as it combines both the pump and motor components that work together to circulate water during the wash and rinse cycles. The pump forces water through the spray arms, while the motor drives this process, ensuring thorough cleaning of the dishes.

Over time, the pump and motor assembly can wear out due to constant use and exposure to water and detergents. Additionally, debris or hard water buildup can clog the pump, causing strain on the motor and leading to failures. Electrical issues or damage from power surges can also impair the assembly's performance.

Symptoms of a bad pump and motor assembly include:

• The dishwasher not cleaning dishes properly
• Water not circulating or spraying during cycles
• Unusual noises, such as grinding or humming, coming from the dishwasher
• Water not draining properly from the tub
• The dishwasher not starting or completing cycles

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Sump is an OEM replacement part specific to GE-brand dishwashers. Located at the bottom of the wash chamber, the sump collects dirty water from each wash cycle.  

Causes of a bad sump can include cracks that leak water or mineral buildup clogging drain components over extended use. Improper drainage prevents the machine from functioning as designed.

Symptoms of an issue with the sump include: 

• Puddles or water leaks inside or outside the dishwasher 
• Standing water not fully draining after each cycle
• Moisture damage risking other internal parts

This part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Pump is an OEM component for GE dishwasher models. Located at the bottom of the dishwasher tub, this pump works to remove dirty water from the wash cycle and drain it out of the appliance. It is a vital component responsible for fully clearing all water from the dishwasher.

Causes of a bad drain pump can include a clogged or restricted impeller which prevents proper water drainage. Sediment buildup over time can reduce the pump's efficiency. The motor or internal mechanics may also fail due to extensive use. 

Symptoms of a bad drain pump include: 

• Incomplete draining of water at the end of cycles
• Puddles or standing water left in the bottom of the tub
• Smelly dishwasher from stagnant water issues 
• Error codes related to draining problems

This OEM GE part is also compatible with some Kenmore dishwashers. 

The Inlet Sump is an OEM replacement part for GE dishwashers. Located at the bottom of the dishwasher tub, the carefully contoured inlet sump collects and transports dirty wash water containing food debris to the filtration system. Its inlet ports and drainage routes optimize flow for thorough cleaning cycles. 

Symptoms of a problem with the inlet sump include:

• Poor drainage or water not properly collecting at the bottom of the tub
• Clogged or leaking drainage valves that impact water circulation  
• Buildup of food or grime that blocks water movement  

Causes can be normal wear and accumulation of debris over time. Mineral deposits from hard water may also cause drainage issues.

This part is also compatible with Hotpoint and some Kenmore dishwashers.

The Pump and Motor Assembly is an OEM replacement part for GE dishwashers. It works to circulate water throughout wash and rinse cycles. The motor spins the integrated pump impeller to draw fresh water into the dishwasher and drain used water.

Causes of a bad pump and motor assembly can include mineral buildup on pump parts inhibiting water flow, worn motor windings reducing efficiency, or damage from freezing temperatures.

Symptoms of a bad pump and motor assembly include:

• Inability to fill or drain water from the dishwasher
• Abnormal noises coming from the motor area
• Leaks or water not circulating properly

This OEM part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Pump Assembly is an OEM part for GE dishwashers. This component is responsible for removing water from the dishwasher during the drain cycle, ensuring that your dishes are cleaned and rinsed effectively. The pump works by expelling the used water through the drain hose and into the household plumbing.

Common causes of a bad drain pump assembly include blockages from debris, wear and tear from regular use, or electrical issues that prevent the pump from operating correctly.

Symptoms of a bad Drain Pump Assembly include:

• Dishwasher not draining properly
• Standing water in the bottom of the dishwasher
• Unusual noises during the drain cycle
• Dishwasher stopping mid-cycle with a full tub of water

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Pump Drain Assembly is an OEM part for GE dishwashers. This part effectively removes water from the dishwasher after the wash and rinse cycles, ensuring that your dishes are left clean and dry.

Causes of a bad pump drain assembly can include blockages from food particles or debris, wear and tear over time, or damage to the pump’s motor or internal components.  

Symptoms of a bad pump drain assembly include:

• Water not draining from the dishwasher
• Unusual noises during the drain cycle
• Standing water in the bottom of the dishwasher
• The dishwasher cycle not completing properly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Blower Motor Assembly is an OEM part for GE dishwashers. This part is responsible for driving the dishwasher's venting system, which plays a key role in the drying process of your dishes.

Over time, the Blower Motor Assembly may need replacement due to wear and tear, damage, or failure. A malfunctioning blower motor can lead to ineffective drying of dishes, increased cycle times, or the dishwasher failing to complete its drying cycle properly.

