General Electric Range Hinge Parts

I ordered both hinges (if the nylon roller was bad on the left, it was probably going to go bad on the right side as well). The web site was easy to navigate, order process simple. Hinges arrived quickly. Slide the oven door up and off. unscrew the three screws for the hinge. You need to then pull up with some force (there is a big spring in there), and twist the hinge to get the last bit out. I used a hemostat to hold the spring and keep it from falling back into the hole. removed the... Read more

• Door won't close

I ordered both hinges (if the nylon roller was bad on the left, it was probably going to go bad on the right side as well). The web site was easy to navigate, order process simple. Hinges arrived quickly. Slide the oven door up and off. unscrew the three screws for the hinge. You need to then pull up with some force (there is a big spring in there), and twist the hinge to get the last bit out. I used a hemostat to hold the spring and keep it from falling back into the hole. removed the... Read more

I always save original books and assembly sheets for appliances. That helped a lot ! The assembly sheets showed how the ovens went in, how they were attached to the cabinet and what to avoid so I didn’t bend trim piece. Original booklet showed how to replace oven doors and lights etc. Once the hinge assemblies arrived I started replacement after having read on the internet original hinges had some problems. So I had ordered both right and left hinges to avoid a possible problem with the... Read more

We had to pry the door open with a crow bar. We then ordered a replacement hinge from your company. We were able to find the part by looking at your diagram of our oven. We ordered it and it came in two days. My husband put it on and the door now works beautifully. Read more

By replacing the hinge. Read more

Great!! very simple replacement and easy. Read more

Tenants in rental unit explained problem, I ordered replacement hinges for both the left and right. After replacing both, it was determined that a cleaning person removed and didn't reinstall the bottom heat plate of oven back into position, which was the reason the door wasn't closing. Read more

YouTube video was very clear. Read more

The oven door was open and the wife fell onto the door. After that, the door would not close all the way and hung lower than it should. I could not tell if it was the hinge or hinge receiver that was bent so I ordered both. When the parts arrived I removed the door by unlatching the hinge and lifting it off the range. the door has 3 screws on the bottom and two at the top. Once the door was separated each hinge has three screws to remove and replace the hinge. Reassembled the door, reinstalled... Read more