General Electric Range Wire, Harness, Power Cord

This line cord supplies electrical power from the wall outlet to the appliance. Replacing a worn, cut, or heat-damaged cord restores safe, reliable power and can help resolve no-power or intermittent operation issues.

• Delivers AC power from the outlet to the unit's electrical system
• Helps correct no-power or intermittent power when the cord is moved
• Ideal replacement for cords with cuts, fraying, or burn/discoloration on the plug
• Supports proper grounding and safe operation when installed correctly

• Disconnect power before servicing; ensure the appliance is fully de-energized
• Match wire routing and connections to the product's wiring diagram; ensure a secure ground
• Use an appropriate strain relief if required by the product to prevent abrasion
• Route the cord away from sharp edges, moving parts, and hot surfaces

This part includes replacement electrodes and a harness. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace damaged or defective electrodes on multiple models of gas powered stoves and ranges. These electrodes connect the spark igniters to the appliance in order to allow the gas cooktop to be ignited. If the spark igniters are not lighting, the electrodes may be the issue. Over time, electrodes can become worn or damaged and may require replacement. For safety purposes, always ensure the stove is completely disconnected from power and gas before starting the any repair work. Proper tools will be required to complete this process. Please make sure to follow appropriate safety precautions when attempting to repair any appliances. For more accurate information on how and where to install these electrodes and harness, the appropriate owner's manual and included diagrams should be referred to.As an authentic replacement part, this electrodes and harness kit is suitable for use on several different models of gas ovens, stoves, and ranges manufactured by General Electric and Hotpoint. This is a genuine part made of high-quality, durable materials and is sold individually.

This high-voltage spark ignition harness carries the spark module's output to the burner igniters so your gas burners light reliably. Replace a cracked, shorted, or burned harness to restore consistent ignition and reduce misfires or arcing.

• Distributes high-voltage pulses from the spark module to the burner igniters
• Insulated leads help prevent arcing, cross-firing, and shorts to chassis
• Failure symptoms can include no or weak spark on multiple burners, intermittent lighting, or visible burn/arc marks on the wiring
• Useful when the spark module and igniters test good but ignition remains unreliable

• Disconnect power and shut off gas before servicing; high voltage is present during operation
• Note original routing; keep wires away from sharp edges, moving parts, and hot surfaces
• Seat boots/connectors fully on the spark module and igniters; avoid kinking or stretching leads
• After installation, restore power and test spark at each burner before final reassembly

High-voltage harness routes power between high-voltage components in a microwave oven, restoring safe electrical connections and preventing intermittent operation or arcing when replacing a damaged or burned wiring assembly. What it does:

• Connects the microwave's high-voltage components to maintain proper power flow.
• Failing or damaged harnesses can cause no-heat, intermittent heating, arcing, burning smell, or blown fuses.
• Replaces frayed, melted, or corroded high-voltage wiring that risks shorting or unsafe operation.
• Designed to restore original electrical routing and secure connector fit for reliable operation.

• Disconnect power and unplug the appliance before servicing. Ensure the high-voltage capacitor is properly discharged—do not attempt service without this step.
• Inspect connectors, insulation, and routing; replace damaged clips or retainers and secure wiring away from sharp edges and moving parts.
• Follow the wiring diagram for correct connections.
• Never operate the appliance with covers or safety panels removed.

This harness burner box is the electrical ignition harness assembly that routes power and signals to the range/stove burner valves and igniters, restoring reliable spark and control at the burner module. What it does

• Routes ignition and valve control wiring between the cooktop control module and individual burner valves/igniters.
• Enables spark ignition and proper valve response so burners light when controls call for flame.
• Commonly replaces worn or damaged harnesses that cause intermittent ignition, no-spark, or unresponsive valves.
• Keeps wiring organized and secured inside the burner box to prevent chafing or shorts.

• One harness burner box assembly as shown.

• Disconnect electrical power and shut off gas supply before starting work.
• Handle connectors carefully; match wire connectors and routing to the original harness during replacement.
• Inspect surrounding terminals and components for heat or corrosion damage and replace if needed.