Symptoms of a bad Blower Motor Assembly include:

• Dishes remaining damp or wet even after the drying cycle is complete.
• Unusual noises coming from the dishwasher, indicating that the blower motor is struggling to operate.
• The dishwasher stopping or pausing during the drying cycle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Restore proper draining with this dishwasher drain pump assembly. It evacuates wastewater at the end of each wash and rinse, helping the tub empty fully so cycles finish correctly and standing water and drain errors are avoided. What it does:

• Drives an impeller to push water from the tub through the drain hose to household plumbing
• Activates during drain segments to clear the tub between and after cycles
• Helps resolve symptoms like water left in the bottom, slow or intermittent draining
• Addresses loud humming or grinding from the pump area and drain-related cycle interruptions

• 1 drain pump assembly

• Disconnect power at the breaker and turn off water before servicing
• Access from the lower front or bottom; place a towel or pan to catch residual water
• Label and unplug the wire connector, release the clamp/retainer, and remove the pump; transfer any model-specific seal or bracket if present
• Seat and align the new pump fully to avoid leaks, reconnect hoses/wires, then test for proper draining

The Sump Inlet is an OEM part for GE dishwashers. This part allows water to flow into the sump area, which collects and drains used wash water from the tub during the dishwashing cycle.

Causes of a bad part can range from clogs or obstructions preventing proper water flow, physical damage or cracks leading to leaks, or general wear and tear over time.

Symptoms of a bad Sump Inlet include:

• Failure of the dishwasher to fill with water
• Water leaks or puddling around the base of the dishwasher
• Excessive noise or gurgling sounds during operation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dishwasher sump inlet forms the sealed passage between the tub and the pump system, directing wash water out of the basin. Replacing a cracked or clogged inlet helps stop leaks and restores steady water circulation and cleaning performance.

• Channels water from the tub into the circulation/drain system
• Maintains a watertight seal at the tub floor to prevent leaks and air intrusion
• Helps preserve spray pressure and consistent wash performance
• Common symptoms of failure: water leaking under the unit, weak cleaning results, unusual pump noise, visible cracks or warping

• Disconnect power and water supply; wear cut-resistant gloves and place a towel or shallow pan to catch residual water
• Access may require removing the lower spray arm, filters, and toe panel; note hose/clamp orientation before removal
• Clean sealing surfaces before seating the new inlet; secure per model design and ensure all connections are tight
• Reassemble and run a short test cycle while inspecting for leaks

This inlet sump is the lower-tub water intake for the circulation system. It channels wash water to the pump and seals the connection, helping prevent leaks and restoring proper wash performance when the original is cracked, warped, or clogged.

• Directs wash water from the tub into the circulation pump
• Maintains a watertight seal at the pump/sump opening
• Common failure symptoms: water leaking from beneath the unit, poor cleaning results, unusual noise from the pump area
• Visual clues: cracks, deformation, or mineral buildup on the sump inlet

• Disconnect power and shut off the water supply before servicing
• Access is typically from inside the tub and/or the bottom; remove lower rack, spray arm, and sump cover as needed
• Transfer existing clamps/seals and inspect gaskets; replace any worn seals for a proper fit
• Seat the sump fully, secure connections, then run a short cycle to check for leaks

This sump cap seals the sump opening at the bottom of the dishwasher tub to contain wash water and protect the pump. Replace a cracked, loose, or missing cap to help prevent leaks and maintain proper wash performance. What it does:

• Seals the sump opening to keep water inside the tub and direct flow to the pump
• Helps keep debris out of the pump intake
• Restores a secure fit when the original cap is cracked, stripped, or warped
• Common symptoms: water leaking from the base, moisture under the dishwasher, visible damage, or a missing cap

• Disconnect power and turn off the water supply.
• Remove the lower rack and, if needed, the lower spray arm to access the sump.
• Remove the old cap and clean the sealing area; install the new cap and hand-tighten until snug—do not overtighten.
• Run a short cycle and check for leaks around the sump.

Vent driver assembly operates the dryer vent door to manage airflow during operation. Replacing a faulty driver restores proper vent door movement, improving exhaust flow and helping prevent backdrafts. What it does:

• Moves and positions the vent/duct door so exhaust can exit when the appliance runs
• Retracts/closes the vent door when the appliance stops to limit backdrafts
• Common symptoms: vent door won't open or close, reduced exhaust airflow, or visible vent door sticking
• Interfaces with the vent door linkage and the appliance wiring harness to receive control signals

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Basic hand tools are typically required; support the vent door assembly during removal/installation
• Handle wiring connectors and plastic components carefully to avoid damage
• Follow the appliance's service manual or OEM instructions for exact steps and torque/spec guidance