General Electric Range Burner & Related Parts

This Bake Burner Assembly is an OEM part for GE ovens and ranges. The bake burner assembly includes both the igniter and the burner tube. It is responsible for producing the flame that heats the air inside the oven cavity during baking and broiling.

Causes of a bad bake burner can include wear and tear from frequent use, clogging or blockage of gas ports, or damage from exposure to high temperatures and spills.

Symptoms of a bad bake burner include:

• Uneven baking or cooking results
• The oven not heating up properly or taking too long to reach the desired temperature
• Visible damage or corrosion on the burner
• The oven emitting unusual smells or noises during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Oven Bake Burner is an OEM part for GE gas ovens. It is responsible for providing the heat necessary for baking by distributing an even flame across the oven cavity. This burner tube measures approximately 20" in total length and 6" in height. This burner is compatible with both liquid propane (LP) and natural gas (NG) setups, with the settings determined by the regulator.

Causes of a bad oven bake burner can include wear and tear from frequent use, clogging from food debris or grease, or damage from exposure to high temperatures. A malfunctioning burner can lead to uneven cooking and longer baking times.

Symptoms of a bad Oven Bake Burner include:

• Uneven baking or cooking results
• Weak or no flame when the bake function is activated
• Delayed ignition or clicking sounds without ignition
• Unusual smells or visible damage to the burner

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Lower oven bake assembly that supplies heat for the bake cycle. Replaces a damaged lower element to help restore proper oven baking performance and even oven temperatures. What it does:

• Heats during the bake cycle to generate oven baking temperature.
• Replaces a burned-through or damaged lower bake element.
• Commonly used when the oven won't heat on bake, heats unevenly, or the element is visibly broken.
• Works with the oven's original terminals and mounting points to restore bake function.

• Disconnect power at the breaker before starting any repairs; verify power is off.
• Allow the oven and element to cool completely and handle the element gently to avoid damage.
• Installation may require removing the oven floor or back panel to access the element; follow the oven service manual for step-by-step instructions.

This hot-surface bake oven ignitor lights the gas burner for the oven so it reaches and holds baking temperatures. Replaces a weak or failed ignitor to restore reliable oven heating and consistent cooking results. What it does:

• Heats until hot enough to ignite the oven's gas burner for bake operations
• Restores normal preheat times and consistent oven temperature when the ignitor is failing
• Helps eliminate symptoms such as oven not heating, very slow preheat, or burner not staying lit
• Works as the direct ignition source for the bake burner assembly

• One bake oven hot-surface ignitor (WB13K10013)

• Disconnect power to the appliance and shut off the gas supply before starting work
• Handle the ceramic/glass element carefully—it's fragile and can crack if dropped or touched with bare hands
• Verify correct replacement part number for your appliance and test for gas leaks after installation

This oven burner assembly replaces a worn or damaged bake burner to restore reliable oven heating for gas ranges. Designed as a direct-fit assembly, it provides the burner tube and components needed for ignition and even baking performance. What it does

• Supplies the main bake flame for the oven cavity so the oven reaches and maintains cooking temperatures.
• Replaces cracked or corroded burner tubes that cause weak or no flame.
• Helps correct uneven heating or poor baking results linked to burner damage.
• Works with existing ignition and gas valve systems when properly installed.

• One complete oven burner assembly.

• Turn off gas supply and electrical power before beginning any service.
• Handle the burner and igniter carefully; avoid bending or damaging the tube or orifices.

This oven bake burner supplies the flame for the oven's baking and roasting functions, restoring even heating and reliable ignition. Use this part to replace a worn or damaged bake burner and help return your oven to working order. What it does:

• Directs and maintains the gas flame used for baking and roasting inside the oven cavity
• Helps restore consistent oven temperature and proper browning
• Commonly replaced when burner shows visible damage, uneven flame, or poor bake performance
• Works with the oven's ignition system to light the bake flame

• Turn off and disconnect gas supply and power before servicing
• Verify correct burner alignment and secure mounting for proper airflow and ignition
• Inspect and clean burner ports and surrounding areas; replace if warped, cracked, or excessively corroded
• Test for gas leaks after installation and before normal operation

The Burner Oven Bake Assembly is an OEM part for GE ranges. This part is responsible for providing the heat necessary to bake food in the oven. Located at the bottom of the oven, the bake burner ensures even and consistent heat distribution.

Causes of a bad bake burner can include wear and tear from regular use, buildup of food residue, or damage from overheating or physical impact.

Symptoms of a bad burner oven bake assembly include:

• The oven not heating up or taking too long to preheat
• Uneven baking results or hot spots in the oven
• A visible flame or the burner not igniting properly
• Unusual smells or noises coming from the oven during baking

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.