This harness burner box is the wiring assembly that routes power and ignition signals to a gas range's burner box, restoring reliable electrical connections for safe burner ignition and consistent operation. What it does:

• Routes power and ignition signals between the control valve, igniters and burner box components
• Provides factory-style connector interfaces to maintain correct electrical paths
• Helps resolve intermittent or no-ignition issues caused by damaged or loose wiring
• Reduces risk of arcing or shorting from frayed or burned harness wiring

• Always disconnect electrical power and shut off the gas supply before servicing
• Handle connectors gently and seat each connector fully to avoid loose connections
• Inspect surrounding insulation and connectors for heat or burn damage and replace if needed

This harness burner box is the wired ignition assembly that routes spark and power to a cooktop's burner valves and igniters, restoring reliable ignition and consistent burner operation. What it does

• Delivers spark and electrical connection to surface burner igniters and gas valve controls.
• Replaces damaged or frayed wiring that can prevent burners from sparking or lighting.
• Restores proper routing and secure connections to reduce intermittent ignition failures.
• Intended for use with compatible gas range cooktops that use a burner-box ignition harness.

• Designed for experienced DIYers; disconnect power and shut off gas before starting.
• Inspect mating connectors, igniters and valves while installing; replace any visibly damaged components.

This harness module is a factory-style wire harness assembly that routes power and control signals between the appliance control and service components, restoring reliable electrical connections and proper control operation. What it does

• Connects the main control board to heating elements, sensors, igniters or switches so commands and power reach working components
• Restores interrupted circuits caused by damaged or burned wires and faulty connector terminals
• Helps eliminate intermittent operation, unresponsive controls, or parts that fail to receive power
• Can resolve symptoms such as no-heat, burners/oven not responding, or error codes linked to open/shorted harness circuits

• Disconnect power to the appliance before servicing to avoid shock or damage
• Compare the harness to the old part and follow the appliance wiring diagram for correct routing and connector placement
• Inspect connector terminals and mating parts for damage before installation; replace any damaged clips or fasteners
• Secure the harness away from heat and moving parts and verify function before reassembling the appliance

The Burner Box Harness is an OEM part for GE gas cooktops and ranges. It is responsible for securely connecting wiring from the cooktop control board to the individual burner boxes located beneath each cooktop burner.

Causes of a bad burner box harness include worn, cracked, or damaged insulation coating the individual wires. Improper routing or bending of wires during installation or servicing can also weaken connections over time.

Symptoms of a bad burner box harness involve issues controlling specific burners such as:

• Burners failing to ignite during start-up
• Igniters or valves malfunctioning intermittently
• Error codes related to individual burner components

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Burner Box Harness is an OEM part for GE gas ranges. It connects burners to the main control unit for regulated heating.

Causes of failure include wire fatigue from repeated expansion/contraction during cooking, insulation cracks due to excessive heat exposure, and loose terminals. 

Symptoms of a faulty burner box harness include:

• Unstable or irregular burner flames 
• Inability to ignite or adjust specific burners
• Responsiveness issues with burners/control knobs 

This OEM part is also compatible with Hotpoint and RCA gas range models.

This wiring harness assembly routes power and signals to a gas range's burner box, restoring reliable ignition and control. It replaces a damaged or burned harness to help burners and oven components receive proper electrical connections. What it does

• Delivers power and ignition signals from the main control to burner valves and igniters
• Replaces frayed or heat-damaged wiring that can cause intermittent ignition or burner failure
• Helps correct symptoms such as burners not sparking, weak ignition, or oven not heating
• Maintains factory routing and connector fit for safe, reliable operation

• One harness, burner box assembly

• Disconnect electrical power and shut off the gas supply before starting work
• Handle wiring and connectors carefully; match connector shapes and routing to the original harness
• Secure wiring away from high-heat surfaces and moving parts during reassembly

This harness connects the burner box wiring to the cooktop's controls and safety devices, ensuring reliable ignition and proper sensor/valve communication. Replaces a damaged or worn burner-box harness to restore safe burner operation. What it does:

• Carries power and signals between igniters, flame sensors/thermocouples, and gas valves
• Supports ignition; failure can cause burners to not light or spark inconsistently
• Prevents intermittent operation caused by frayed wires, loose connectors, or heat damage
• Helps maintain correct sensor feedback for safe gas shutoff

• One burner box wiring harness

• Disconnect power and shut off gas supply before starting any repair
• Match connector styles and routing to the original harness; inspect nearby components for heat damage
• Use proper strain relief and secure fasteners to prevent contact with hot surfaces